Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759460AbXJEQfa (ORCPT ); Fri, 5 Oct 2007 12:35:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753733AbXJEQfN (ORCPT ); Fri, 5 Oct 2007 12:35:13 -0400 Received: from threatwall.zlynx.org ([199.45.143.218]:35452 "EHLO zlynx.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753242AbXJEQfC (ORCPT ); Fri, 5 Oct 2007 12:35:02 -0400 Subject: 2.6.23-rc8-mm2 ACPI Battery Info in /sys but not /proc/acpi From: Zan Lynx To: Andrew Morton Cc: Linux Kernel , linux-acpi@vger.kernel.org Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-k7Q2jzq8vDRQ/GdXH0MO" Date: Fri, 05 Oct 2007 10:34:57 -0600 Message-Id: <1191602098.61085.12.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.10.3 X-Envelope-From: zlynx@acm.org X-Spam-Id: 20071005/1Idq8g-00069q-3T-linux-kernel@vger.kernel.org:zlynx@acm.org:199.45.143.218 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 139297 Lines: 4281 --=-k7Q2jzq8vDRQ/GdXH0MO Content-Type: text/plain Content-Transfer-Encoding: quoted-printable I have these directories in /proc: /proc/acpi /proc/acpi/thermal_zone /proc/acpi/thermal_zone/THRM /proc/acpi/processor /proc/acpi/processor/CPU0 /proc/acpi/video /proc/acpi/video/VGA /proc/acpi/video/VGA/TV /proc/acpi/video/VGA/LCD /proc/acpi/video/VGA/CRT /proc/acpi/fan /proc/acpi/button /proc/acpi/button/lid /proc/acpi/button/lid/LID /proc/acpi/button/power /proc/acpi/button/power/PWRB /proc/acpi/button/power/PWRF /proc/acpi/ac_adapter /proc/acpi/ac_adapter/ACAD /proc/acpi/power_resource /proc/acpi/embedded_controller /proc/acpi/embedded_controller/EC0 but not the battery information. In /sys I have: /sys/class/power_supply/BAT1 which is a link to: ../../devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/PNP0C0A:00/power_s= upply/BAT1 and *that* directory contains all the battery information. This is causing all sorts of problems for me. If I disconnect the AC power from the laptop, the scripts immediately send it into hibernate mode because battery level is not found / 0%. None of my monitoring tools can report estimated run-time. Etc, etc. Here is the .config: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.23-rc8-mm2 # Thu Oct 4 20:44:27 2007 # CONFIG_X86_64=3Dy CONFIG_64BIT=3Dy CONFIG_X86=3Dy CONFIG_GENERIC_TIME=3Dy CONFIG_GENERIC_CLOCKEVENTS=3Dy CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=3Dy CONFIG_NONIRQ_WAKEUP=3Dy CONFIG_GENERIC_TIME_VSYSCALL=3Dy CONFIG_GENERIC_CMOS_UPDATE=3Dy CONFIG_ZONE_DMA32=3Dy CONFIG_LOCKDEP_SUPPORT=3Dy CONFIG_STACKTRACE_SUPPORT=3Dy CONFIG_SEMAPHORE_SLEEPERS=3Dy CONFIG_MMU=3Dy CONFIG_ZONE_DMA=3Dy CONFIG_RWSEM_GENERIC_SPINLOCK=3Dy CONFIG_GENERIC_HWEIGHT=3Dy CONFIG_GENERIC_CALIBRATE_DELAY=3Dy CONFIG_X86_CMPXCHG=3Dy CONFIG_EARLY_PRINTK=3Dy CONFIG_GENERIC_ISA_DMA=3Dy CONFIG_GENERIC_IOMAP=3Dy CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy CONFIG_ARCH_POPULATES_NODE_MAP=3Dy CONFIG_DMI=3Dy CONFIG_AUDIT_ARCH=3Dy CONFIG_GENERIC_BUG=3Dy # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=3Dy CONFIG_LOCK_KERNEL=3Dy CONFIG_INIT_ENV_ARG_LIMIT=3D32 CONFIG_LOCALVERSION=3D"" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=3Dy CONFIG_SYSVIPC=3Dy CONFIG_SYSVIPC_SYSCTL=3Dy CONFIG_POSIX_MQUEUE=3Dy # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_TASKSTATS=3Dy CONFIG_TASK_DELAY_ACCT=3Dy CONFIG_TASK_XACCT=3Dy CONFIG_TASK_IO_ACCOUNTING=3Dy # CONFIG_USER_NS is not set CONFIG_AUDIT=3Dy CONFIG_AUDITSYSCALL=3Dy CONFIG_AUDIT_TREE=3Dy CONFIG_IKCONFIG=3Dy CONFIG_IKCONFIG_PROC=3Dy CONFIG_LOG_BUF_SHIFT=3D18 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=3Dy CONFIG_FAIR_USER_SCHED=3Dy # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=3Dy CONFIG_BLK_DEV_INITRD=3Dy CONFIG_INITRAMFS_SOURCE=3D"/initramfs" CONFIG_INITRAMFS_ROOT_UID=3D0 CONFIG_INITRAMFS_ROOT_GID=3D0 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=3Dy # CONFIG_EMBEDDED is not set CONFIG_UID16=3Dy CONFIG_SYSCTL_SYSCALL=3Dy CONFIG_KALLSYMS=3Dy CONFIG_KALLSYMS_ALL=3Dy # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=3Dy CONFIG_PRINTK=3Dy CONFIG_BUG=3Dy CONFIG_ELF_CORE=3Dy CONFIG_BASE_FULL=3Dy CONFIG_FUTEX=3Dy CONFIG_ANON_INODES=3Dy CONFIG_EPOLL=3Dy CONFIG_SIGNALFD=3Dy CONFIG_EVENTFD=3Dy CONFIG_SHMEM=3Dy CONFIG_VM_EVENT_COUNTERS=3Dy CONFIG_SLUB_DEBUG=3Dy # CONFIG_SLAB is not set CONFIG_SLUB=3Dy # CONFIG_SLOB is not set CONFIG_PROC_PAGE_MONITOR=3Dy CONFIG_PROC_KPAGEMAP=3Dy CONFIG_RT_MUTEXES=3Dy # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=3D0 CONFIG_MODULES=3Dy CONFIG_MODULE_UNLOAD=3Dy CONFIG_MODULE_FORCE_UNLOAD=3Dy # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=3Dy CONFIG_STOP_MACHINE=3Dy CONFIG_BLOCK=3Dy CONFIG_BLK_DEV_IO_TRACE=3Dy CONFIG_BLK_DEV_BSG=3Dy # # IO Schedulers # CONFIG_IOSCHED_NOOP=3Dy CONFIG_IOSCHED_AS=3Dy CONFIG_IOSCHED_DEADLINE=3Dy CONFIG_IOSCHED_CFQ=3Dy # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=3Dy # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=3D"cfq" # # Processor type and features # CONFIG_TICK_ONESHOT=3Dy CONFIG_NO_HZ=3Dy CONFIG_HIGH_RES_TIMERS=3Dy CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy CONFIG_X86_PC=3Dy # CONFIG_X86_VSMP is not set CONFIG_MK8=3Dy # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=3D64 CONFIG_X86_L1_CACHE_SHIFT=3D6 CONFIG_X86_INTERNODE_CACHE_BYTES=3D64 CONFIG_X86_TSC=3Dy CONFIG_X86_GOOD_APIC=3Dy # CONFIG_MICROCODE is not set CONFIG_X86_MSR=3Dy CONFIG_X86_CPUID=3Dy CONFIG_X86_IO_APIC=3Dy CONFIG_X86_LOCAL_APIC=3Dy CONFIG_MTRR=3Dy CONFIG_SMP=3Dy # CONFIG_SCHED_SMT is not set # CONFIG_SCHED_MC is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=3Dy # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=3Dy CONFIG_ARCH_FLATMEM_ENABLE=3Dy CONFIG_SELECT_MEMORY_MODEL=3Dy CONFIG_FLATMEM_MANUAL=3Dy # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=3Dy CONFIG_FLAT_NODE_MEM_MAP=3Dy # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=3Dy CONFIG_SPLIT_PTLOCK_CPUS=3D4 CONFIG_RESOURCES_64BIT=3Dy CONFIG_ZONE_DMA_FLAG=3D1 CONFIG_BOUNCE=3Dy CONFIG_VIRT_TO_BUS=3Dy CONFIG_NR_CPUS=3D8 CONFIG_PHYSICAL_ALIGN=3D0x200000 CONFIG_HOTPLUG_CPU=3Dy CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=3Dy CONFIG_HPET_TIMER=3Dy CONFIG_HPET_EMULATE_RTC=3Dy CONFIG_IOMMU=3Dy # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=3Dy CONFIG_X86_MCE=3Dy # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=3Dy CONFIG_KEXEC=3Dy # CONFIG_CRASH_DUMP is not set # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_START=3D0x200000 CONFIG_SECCOMP=3Dy CONFIG_CC_STACKPROTECTOR=3Dy # CONFIG_CC_STACKPROTECTOR_ALL is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=3Dy CONFIG_HZ=3D1000 CONFIG_K8_NB=3Dy CONFIG_GENERIC_HARDIRQS=3Dy CONFIG_GENERIC_IRQ_PROBE=3Dy CONFIG_ISA_DMA_API=3Dy CONFIG_GENERIC_PENDING_IRQ=3Dy # # Power management options # CONFIG_PM=3Dy # CONFIG_PM_LEGACY is not set CONFIG_PM_DEBUG=3Dy # CONFIG_PM_VERBOSE is not set # CONFIG_PM_TRACE is not set CONFIG_PM_SLEEP_SMP=3Dy CONFIG_PM_SLEEP=3Dy CONFIG_SUSPEND_SMP_POSSIBLE=3Dy CONFIG_SUSPEND=3Dy CONFIG_HIBERNATION_SMP_POSSIBLE=3Dy CONFIG_HIBERNATION=3Dy CONFIG_PM_STD_PARTITION=3D"/dev/sda3" CONFIG_ARCH_HIBERNATION_HEADER=3Dy CONFIG_ACPI=3Dy CONFIG_ACPI_SLEEP=3Dy # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROC_EVENT=3Dy CONFIG_ACPI_AC=3Dy CONFIG_ACPI_BATTERY=3Dy CONFIG_ACPI_BUTTON=3Dy CONFIG_ACPI_VIDEO=3Dy