Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jakob Hauser <jahau@rocketmail.com>
To:     Sebastian Reichel <sre@kernel.org>, Lee Jones <lee@kernel.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     Beomho Seo <beomho.seo@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Stephan Gerhold <stephan@gerhold.net>,
        Raymond Hackley <raymondhackley@protonmail.com>,
        Pavel Machek <pavel@ucw.cz>, Axel Lin <axel.lin@ingics.com>,
        ChiYuan Huang <cy_huang@richtek.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Henrik Grimler <henrik@grimler.se>,
        Christophe Jaillet <christophe.jaillet@wanadoo.fr>,
        linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht,
        Jakob Hauser <jahau@rocketmail.com>
Subject: [PATCH v6 04/10 RESEND] mfd: rt5033: Apply preparatory changes before adding rt5033-charger driver
Date:   Mon, 15 May 2023 22:57:13 +0200
Message-Id: <31c750ae13a1c1896b51d8f0a0d9869f8b85624f.1684182964.git.jahau@rocketmail.com>
In-Reply-To: <cover.1684182964.git.jahau@rocketmail.com>
References: <cover.1684182964.git.jahau@rocketmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Order the register blocks to have the masks in descending manner.

Add new defines for constant voltage shift (RT5033_CHGCTRL2_CV_SHIFT),
MIVR mask (RT5033_CHGCTRL4_MIVR_MASK), pre-charge current shift
(RT5033_CHGCTRL4_IPREC_SHIFT), internal timer disable
(RT5033_INT_TIMER_DISABLE), termination disable (RT5033_TE_DISABLE),
CFO disable (RT5033_CFO_DISABLE), UUG disable (RT5033_CHARGER_UUG_DISABLE).

The fast charge timer type needs to be written on mask 0x38
(RT5033_CHGCTRL3_TIMER_MASK). To avoid a bit shift on application, change the
values of the timer types to fit the mask. Added the timout duration as a
comment. And the timer between TIMER8 and TIMER12 is most likely TIMER10, see
e.g. RT5036 [1] page 28 bottom.

Add value options for MIVR (Minimum Input Voltage Regulation).

Move RT5033_TE_ENABLE_MASK to the block "RT5033 CHGCTRL1 register", in order
to have the masks of the register collected there. To fit the naming scheme,
rename it to RT5033_CHGCTRL1_TE_EN_MASK.

Move RT5033_CHG_MAX_CURRENT to the block "RT5033 charger fast-charge current".

Add new defines RT5033_CV_MAX_VOLTAGE and RT5033_CHG_MAX_PRE_CURRENT to the
blocks "RT5033 charger constant charge voltage" and "RT5033 charger pre-charge
current limits".

In include/linux/mfd/rt5033.h, turn power_supply "psy" into a pointer in order
to use it in devm_power_supply_register().

[1] https://media.digikey.com/pdf/Data%20Sheets/Richtek%20PDF/RT5036%20%20Preliminary.pdf

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
---
 include/linux/mfd/rt5033-private.h | 53 ++++++++++++++++++++----------
 include/linux/mfd/rt5033.h         |  2 +-
 2 files changed, 36 insertions(+), 19 deletions(-)

diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index b6773ebf4e6b..0221f806d139 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -55,22 +55,24 @@ enum rt5033_reg {
 };
 
 /* RT5033 Charger state register */
+#define RT5033_CHG_STAT_TYPE_MASK	0x60
+#define RT5033_CHG_STAT_TYPE_PRE	0x20
+#define RT5033_CHG_STAT_TYPE_FAST	0x60
 #define RT5033_CHG_STAT_MASK		0x30
 #define RT5033_CHG_STAT_DISCHARGING	0x00
 #define RT5033_CHG_STAT_FULL		0x10
 #define RT5033_CHG_STAT_CHARGING	0x20
 #define RT5033_CHG_STAT_NOT_CHARGING	0x30
-#define RT5033_CHG_STAT_TYPE_MASK	0x60
-#define RT5033_CHG_STAT_TYPE_PRE	0x20
-#define RT5033_CHG_STAT_TYPE_FAST	0x60
 
 /* RT5033 CHGCTRL1 register */
 #define RT5033_CHGCTRL1_IAICR_MASK	0xe0
-#define RT5033_CHGCTRL1_MODE_MASK	0x01
+#define RT5033_CHGCTRL1_TE_EN_MASK	0x08
 #define RT5033_CHGCTRL1_HZ_MASK		0x02
+#define RT5033_CHGCTRL1_MODE_MASK	0x01
 
 /* RT5033 CHGCTRL2 register */
 #define RT5033_CHGCTRL2_CV_MASK		0xfc
+#define RT5033_CHGCTRL2_CV_SHIFT	0x02
 
 /* RT5033 DEVICE_ID register */
 #define RT5033_VENDOR_ID_MASK		0xf0
@@ -82,14 +84,15 @@ enum rt5033_reg {
 #define RT5033_CHGCTRL3_TIMER_EN_MASK	0x01
 
 /* RT5033 CHGCTRL4 register */
-#define RT5033_CHGCTRL4_EOC_MASK	0x07
+#define RT5033_CHGCTRL4_MIVR_MASK	0xe0
 #define RT5033_CHGCTRL4_IPREC_MASK	0x18
+#define RT5033_CHGCTRL4_IPREC_SHIFT	0x03
+#define RT5033_CHGCTRL4_EOC_MASK	0x07
 