CONFIG_ACPI_FAN=3Dy CONFIG_ACPI_DOCK=3Dy CONFIG_ACPI_BAY=3Dy CONFIG_ACPI_PROCESSOR=3Dy CONFIG_ACPI_HOTPLUG_CPU=3Dy CONFIG_ACPI_THERMAL=3Dy # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=3D0 CONFIG_ACPI_DEBUG=3Dy # CONFIG_ACPI_DEBUG_FUNC_TRACE is not set CONFIG_ACPI_EC=3Dy CONFIG_ACPI_POWER=3Dy CONFIG_ACPI_SYSTEM=3Dy CONFIG_X86_PM_TIMER=3Dy CONFIG_ACPI_CONTAINER=3Dy # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=3Dy CONFIG_CPU_FREQ_TABLE=3Dy # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=3Dy CONFIG_CPU_FREQ_STAT_DETAILS=3Dy # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=3Dy # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=3Dy CONFIG_CPU_FREQ_GOV_POWERSAVE=3Dy CONFIG_CPU_FREQ_GOV_USERSPACE=3Dy CONFIG_CPU_FREQ_GOV_ONDEMAND=3Dy CONFIG_CPU_FREQ_GOV_CONSERVATIVE=3Dy # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=3Dy CONFIG_X86_POWERNOW_K8_ACPI=3Dy # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_ACPI_CPUFREQ=3Dy # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=3Dy CONFIG_PCI_DIRECT=3Dy CONFIG_PCI_MMCONFIG=3Dy # CONFIG_DMAR is not set # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=3Dy CONFIG_PCI_MSI=3Dy # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=3Dy CONFIG_PCCARD=3Dy CONFIG_PCMCIA_DEBUG=3Dy CONFIG_PCMCIA=3Dy CONFIG_PCMCIA_LOAD_CIS=3Dy CONFIG_CARDBUS=3Dy # # PC-card bridges # CONFIG_YENTA=3Dy CONFIG_YENTA_O2=3Dy CONFIG_YENTA_RICOH=3Dy CONFIG_YENTA_TI=3Dy CONFIG_YENTA_ENE_TUNE=3Dy CONFIG_YENTA_TOSHIBA=3Dy # CONFIG_PD6729 is not set # CONFIG_I82092 is not set CONFIG_PCCARD_NONSTATIC=3Dy # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=3Dy CONFIG_BINFMT_MISC=3Dy CONFIG_IA32_EMULATION=3Dy CONFIG_IA32_AOUT=3Dy CONFIG_COMPAT=3Dy CONFIG_COMPAT_FOR_U64_ALIGNMENT=3Dy CONFIG_SYSVIPC_COMPAT=3Dy # # Networking # CONFIG_NET=3Dy # # Networking options # CONFIG_PACKET=3Dy CONFIG_PACKET_MMAP=3Dy CONFIG_UNIX=3Dy CONFIG_XFRM=3Dy CONFIG_XFRM_USER=3Dy # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=3Dy CONFIG_NET_KEY=3Dy CONFIG_NET_KEY_MIGRATE=3Dy CONFIG_INET=3Dy CONFIG_IP_MULTICAST=3Dy # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=3Dy # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=3Dm CONFIG_NET_IPGRE=3Dm # CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set CONFIG_INET_AH=3Dm CONFIG_INET_ESP=3Dm CONFIG_INET_IPCOMP=3Dm CONFIG_INET_XFRM_TUNNEL=3Dm CONFIG_INET_TUNNEL=3Dm CONFIG_INET_XFRM_MODE_TRANSPORT=3Dy CONFIG_INET_XFRM_MODE_TUNNEL=3Dy CONFIG_INET_XFRM_MODE_BEET=3Dy CONFIG_INET_LRO=3Dy CONFIG_INET_DIAG=3Dy CONFIG_INET_TCP_DIAG=3Dy # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=3Dy CONFIG_DEFAULT_TCP_CONG=3D"cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=3Dm # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set CONFIG_INET6_TUNNEL=3Dm # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=3Dm CONFIG_IPV6_TUNNEL=3Dm # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set CONFIG_IP_DCCP=3Dm CONFIG_INET_DCCP_DIAG=3Dm CONFIG_IP_DCCP_ACKVEC=3Dy # # DCCP CCIDs Configuration (EXPERIMENTAL) # CONFIG_IP_DCCP_CCID2=3Dm # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=3Dm CONFIG_IP_DCCP_TFRC_LIB=3Dm # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=3D100 # # DCCP Kernel Hacking # CONFIG_IP_DCCP_DEBUG=3Dy # CONFIG_NET_DCCPPROBE is not set CONFIG_IP_SCTP=3Dm # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set CONFIG_SCTP_HMAC_SHA1=3Dy # CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=3Dm # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set CONFIG_NET_SCH_FIFO=3Dy # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set CONFIG_BT=3Dm CONFIG_BT_L2CAP=3Dm CONFIG_BT_SCO=3Dm CONFIG_BT_RFCOMM=3Dm CONFIG_BT_RFCOMM_TTY=3Dy CONFIG_BT_BNEP=3Dm CONFIG_BT_BNEP_MC_FILTER=3Dy CONFIG_BT_BNEP_PROTO_FILTER=3Dy CONFIG_BT_HIDP=3Dm # # Bluetooth device drivers # CONFIG_BT_HCIUSB=3Dm CONFIG_BT_HCIUSB_SCO=3Dy CONFIG_BT_HCIUART=3Dm CONFIG_BT_HCIUART_H4=3Dy CONFIG_BT_HCIUART_BCSP=3Dy CONFIG_BT_HCIBCM203X=3Dm CONFIG_BT_HCIBPA10X=3Dm CONFIG_BT_HCIBFUSB=3Dm CONFIG_BT_HCIDTL1=3Dm CONFIG_BT_HCIBT3C=3Dm CONFIG_BT_HCIBLUECARD=3Dm CONFIG_BT_HCIBTUART=3Dm CONFIG_BT_HCIVHCI=3Dm # CONFIG_AF_RXRPC is not set # # Wireless # CONFIG_CFG80211=3Dm CONFIG_NL80211=3Dy CONFIG_WIRELESS_EXT=3Dy CONFIG_MAC80211=3Dm CONFIG_MAC80211_LEDS=3Dy CONFIG_MAC80211_DEBUGFS=3Dy CONFIG_MAC80211_DEBUG=3Dy CONFIG_MAC80211_VERBOSE_DEBUG=3Dy CONFIG_MAC80211_LOWTX_FRAME_DUMP=3Dy CONFIG_TKIP_DEBUG=3Dy CONFIG_MAC80211_DEBUG_COUNTERS=3Dy # CONFIG_MAC80211_IBSS_DEBUG is not set # CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set CONFIG_IEEE80211=3Dm CONFIG_IEEE80211_DEBUG=3Dy CONFIG_IEEE80211_CRYPT_WEP=3Dm CONFIG_IEEE80211_CRYPT_CCMP=3Dm CONFIG_IEEE80211_CRYPT_TKIP=3Dm CONFIG_IEEE80211_SOFTMAC=3Dm CONFIG_IEEE80211_SOFTMAC_DEBUG=3Dy # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug" CONFIG_STANDALONE=3Dy CONFIG_PREVENT_FIRMWARE_BUILD=3Dy CONFIG_FW_LOADER=3Dy # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=3Dm # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=3Dy # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=3Dy CONFIG_BLK_DEV=3Dy # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=3Dy # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_UB=3Dm # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=3Dm CONFIG_CDROM_PKTCDVD_BUFFERS=3D8 CONFIG_CDROM_PKTCDVD_WCACHE=3Dy # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=3Dy # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set CONFIG_TIFM_CORE=3Dm CONFIG_TIFM_7XX1=3Dm # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=3Dy CONFIG_SCSI_DMA=3Dy CONFIG_SCSI_TGT=3Dm # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=3Dy # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=3Dy # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=3Dm CONFIG_CHR_DEV_SCH=3Dm # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=3Dy # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=3Dy CONFIG_SCSI_WAIT_SCAN=3Dm # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=3Dy # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=3Dy # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=3Dy # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set CONFIG_PATA_AMD=3Dy # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set CONFIG_ATA_GENERIC=3Dy # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set CONFIG_PATA_PCMCIA=3Dy # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=3Dy # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=3Dm # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=3Dm CONFIG_DM_SNAPSHOT=3Dm CONFIG_DM_MIRROR=3Dm CONFIG_DM_ZERO=3Dm # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=3Dy # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set CONFIG_BONDING=3Dm # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=3Dm CONFIG_VETH=3Dm # CONFIG_NET_SB1000 is not set # CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=3Dy # # MII PHY device drivers # CONFIG_MARVELL_PHY=3Dy CONFIG_DAVICOM_PHY=3Dy CONFIG_QSEMI_PHY=3Dy CONFIG_LXT_PHY=3Dy CONFIG_CICADA_PHY=3Dy CONFIG_VITESSE_PHY=3Dy CONFIG_SMSC_PHY=3Dy CONFIG_BROADCOM_PHY=3Dy CONFIG_ICPLUS_PHY=3Dy # CONFIG_FIXED_PHY is not set CONFIG_NET_ETHERNET=3Dy CONFIG_MII=3Dy # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=3Dy # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=3Dy # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=3Dy # CONFIG_PCMCIA_RAYCS is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set # CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_USB_ATMEL is not set # CONFIG_ATMEL is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_BCM43XX is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # # USB Network Adapters # CONFIG_USB_CATC=3Dm CONFIG_USB_KAWETH=3Dm CONFIG_USB_PEGASUS=3Dm CONFIG_USB_RTL8150=3Dm CONFIG_USB_USBNET_MII=3Dm CONFIG_USB_USBNET=3Dm CONFIG_USB_NET_AX8817X=3Dm CONFIG_USB_NET_CDCETHER=3Dm # CONFIG_USB_NET_DM9601 is not set CONFIG_USB_NET_GL620A=3Dm CONFIG_USB_NET_NET1080=3Dm CONFIG_USB_NET_PLUSB=3Dm # CONFIG_USB_NET_MCS7830 is not set CONFIG_USB_NET_RNDIS_HOST=3Dm CONFIG_USB_NET_CDC_SUBSET=3Dm CONFIG_USB_ALI_M5632=3Dy CONFIG_USB_AN2720=3Dy CONFIG_USB_BELKIN=3Dy CONFIG_USB_ARMLINUX=3Dy CONFIG_USB_EPSON2888=3Dy CONFIG_USB_KC2190=3Dy CONFIG_USB_NET_ZAURUS=3Dm CONFIG_NET_PCMCIA=3Dy CONFIG_PCMCIA_3C589=3Dm CONFIG_PCMCIA_3C574=3Dm CONFIG_PCMCIA_FMVJ18X=3Dm CONFIG_PCMCIA_PCNET=3Dm CONFIG_PCMCIA_NMCLAN=3Dm CONFIG_PCMCIA_SMC91C92=3Dm CONFIG_PCMCIA_XIRC2PS=3Dm CONFIG_PCMCIA_AXNET=3Dm # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=3Dm CONFIG_PPP_MULTILINK=3Dy CONFIG_PPP_FILTER=3Dy CONFIG_PPP_ASYNC=3Dm # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=3Dm CONFIG_PPP_BSDCOMP=3Dm CONFIG_PPP_MPPE=3Dm CONFIG_PPPOE=3Dm CONFIG_PPPOL2TP=3Dm # CONFIG_SLIP is not set CONFIG_SLHC=3Dm # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=3Dm CONFIG_NETCONSOLE_DYNAMIC=3Dy CONFIG_NETPOLL=3Dy # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=3Dy # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=3Dy # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=3Dy CONFIG_INPUT_MOUSEDEV_PSAUX=3Dy CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D640 CONFIG_INPUT_JOYDEV=3Dm # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=3Dm # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=3Dy CONFIG_KEYBOARD_ATKBD=3Dy # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=3Dy CONFIG_MOUSE_PS2=3Dm CONFIG_MOUSE_PS2_ALPS=3Dy CONFIG_MOUSE_PS2_LOGIPS2PP=3Dy CONFIG_MOUSE_PS2_SYNAPTICS=3Dy CONFIG_MOUSE_PS2_LIFEBOOK=3Dy CONFIG_MOUSE_PS2_TRACKPOINT=3Dy # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=3Dy CONFIG_SERIO_I8042=3Dy # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=3Dy CONFIG_SERIO_RAW=3Dm # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=3Dy # CONFIG_VT_UNICODE is not set CONFIG_VT_CONSOLE=3Dy CONFIG_HW_CONSOLE=3Dy # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set CONFIG_FIX_EARLYCON_MEM=3Dy # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=3Dy # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=3Dy # CONFIG_HW_RANDOM_INTEL is not set CONFIG_HW_RANDOM_AMD=3Dy CONFIG_NVRAM=3Dm CONFIG_RTC=3Dy # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_AGP=3Dy CONFIG_AGP_AMD64=3Dy # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_IPWIRELESS_CS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=3Dy # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=3Dy CONFIG_HANGCHECK_TIMER=3Dy # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=3Dy # CONFIG_I2C is not set # # SPI support # CONFIG_SPI=3Dy # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=3Dy # # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=3Dm # # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=3Dy # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=3Dy CONFIG_SSB=3Dm CONFIG_SSB_PCIHOST_POSSIBLE=3Dy CONFIG_SSB_PCIHOST=3Dy CONFIG_SSB_PCMCIAHOST_POSSIBLE=3Dy CONFIG_SSB_PCMCIAHOST=3Dy CONFIG_SSB_DEBUG=3Dy CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=3Dy CONFIG_SSB_DRIVER_PCICORE=3Dy # CONFIG_WATCHDOG is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_DAB is not set # # Graphics support # CONFIG_BACKLIGHT_LCD_SUPPORT=3Dy CONFIG_LCD_CLASS_DEVICE=3Dy # CONFIG_LCD_LTV350QV is not set CONFIG_BACKLIGHT_CLASS_DEVICE=3Dy # CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=3Dm # # Display hardware drivers # # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=3Dy # CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=3Dy # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=3Dy CONFIG_DUMMY_CONSOLE=3Dy # # Sound # CONFIG_SOUND=3Dy # # Advanced Linux Sound Architecture # CONFIG_SND=3Dm CONFIG_SND_TIMER=3Dm CONFIG_SND_PCM=3Dm # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=3Dy CONFIG_SND_MIXER_OSS=3Dm CONFIG_SND_PCM_OSS=3Dm CONFIG_SND_PCM_OSS_PLUGINS=3Dy CONFIG_SND_RTCTIMER=3Dm # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=3Dy # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_AC97_CODEC=3Dm # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=3Dm # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_AC97_POWER_SAVE=3Dy CONFIG_SND_AC97_POWER_SAVE_DEFAULT=3D1 # # SPI devices # # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # Open Sound System # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=3Dm CONFIG_HID_SUPPORT=3Dy CONFIG_HID=3Dm CONFIG_HID_DEBUG=3Dy # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=3Dm # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_SUPPORT=3Dy CONFIG_USB_ARCH_HAS_HCD=3Dy CONFIG_USB_ARCH_HAS_OHCI=3Dy CONFIG_USB_ARCH_HAS_EHCI=3Dy CONFIG_USB=3Dm CONFIG_USB_DEBUG=3Dy # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=3Dy # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=3Dy CONFIG_USB_SUSPEND=3Dy # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=3Dm CONFIG_USB_EHCI_SPLIT_ISO=3Dy CONFIG_USB_EHCI_ROOT_HUB_TT=3Dy CONFIG_USB_EHCI_TT_NEWSCHED=3Dy # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=3Dm # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=3Dy # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=3Dm CONFIG_USB_PRINTER=3Dm # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=3Dm # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=3Dy CONFIG_USB_STORAGE_FREECOM=3Dy CONFIG_USB_STORAGE_DPCM=3Dy CONFIG_USB_STORAGE_USBAT=3Dy CONFIG_USB_STORAGE_SDDR09=3Dy CONFIG_USB_STORAGE_SDDR55=3Dy CONFIG_USB_STORAGE_JUMPSHOT=3Dy CONFIG_USB_STORAGE_ALAUDA=3Dy CONFIG_USB_STORAGE_KARMA=3Dy CONFIG_USB_LIBUSUAL=3Dy # # USB Imaging devices # CONFIG_USB_MDC800=3Dm # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=3Dy # # USB port drivers # # # USB Serial Converter support # CONFIG_USB_SERIAL=3Dm CONFIG_USB_SERIAL_GENERIC=3Dy CONFIG_USB_SERIAL_AIRCABLE=3Dm CONFIG_USB_SERIAL_AIRPRIME=3Dm CONFIG_USB_SERIAL_ARK3116=3Dm CONFIG_USB_SERIAL_BELKIN=3Dm CONFIG_USB_SERIAL_CH341=3Dm CONFIG_USB_SERIAL_WHITEHEAT=3Dm CONFIG_USB_SERIAL_DIGI_ACCELEPORT=3Dm CONFIG_USB_SERIAL_CP2101=3Dm CONFIG_USB_SERIAL_CYPRESS_M8=3Dm CONFIG_USB_SERIAL_EMPEG=3Dm CONFIG_USB_SERIAL_FTDI_SIO=3Dm CONFIG_USB_SERIAL_FUNSOFT=3Dm CONFIG_USB_SERIAL_VISOR=3Dm CONFIG_USB_SERIAL_IPAQ=3Dm CONFIG_USB_SERIAL_IR=3Dm CONFIG_USB_SERIAL_EDGEPORT=3Dm CONFIG_USB_SERIAL_EDGEPORT_TI=3Dm CONFIG_USB_SERIAL_GARMIN=3Dm CONFIG_USB_SERIAL_IPW=3Dm CONFIG_USB_SERIAL_KEYSPAN_PDA=3Dm CONFIG_USB_SERIAL_KEYSPAN=3Dm # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set # CONFIG_USB_SERIAL_KLSI is not set CONFIG_USB_SERIAL_KOBIL_SCT=3Dm CONFIG_USB_SERIAL_MCT_U232=3Dm CONFIG_USB_SERIAL_MOS7720=3Dm CONFIG_USB_SERIAL_MOS7840=3Dm CONFIG_USB_SERIAL_NAVMAN=3Dm