 /* RT5033 CHGCTRL5 register */
-#define RT5033_CHGCTRL5_VPREC_MASK	0x0f
 #define RT5033_CHGCTRL5_ICHG_MASK	0xf0
 #define RT5033_CHGCTRL5_ICHG_SHIFT	0x04
-#define RT5033_CHG_MAX_CURRENT		0x0d
+#define RT5033_CHGCTRL5_VPREC_MASK	0x0f
 
 /* RT5033 RT CTRL1 register */
 #define RT5033_RT_CTRL1_UUG_MASK	0x02
@@ -128,20 +131,28 @@ enum rt5033_reg {
 #define RT5033_AICR_1500_MODE			0xc0
 #define RT5033_AICR_2000_MODE			0xe0
 
-/* RT5033 use internal timer need to set time */
-#define RT5033_FAST_CHARGE_TIMER4		0x00
-#define RT5033_FAST_CHARGE_TIMER6		0x01
-#define RT5033_FAST_CHARGE_TIMER8		0x02
-#define RT5033_FAST_CHARGE_TIMER9		0x03
-#define RT5033_FAST_CHARGE_TIMER12		0x04
-#define RT5033_FAST_CHARGE_TIMER14		0x05
-#define RT5033_FAST_CHARGE_TIMER16		0x06
+/* RT5033 charger minimum input voltage regulation */
+#define RT5033_CHARGER_MIVR_DISABLE		0x00
+#define RT5033_CHARGER_MIVR_4200MV		0x20
+#define RT5033_CHARGER_MIVR_4300MV		0x40
+#define RT5033_CHARGER_MIVR_4400MV		0x60
+#define RT5033_CHARGER_MIVR_4500MV		0x80
+#define RT5033_CHARGER_MIVR_4600MV		0xa0
+#define RT5033_CHARGER_MIVR_4700MV		0xc0
+#define RT5033_CHARGER_MIVR_4800MV		0xe0
 
+/* RT5033 use internal timer need to set time */
+#define RT5033_FAST_CHARGE_TIMER4		0x00 /*  4 hrs */
+#define RT5033_FAST_CHARGE_TIMER6		0x08 /*  6 hrs */
+#define RT5033_FAST_CHARGE_TIMER8		0x10 /*  8 hrs */
+#define RT5033_FAST_CHARGE_TIMER10		0x18 /* 10 hrs */
+#define RT5033_FAST_CHARGE_TIMER12		0x20 /* 12 hrs */
+#define RT5033_FAST_CHARGE_TIMER14		0x28 /* 14 hrs */
+#define RT5033_FAST_CHARGE_TIMER16		0x30 /* 16 hrs */
+
+#define RT5033_INT_TIMER_DISABLE		0x00
 #define RT5033_INT_TIMER_ENABLE			0x01
 
-/* RT5033 charger termination enable mask */
-#define RT5033_TE_ENABLE_MASK			0x08
-
 /*
  * RT5033 charger opa mode. RT5033 has two opa modes for OTG: charger mode
  * and boost mode.
@@ -150,25 +161,30 @@ enum rt5033_reg {
 #define RT5033_BOOST_MODE			0x01
 
 /* RT5033 charger termination enable */
+#define RT5033_TE_DISABLE			0x00
 #define RT5033_TE_ENABLE			0x08
 
 /* RT5033 charger CFO enable */
+#define RT5033_CFO_DISABLE			0x00
 #define RT5033_CFO_ENABLE			0x40
 
 /* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
 #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN	3650000U
 #define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM   25000U
 #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX	4400000U
+#define RT5033_CV_MAX_VOLTAGE			0x1e
 
 /* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
 #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN	350000U
 #define RT5033_CHARGER_PRE_CURRENT_STEP_NUM	100000U
 #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX	650000U
+#define RT5033_CHG_MAX_PRE_CURRENT		0x03
 
 /* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
 #define RT5033_CHARGER_FAST_CURRENT_MIN		700000U
 #define RT5033_CHARGER_FAST_CURRENT_STEP_NUM	100000U
 #define RT5033_CHARGER_FAST_CURRENT_MAX		2000000U
+#define RT5033_CHG_MAX_CURRENT			0x0d
 
 /*
  * RT5033 charger const-charge end of charger current (
@@ -192,6 +208,7 @@ enum rt5033_reg {
  * RT5033 charger UUG. It enables MOS auto control by H/W charger
  * circuit.
  */
+#define RT5033_CHARGER_UUG_DISABLE		0x00
 #define RT5033_CHARGER_UUG_ENABLE		0x02
 
 /* RT5033 charger high impedance mode */
diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
index 8f306ac15a27..e99e2ab0c1c1 100644
--- a/include/linux/mfd/rt5033.h
+++ b/include/linux/mfd/rt5033.h
@@ -51,7 +51,7 @@ struct rt5033_charger_data {
 struct rt5033_charger {
 	struct device			*dev;
 	struct rt5033_dev		*rt5033;
-	struct power_supply		psy;
+	struct power_supply		*psy;
 	struct rt5033_charger_data	*chg;
 };
 
-- 
2.39.2