CONFIG_USB_SERIAL_PL2303=3Dm CONFIG_USB_SERIAL_OTI6858=3Dm CONFIG_USB_SERIAL_HP4X=3Dm CONFIG_USB_SERIAL_SAFE=3Dm CONFIG_USB_SERIAL_SAFE_PADDED=3Dy CONFIG_USB_SERIAL_SIERRAWIRELESS=3Dm CONFIG_USB_SERIAL_TI=3Dm CONFIG_USB_SERIAL_CYBERJACK=3Dm CONFIG_USB_SERIAL_XIRCOM=3Dm CONFIG_USB_SERIAL_OPTION=3Dm CONFIG_USB_SERIAL_OMNINET=3Dm # CONFIG_USB_SERIAL_DEBUG is not set CONFIG_USB_EZUSB=3Dy # # USB Miscellaneous drivers # CONFIG_USB_EMI62=3Dm CONFIG_USB_EMI26=3Dm CONFIG_USB_ADUTUX=3Dm CONFIG_USB_AUERSWALD=3Dm CONFIG_USB_RIO500=3Dm CONFIG_USB_LEGOTOWER=3Dm CONFIG_USB_LCD=3Dm CONFIG_USB_BERRY_CHARGE=3Dm CONFIG_USB_LED=3Dm CONFIG_USB_CYPRESS_CY7C63=3Dm CONFIG_USB_CYTHERM=3Dm CONFIG_USB_PHIDGET=3Dm CONFIG_USB_PHIDGETKIT=3Dm CONFIG_USB_PHIDGETMOTORCONTROL=3Dm CONFIG_USB_PHIDGETSERVO=3Dm CONFIG_USB_IDMOUSE=3Dm CONFIG_USB_FTDI_ELAN=3Dm # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set CONFIG_USB_LD=3Dm # CONFIG_USB_TRANCEVIBRATOR is not set CONFIG_USB_IOWARRIOR=3Dm CONFIG_USB_TEST=3Dm CONFIG_USB_GOTEMP=3Dm # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set CONFIG_MMC=3Dm CONFIG_MMC_DEBUG=3Dy # CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_PASSWORDS is not set # # MMC/SD Card Drivers # CONFIG_MMC_BLOCK=3Dm CONFIG_MMC_BLOCK_BOUNCE=3Dy # CONFIG_SDIO_UART is not set # # MMC/SD Host Controller Drivers # CONFIG_MMC_SDHCI=3Dm # CONFIG_MMC_WBSD is not set CONFIG_MMC_TIFM_SD=3Dm # CONFIG_MMC_SPI is not set CONFIG_NEW_LEDS=3Dy CONFIG_LEDS_CLASS=3Dy # # LED drivers # # # LED Triggers # CONFIG_LEDS_TRIGGERS=3Dy CONFIG_LEDS_TRIGGER_TIMER=3Dy CONFIG_LEDS_TRIGGER_HEARTBEAT=3Dy # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_VIRTUALIZATION is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=3Dy # # File systems # CONFIG_EXT2_FS=3Dm CONFIG_EXT2_FS_XATTR=3Dy CONFIG_EXT2_FS_POSIX_ACL=3Dy CONFIG_EXT2_FS_SECURITY=3Dy # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=3Dm CONFIG_EXT3_FS_XATTR=3Dy CONFIG_EXT3_FS_POSIX_ACL=3Dy CONFIG_EXT3_FS_SECURITY=3Dy CONFIG_EXT4DEV_FS=3Dm CONFIG_EXT4DEV_FS_XATTR=3Dy CONFIG_EXT4DEV_FS_POSIX_ACL=3Dy CONFIG_EXT4DEV_FS_SECURITY=3Dy CONFIG_JBD=3Dm # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=3Dm # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=3Dm CONFIG_REISER4_FS=3Dy # CONFIG_REISER4_DEBUG is not set CONFIG_REISERFS_FS=3Dy # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=3Dy CONFIG_REISERFS_FS_XATTR=3Dy CONFIG_REISERFS_FS_POSIX_ACL=3Dy CONFIG_REISERFS_FS_SECURITY=3Dy # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=3Dy CONFIG_XFS_FS=3Dm CONFIG_XFS_QUOTA=3Dy CONFIG_XFS_SECURITY=3Dy CONFIG_XFS_POSIX_ACL=3Dy CONFIG_XFS_RT=3Dy # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=3Dy CONFIG_INOTIFY_USER=3Dy # CONFIG_QUOTA is not set CONFIG_QUOTACTL=3Dy CONFIG_DNOTIFY=3Dy # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=3Dy CONFIG_FUSE_FS=3Dm # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=3Dm CONFIG_JOLIET=3Dy CONFIG_ZISOFS=3Dy CONFIG_UDF_FS=3Dm CONFIG_UDF_NLS=3Dy # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=3Dm CONFIG_MSDOS_FS=3Dm CONFIG_VFAT_FS=3Dm CONFIG_FAT_DEFAULT_CODEPAGE=3D437 CONFIG_FAT_DEFAULT_IOCHARSET=3D"iso8859-1" CONFIG_NTFS_FS=3Dm # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=3Dy CONFIG_PROC_KCORE=3Dy CONFIG_PROC_SYSCTL=3Dy CONFIG_SYSFS=3Dy CONFIG_TMPFS=3Dy # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=3Dy CONFIG_HUGETLB_PAGE=3Dy CONFIG_CONFIGFS_FS=3Dm # # Layered filesystems # # CONFIG_ECRYPT_FS is not set # CONFIG_UNION_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=3Dy CONFIG_NFS_FS=3Dy CONFIG_NFS_V3=3Dy # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=3Dy CONFIG_NFSD_V3=3Dy # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=3Dy CONFIG_LOCKD=3Dy CONFIG_LOCKD_V4=3Dy CONFIG_EXPORTFS=3Dy CONFIG_NFS_COMMON=3Dy CONFIG_SUNRPC=3Dy # CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=3Dm # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=3Dy CONFIG_NLS=3Dm CONFIG_NLS_DEFAULT=3D"iso8859-1" CONFIG_NLS_CODEPAGE_437=3Dm # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=3Dm # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=3Dm # CONFIG_DLM is not set # # Instrumentation Support # CONFIG_PROFILING=3Dy CONFIG_OPROFILE=3Dm CONFIG_KPROBES=3Dy # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=3Dy # CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=3Dy # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=3Dy # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=3Dy # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=3Dy CONFIG_SCHED_DEBUG=3Dy CONFIG_SCHEDSTATS=3Dy CONFIG_TIMER_STATS=3Dy CONFIG_SLUB_DEBUG_ON=3Dy CONFIG_DEBUG_RT_MUTEXES=3Dy CONFIG_DEBUG_PI_LIST=3Dy # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=3Dy CONFIG_DEBUG_MUTEXES=3Dy CONFIG_DEBUG_LOCK_ALLOC=3Dy CONFIG_PROVE_LOCKING=3Dy CONFIG_LOCKDEP=3Dy # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set CONFIG_TRACE_IRQFLAGS=3Dy CONFIG_DEBUG_SPINLOCK_SLEEP=3Dy CONFIG_DEBUG_LOCKING_API_SELFTESTS=3Dy CONFIG_STACKTRACE=3Dy # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=3Dy # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set # CONFIG_UNWIND_INFO is not set # CONFIG_PROFILE_LIKELY is not set # CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_DEBUG_SYNCHRO_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set # CONFIG_KGDB is not set # CONFIG_KGDB_ATTACH_WAIT is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # # Security options # CONFIG_KEYS=3Dy CONFIG_KEYS_DEBUG_PROC_KEYS=3Dy # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=3Dy CONFIG_CRYPTO_ALGAPI=3Dy CONFIG_CRYPTO_AEAD=3Dm CONFIG_CRYPTO_BLKCIPHER=3Dm CONFIG_CRYPTO_HASH=3Dy CONFIG_CRYPTO_MANAGER=3Dy CONFIG_CRYPTO_HMAC=3Dy CONFIG_CRYPTO_XCBC=3Dy CONFIG_CRYPTO_NULL=3Dm CONFIG_CRYPTO_MD4=3Dm CONFIG_CRYPTO_MD5=3Dm CONFIG_CRYPTO_SHA1=3Dm CONFIG_CRYPTO_SHA256=3Dm CONFIG_CRYPTO_SHA512=3Dm CONFIG_CRYPTO_WP512=3Dm CONFIG_CRYPTO_TGR192=3Dm CONFIG_CRYPTO_GF128MUL=3Dm CONFIG_CRYPTO_ECB=3Dm CONFIG_CRYPTO_CBC=3Dm CONFIG_CRYPTO_PCBC=3Dm CONFIG_CRYPTO_LRW=3Dm CONFIG_CRYPTO_XTS=3Dm # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=3Dm CONFIG_CRYPTO_FCRYPT=3Dm CONFIG_CRYPTO_BLOWFISH=3Dm CONFIG_CRYPTO_TWOFISH=3Dm CONFIG_CRYPTO_TWOFISH_COMMON=3Dm CONFIG_CRYPTO_TWOFISH_X86_64=3Dm CONFIG_CRYPTO_SERPENT=3Dm CONFIG_CRYPTO_AES=3Dm CONFIG_CRYPTO_AES_X86_64=3Dm CONFIG_CRYPTO_CAST5=3Dm CONFIG_CRYPTO_CAST6=3Dm CONFIG_CRYPTO_TEA=3Dm CONFIG_CRYPTO_ARC4=3Dm CONFIG_CRYPTO_KHAZAD=3Dm CONFIG_CRYPTO_ANUBIS=3Dm CONFIG_CRYPTO_SEED=3Dm CONFIG_CRYPTO_DEFLATE=3Dm CONFIG_CRYPTO_MICHAEL_MIC=3Dm CONFIG_CRYPTO_CRC32C=3Dm CONFIG_CRYPTO_CAMELLIA=3Dm # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_AUTHENC=3Dm # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=3Dy CONFIG_CRC_CCITT=3Dm CONFIG_CRC16=3Dm # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=3Dy # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=3Dm CONFIG_ZLIB_INFLATE=3Dy CONFIG_ZLIB_DEFLATE=3Dy CONFIG_LZO_COMPRESS=3Dy CONFIG_LZO_DECOMPRESS=3Dy CONFIG_PLIST=3Dy CONFIG_HAS_IOMEM=3Dy CONFIG_HAS_IOPORT=3Dy CONFIG_HAS_DMA=3Dy Here is dmesg: Linux version 2.6.23-rc8-mm2 (root@zephyr) (gcc version 4.2.0 (Gentoo 4.2.0= )) #4 SMP Thu Oct 4 20:45:26 MDT 2007 Command line: root=3D/dev/sda2 rootfstype=3Dreiser4 rootflags=3Dno_write_ba= rrier,tmgr.atom_max_size=3D8000 ro i8042.nomux elevator=3Dcfq resume=3D/dev= /sda3 panic=3D5 nmi_watchdog=3D0,panic debug kernelcore=3D384M BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data) BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 262000) 1 entries of 256 used end_pfn_map =3D 1048576 DMI present. ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) ACPI: RSDT 3FF7A87E, 0034 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 3FF7EE13, 0074 (r1 NVIDIA CK8 6040000 PTL_ F4240) ACPI: DSDT 3FF7A8B2, 4561 (r1 NVIDIA CK8 6040000 MSFT 100000E) ACPI: FACS 3FF7FFC0, 0040 ACPI: APIC 3FF7EE87, 005A (r1 NVIDIA NV_APIC_ 6040000 LTP 0) ACPI: BOOT 3FF7EEE1, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 3FF7EF09, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 262000) 1 entries of 256 used No mptable found. sizeof(struct page) =3D 88 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node Node 0: 99328 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262000 On node 0 totalpages: 261903 Node 0 memmap at 0xffff810001000000 size 23068672 first pfn 0xffff810001000= 000 DMA zone: 88 pages used for memmap DMA zone: 2648 pages reserved DMA zone: 1263 pages, LIFO batch:0 DMA32 zone: 2046 pages used for memmap DMA32 zone: 93186 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 3494 pages used for memmap Movable zone: 159178 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a000= 0 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d000= 0 swsusp: Registered nosave memory region: 00000000000d0000 - 000000000010000= 0 Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 34848 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253627 Kernel command line: root=3D/dev/sda2 rootfstype=3Dreiser4 rootflags=3Dno_w= rite_barrier,tmgr.atom_max_size=3D8000 ro i8042.nomux elevator=3Dcfq resume= =3D/dev/sda3 panic=3D5 nmi_watchdog=3D0,panic debug kernelcore=3D384M Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER time.c: Detected 797.941 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------= - | spin |wlock |rlock |mutex | wsem | rsem = | -------------------------------------------------------------------------= - A-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok = | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok = | double unlock: ok | ok | ok | ok | ok | ok = | initialize held: ok | ok | ok | ok | ok | ok = | bad unlock order: ok | ok | ok | ok | ok | ok = | -------------------------------------------------------------------------= - recursive read-lock: | ok | | ok = | recursive read-lock #2: | ok | | ok = | mixed read-write-lock: | ok | | ok = | mixed write-read-lock: | ok | | ok = | -------------------------------------------------------------------------= - hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A =3D> hirqs-on/12: ok | ok | ok | sirq-safe-A =3D> hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ e8000000 size 128 MB Memory: 1012496k/1048000k available (3332k kernel code, 34844k reserved, 15= 99k data, 1112k init) SLUB: Genslabs=3D11, HWalign=3D64, Order=3D0-3, MinObjects=3D16, CPUs=3D1, = Nodes=3D1 Calibrating delay using timer specific routine.. 1597.30 BogoMIPS (lpj=3D79= 8654) kswapd reclaim order set to 3 Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 26k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 650 Objects with 66 Devices 205 Methods 24 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquire= d evxfevnt-0091 [00] enable : Transition to ACPI mode successf= ul Using local APIC timer interrupts. APIC timer calibration result 12467832 Detected 12.467 MHz APIC timer. Brought up 1 CPUs net_namespace: 136 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on in= t 0x9 evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on in= t 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime = GPEs in this block evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime = GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:.....................= ............................................... Initialized 24/24 Regions 2/2 Fields 28/29 Buffers 14/21 Packages (662 node= s) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 70 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE =3D 0x21, I/O: command/status =3D 0x66, data =3D 0x62 ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Generic PHY: Registered new driver SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport PCI: Cannot allocate resource region 0 of device 0000:00:00.0 agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 128M @ 0xe8000000 Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 pnp: 00:01: ioport range 0x8000-0x807f has been reserved pnp: 00:01: ioport range 0x8080-0x80ff has been reserved pnp: 00:01: ioport range 0x8400-0x847f has been reserved pnp: 00:01: ioport range 0x8480-0x84ff has been reserved pnp: 00:01: ioport range 0x8800-0x887f has been reserved pnp: 00:01: ioport range 0x8880-0x88ff has been reserved pnp: 00:01: ioport range 0x2040-0x207f has been reserved pnp: 00:01: ioport range 0x2000-0x203f has been reserved pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:02: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:02: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:02: iomem range 0xfed00000-0xfed00fff has been reserved PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.0 PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.1 PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 50000000-53ffffff PCI: Bus 7, cardbus bridge: 0000:02:04.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: 54000000-57ffffff PCI: Bridge: 0000:00:0a.0 IO window: 3000-7fff MEM window: e0100000-e17fffff PREFETCH window: 50000000-57ffffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: e2000000-e2ffffff PREFETCH window: f0000000-f80fffff PCI: Setting latency timer of device 0000:00:0a.0 to 64 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -= > IRQ 19 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -= > IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 audit: initializing netlink socket (disabled) audit(1191556564.825:1): initialized Total HugeTLB memory allocated, 0 Loading Reiser4. See www.namesys.com for a description of Reiser4. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input1 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /devices/virtual/input/input2 ACPI: Lid Switch [LID] input: Video Bus as /devices/virtual/input/input3 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) Marking TSC unstable due to possible TSC halt in C2 Time: acpi_pm clocksource has been installed. ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [= 20070126] ACPI: Thermal Zone [THRM] (33 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 6= 0 seconds). Hangcheck: Using get_cycles(). loop: module loaded Marvell 88E1101: Registered new driver Marvell 88E1112: Registered new driver Marvell 88E1111: Registered new driver Marvell 88E1145: Registered new driver Davicom DM9161E: Registered new driver Davicom DM9161A: Registered new driver Davicom DM9131: Registered new driver Cicada Cis8204: Registered new driver Cicada Cis8201: Registered new driver LXT970: Registered new driver LXT971: Registered new driver QS6612: Registered new driver SMSC LAN83C185: Registered new driver Vitesse VSC8244: Registered new driver Broadcom BCM5411: Registered new driver Broadcom BCM5421: Registered new driver Broadcom BCM5461: Registered new driver ICPlus IP175C: Registered new driver 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -= > IRQ 18 eth0: RealTek RTL8139 at 0xffffc2000001c800, 00:0f:b0:07:dc:49, IRQ 18 eth0: Identified 8139 chip type 'RTL-8101' pata_amd 0000:00:08.0: version 0.3.9 PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15 ata1: ACPI get timing mode failed (AE 0x1001) ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48=20 ata1.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata2: ACPI get timing mode failed (AE 0x1001) ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.19, max MWDMA2 ata2.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA HTS721010G9AT00 MCZO PQ: 0 ANSI: = 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.19 PQ: 0 ANSI: = 5 sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 50000000-53ffffff MEM window: e0400000-e07fffff Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 Socket status: 30000086 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu co= res) (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 swsusp: Resume From Partition /dev/sda3 PM: Checking swsusp image. PM: Resume from disk failed. registered taskstats version 1 Freeing unused kernel memory: 1112k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input= /input4 reiser4: sda2: found disk format 4.0.0. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:06.0 to 64 ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 AC'97 0 analog subsections not ready input: PS/2 Mouse as /devices/virtual/input/input5 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/inp= ut6 intel8x0_measure_ac97_clock: measured 50370 usecs intel8x0: measured clock 635 rejected intel8x0: clocking to 48000 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -= > IRQ 21 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=3D1 cc=3D2 pcc=3D4 !pp= c ports=3D6 ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0=20 ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 par= k ehci_hcd 0000:00:02.2: park 0 ehci_hcd 0000:00:02.2: reset command 080b02 park=3D3 ithresh=3D8 period=3D1= 024 Reset HALT PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: supports USB remote wakeup ehci_hcd 0000:00:02.2: irq 21, io mem 0xe0004000 ehci_hcd 0000:00:02.2: reset command 080b02 park=3D3 ithresh=3D8 period=3D1= 024 Reset HALT ehci_hcd 0000:00:02.2: init command 010009 (park)=3D0 ithresh=3D1 period=3D= 256 RUN ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb1: new device found, idVendor=3D0000, idProduct=3D0000 usb usb1: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.23-rc8-mm2 ehci_hcd usb usb1: SerialNumber: 0000:00:02.2 hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 PCI: Enabling device 0000:00:02.0 (0004 -> 0006) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -= > IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller drivers/usb/core/inode.c: creating file '002' ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: USB HC TakeOver from BIOS/SMM ohci_hcd 0000:00:02.0: created debug files ohci_hcd 0000:00:02.0: irq 20, io mem 0xe0000000 ohci_hcd 0000:00:02.0: OHCI controller state ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=3Doperational CBSR=3D3 ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=3D0 ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH ohci_hcd 0000:00:02.0: hcca frame #0003 ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=3D1 NPS NDP=3D3(3) ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=3D0000 DR=3D0000 ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb2: new device found, idVendor=3D0000, idProduct=3D0000 usb usb2: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 PCI: Enabling device 0000:00:02.1 (0004 -> 0006) ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller drivers/usb/core/inode.c: creating file '003' ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: USB HC TakeOver from BIOS/SMM hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 ohci_hcd 0000:00:02.1: created debug files ohci_hcd 0000:00:02.1: irq 22, io mem 0xe0001000 ohci_hcd 0000:00:02.1: OHCI controller state ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=3Doperational CBSR=3D3 ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=3D0 ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH ohci_hcd 0000:00:02.1: hcca frame #0003 ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=3D1 NPS NDP=3D3(3) ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=3D0000 DR=3D0000 ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: global over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists hub 3-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb3: new device found, idVendor=3D0000, idProduct=3D0000 usb usb3: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd usb usb3: SerialNumber: 0000:00:02.1 hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -= > IRQ 17 ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor 0x4243) ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00, vendor 0x4243) ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x02, vendor 0x4243) ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) ssb: Core 4 found: PCI (cc 0x804, rev 0x03, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 ohci_hcd 0000:00:02.0: auto-stop root hub ohci_hcd 0000:00:02.1: auto-stop root hub hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:02.2: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ohci_hcd 0000:00:02.0: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend ohci_hcd 0000:00:02.1: suspend root hub NET: Registered protocol family 10 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block= 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names Adding 2843496k swap on /dev/sda3. Priority:100 extents:1 across:2843496k =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D [ INFO: possible circular locking dependency detected ] 2.6.23-rc8-mm2 #4 ------------------------------------------------------- echo/4502 is trying to acquire lock: (pm_mutex){--..}, at: [] hibernate+0x12/0x1f0 but task is already holding lock: (&buffer->mutex){--..}, at: [] sysfs_write_file+0x48/0x1= 60 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&buffer->mutex){--..}: [] __lock_acquire+0xc8b/0x1180 [] lock_acquire+0x53/0x70 [] sysfs_read_file+0x46/0x150 [] __mutex_lock_slowpath+0x80/0x2c0 [] sysfs_read_file+0x46/0x150 [] vfs_read+0xc5/0x180 [] sys_read+0x53/0x90 [] try_name+0x75/0x210 [] sys_mount+0xce/0x100 [] __mutex_lock_slowpath+0x18b/0x2c0 [] name_to_dev_t+0x24d/0x2a0 [] trace_hardirqs_on+0xc1/0x160 [] software_resume+0x38/0x1a0 [] kernel_init+0x15b/0x340 [] trace_hardirqs_on_thunk+0x35/0x37 [] trace_hardirqs_on+0xc1/0x160 [] child_rip+0xa/0x12 [] restore_args+0x0/0x30 [] vgacon_cursor+0x0/0x1f0 [] release_console_sem+0x4b/0x230 [] kernel_init+0x0/0x340 [] child_rip+0x0/0x12 [] 0xffffffffffffffff -> #0 (pm_mutex){--..}: [] print_circular_bug_header+0xe8/0xf0 [] __lock_acquire+0xac0/0x1180 [] lock_acquire+0x53/0x70 [] hibernate+0x12/0x1f0 [] __mutex_lock_slowpath+0x80/0x2c0 [] hibernate+0x12/0x1f0 [] state_store+0xe0/0xf0 [] sysfs_write_file+0xfe/0x160 [] vfs_write+0xc8/0x180 [] sys_write+0x53/0x90 [] system_call+0x7e/0x83 [] 0xffffffffffffffff other info that might help us debug this: 1 lock held by echo/4502: #0: (&buffer->mutex){--..}, at: [] sysfs_write_file+0x4= 8/0x160 stack backtrace: Call Trace: [] print_circular_bug_tail+0x83/0x90 [] print_circular_bug_header+0xe8/0xf0 [] __lock_acquire+0xac0/0x1180 [] lock_acquire+0x53/0x70 [] hibernate+0x12/0x1f0 [] __mutex_lock_slowpath+0x80/0x2c0 [] hibernate+0x12/0x1f0 [] state_store+0xe0/0xf0 [] sysfs_write_file+0xfe/0x160 [] vfs_write+0xc8/0x180 [] sys_write+0x53/0x90 [] system_call+0x7e/0x83 INFO: lockdep is turned off. swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Shrinking memory... =08-=08done (0 pages freed) Freed 0 kbytes in 0.07 seconds (0.00 MB/s) Suspending console(s) Suspending device vcsa1 Suspending device vcs1 Suspending device event6 Suspending device event5 Suspending device event4 Suspending device event3 Suspending device event2 Suspending device event1 Suspending device event0 Suspending device ssb0:2 Suspending device ssb0:1 Suspending device ssb0:0 Suspending device usbdev3.1_ep81 Suspending device 3-0:1.0 Suspending device usbdev3.1_ep00 Suspending device usb3 Suspending device usbdev2.1_ep81 Suspending device 2-0:1.0 Suspending device usbdev2.1_ep00 Suspending device usb2 Suspending device usbdev1.1_ep81 Suspending device 1-0:1.0 Suspending device usbdev1.1_ep00 Suspending device usb1 Suspending device controlC0 Suspending device 0-0:AD1981B Suspending device pcmC0D0c Suspending device pcmC0D0p Suspending device pcmC0D1c Suspending device pcmC0D2p Suspending device card0 Suspending device mouse1 Suspending device input6 Suspending device mouse0 Suspending device input5 Suspending device timer Suspending device input4 Suspending device serio1 Suspending device psaux Suspending device serio0 Suspending device mice Suspending device i8042 Suspending device pcmcia_socket1 Suspending device pcmcia_socket0 Suspending device 1:0:0:0 Suspending device target1:0:0 Suspending device 0:0:0:0 sd 0:0:0:0: [sda] Synchronizing SCSI cache Suspending device target0:0:0 Suspending device host1 Suspending device host0 Suspending device eth0 Suspending device hpet Suspending device rtc Suspending device tty63 Suspending device tty62 Suspending device tty61 Suspending device tty60 Suspending device tty59 Suspending device tty58 Suspending device tty57 Suspending device tty56 Suspending device tty55 Suspending device tty54 Suspending device tty53 Suspending device tty52 Suspending device tty51 Suspending device tty50 Suspending device tty49 Suspending device tty48 Suspending device tty47 Suspending device tty46 Suspending device tty45 Suspending device tty44 Suspending device tty43 Suspending device tty42 Suspending device tty41 Suspending device tty40 Suspending device tty39 Suspending device tty38 Suspending device tty37 Suspending device tty36 Suspending device tty35 Suspending device tty34 Suspending device tty33 Suspending device tty32 Suspending device tty31 Suspending device tty30 Suspending device tty29 Suspending device tty28 Suspending device tty27 Suspending device tty26 Suspending device tty25 Suspending device tty24 Suspending device tty23 Suspending device tty22 Suspending device tty21 Suspending device tty20 Suspending device tty19 Suspending device tty18 Suspending device tty17 Suspending device tty16 Suspending device tty15 Suspending device tty14 Suspending device tty13 Suspending device tty12 Suspending device tty11 Suspending device tty10 Suspending device tty9 Suspending device tty8 Suspending device tty7 Suspending device tty6 Suspending device tty5 Suspending device tty4 Suspending device tty3 Suspending device tty2 Suspending device tty1 Suspending device vcsa Suspending device vcs Suspending device tty0 Suspending device ptmx Suspending device console Suspending device tty Suspending device input3 Suspending device acpi_video2 Suspending device acpi_video1 Suspending device acpi_video0 Suspending device input2 Suspending device input1 Suspending device input0 Suspending device BAT1 Suspending device ACAD Suspending device snapshot Suspending device pcspkr Suspending device cpu0 Suspending device msr0 Suspending device mcelog Suspending device lo Suspending device kmsg Suspending device urandom Suspending device random Suspending device full Suspending device zero Suspending device port Suspending device null Suspending device kmem Suspending device mem Suspending device agpgart Suspending device 00:0b Suspending device 00:0a Suspending device 00:09 Suspending device 00:08 Suspending device 00:07 Suspending device 00:06 Suspending device 00:05 Suspending device 00:04 Suspending device 00:03 Suspending device 00:02 Suspending device 00:01 Suspending device 00:00 Suspending device pnp0 Suspending device 0000:01:00.0 Suspending device 0000:02:04.2 Suspending device 0000:02:04.1 Suspending device 0000:02:04.0 Suspending device 0000:02:02.0 ACPI: PCI interrupt for device 0000:02:02.0 disabled Suspending device 0000:02:01.0 Suspending device 0000:02:00.0 Suspending device 0000:00:18.3 Suspending device 0000:00:18.2 Suspending device 0000:00:18.1 Suspending device 0000:00:18.0 Suspending device 0000:00:0b.0 Suspending device 0000:00:0a.0 Suspending device 0000:00:08.0 Suspending device 0000:00:06.1 Suspending device 0000:00:06.0 codec_write 0: semaphore is not ready for register 0x26 codec_write 0: semaphore is not ready for register 0x26 ACPI: PCI interrupt for device 0000:00:06.0 disabled Suspending device 0000:00:02.2 ACPI: PCI interrupt for device 0000:00:02.2 disabled ehci_hcd 0000:00:02.2: --> PCI D3/wakeup Suspending device 0000:00:02.1 ACPI: PCI interrupt for device 0000:00:02.1 disabled ohci_hcd 0000:00:02.1: --> PCI D3/wakeup Suspending device 0000:00:02.0 ACPI: PCI interrupt for device 0000:00:02.0 disabled ohci_hcd 0000:00:02.0: --> PCI D3/wakeup Suspending device 0000:00:01.1 Suspending device 0000:00:01.0 Suspending device 0000:00:00.0 Suspending device pci0000:00 Suspending device LNXTHERM:01 Suspending device LNXTHERM:00 Suspending device PNP0C0F:0d Suspending device PNP0C0F:0c Suspending device PNP0C0F:0b Suspending device PNP0C0F:0a Suspending device PNP0C0F:09 Suspending device PNP0C0F:08 Suspending device PNP0C0F:07 Suspending device PNP0C0F:06 Suspending device PNP0C0F:05 Suspending device PNP0C0F:04 Suspending device PNP0C0F:03 Suspending device PNP0C0F:02 Suspending device PNP0C0F:01 Suspending device PNP0C0F:00 Suspending device device:1b Suspending device device:1a Suspending device device:19 Suspending device LNXVIDEO:00 Suspending device device:18 Suspending device device:17 Suspending device device:16 Suspending device PNP0401:00 Suspending device PNP0700:00 Suspending device PNP0A05:00 Suspending device PNP0F13:00 Suspending device PNP0303:00 Suspending device PNP0C04:00 Suspending device PNP0B00:00 Suspending device PNP0800:00 Suspending device PNP0200:00 Suspending device PNP0100:00 Suspending device PNP0000:00 Suspending device PNP0C02:01 Suspending device PNP0C0A:00 Suspending device PNP0C09:00 Suspending device PNP0C01:00 Suspending device PNP0C02:00 Suspending device ACPI0003:00 Suspending device device:15 Suspending device device:14 Suspending device device:13 Suspending device device:12 Suspending device device:11 Suspending device device:10 Suspending device device:0f Suspending device device:0e Suspending device device:0d Suspending device device:0c Suspending device device:0b Suspending device device:0a Suspending device device:09 Suspending device device:08 Suspending device device:07 Suspending device device:06 Suspending device device:05 Suspending device device:04 Suspending device device:03 Suspending device device:02 Suspending device device:01 Suspending device PNP0A03:00 Suspending device PNP0C0D:00 Suspending device PNP0C0C:00 Suspending device pnp0c14:00 Suspending device device:00 Suspending device ACPI0007:00 Suspending device LNXPWRBN:00 Suspending device LNXSYSTM:00 Suspending device id Suspending device vtcon0 Suspending device platform Disabling non-boot CPUs ... swsusp: critical section:=20 swsusp: Need to copy 22901 pages swsusp: Normal pages needed: 22901 + 1024 + 24, available pages: 238995 evxfevnt-0079 [00] enable : System is already in ACPI mode agpgart: Setting up Nforce3 AGP. ohci_hcd 0000:00:02.0: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -= > IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b0000= 7, writing b00006) ohci_hcd 0000:00:02.1: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 PM: Writing back config space on device 0000:00:02.1 at offset 1 (was b0000= 7, writing b00006) ehci_hcd 0000:00:02.2: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -= > IRQ 21 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: lost power, restarting usb usb1: root hub lost power or was reset ehci_hcd 0000:00:02.2: reset command 080b02 park=3D3 ithresh=3D8 period=3D1= 024 Reset HALT PCI: cache line size of 64 is not supported by device 0000:00:02.2 PM: Writing back config space on device 0000:00:06.0 at offset 1 (was b0000= 7, writing b00003) ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:06.0 to 64 PM: Writing back config space on device 0000:00:08.0 at offset 1 (was b0000= 1, writing b00005) PCI: Setting latency timer of device 0000:00:08.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -= > IRQ 17 ata1: ACPI get timing mode failed (AE 0x1001) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA pnp: Failed to activate device 00:08. pnp: Failed to activate device 00:09. sd 0:0:0:0: [sda] Starting disk ata2: ACPI get timing mode failed (AE 0x1001) ata2.00: configured for MWDMA2 usb usb1: usb resume ehci_hcd 0000:00:02.2: resume root hub after power loss hub 1-0:1.0: trying to enable port power on non-switchable hub usb usb2: usb resume ohci_hcd 0000:00:02.0: lost power ohci_hcd 0000:00:02.0: OHCI controller state ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=3Doperational CBSR=3D3 ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=3D0 ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH ohci_hcd 0000:00:02.0: hcca frame #0003 ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=3D1 NPS NDP=3D3(3) ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=3D0000 DR=3D0000 ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:02.0: restart complete usb usb2: root hub lost power or was reset hub 2-0:1.0: trying to enable port power on non-switchable hub usb usb3: usb resume ohci_hcd 0000:00:02.1: lost power ohci_hcd 0000:00:02.1: OHCI controller state ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=3Doperational CBSR=3D3 ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=3D0 ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH ohci_hcd 0000:00:02.1: hcca frame #0003 ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=3D1 NPS NDP=3D3(3) ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=3D0000 DR=3D0000 ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:02.1: restart complete usb usb3: root hub lost power or was reset hub 3-0:1.0: trying to enable port power on non-switchable hub PM: Image restored successfully. Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 done. swsusp: Basic memory bitmaps freed ohci_hcd 0000:00:02.0: auto-stop root hub ohci_hcd 0000:00:02.1: auto-stop root hub hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:02.2: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ohci_hcd 0000:00:02.0: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend ohci_hcd 0000:00:02.1: suspend root hub eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 netconsole: Unknown symbol config_group_init netconsole: Unknown symbol config_item_get netconsole: Unknown symbol configfs_unregister_subsystem netconsole: Unknown symbol configfs_register_subsystem netconsole: Unknown symbol config_item_init_type_name netconsole: Unknown symbol config_item_put ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A Hangcheck: hangcheck value past margin! usb usb1: usb resume ehci_hcd 0000:00:02.2: resume root hub hub 1-0:1.0: hub_resume hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=3Dj CSC CON= NECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:02.2: port 1 high speed ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=3Dse0 PE CO= NNECT usb 1-1: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:02.2: port 1 high speed ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=3Dse0 PE CO= NNECT usb 1-1: default language 0x0409 usb 1-1: uevent usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: uevent usb 1-1:1.0: uevent drivers/usb/core/inode.c: creating file '002' usb 1-1: new device found, idVendor=3D0bc2, idProduct=3D0502 usb 1-1: new device strings: Mfr=3D5, Product=3D2, SerialNumber=3D1 usb 1-1: Product: ST94811U2-RK usb 1-1: Manufacturer: Seagate usb 1-1: SerialNumber: 33504D304C573434 libusual 1-1:1.0: usb_probe_interface libusual 1-1:1.0: usb_probe_interface - got id usbcore: registered new interface driver libusual Initializing USB Mass Storage driver... usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 2:0:0:0: Direct-Access ST350064 1A 3.AA PQ: 0 ANSI: = 0 sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg2 type 0 ReiserFS: sdb1: found reiserfs format "3.6" with standard journal ReiserFS: sdb1: using ordered data mode ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block= 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb1: checking transaction log (sdb1) ReiserFS: sdb1: Using r5 hash to sort names Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! vbetool[54306]: segfault at 000000000000548f rip 0000000000425ba7 rsp 00007= fff8b1a95f0 error 4 Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) Suspending device 2:0:0:0 Suspending device target2:0:0 Suspending device host2 Suspending device usbdev1.2_ep82 Suspending device usbdev1.2_ep01 Suspending device 1-1:1.0 Suspending device usbdev1.2_ep00 Suspending device 1-1 usb 1-1: usb suspend Suspending device vcsa6 Suspending device vcs6 Suspending device vcsa4 Suspending device vcsa2 Suspending device vcs2 Suspending device vcsa5 Suspending device vcs5 Suspending device vcsa3 Suspending device vcs3 Suspending device vcs4 Suspending device vcsa7 Suspending device vcs7 Suspending device audio Suspending device dsp Suspending device adsp Suspending device mixer Suspending device vcsa1 Suspending device vcs1 Suspending device event6 Suspending device event5 Suspending device event4 Suspending device event3 Suspending device event2 Suspending device event1 Suspending device event0 Suspending device ssb0:2 Suspending device ssb0:1 Suspending device ssb0:0 Suspending device usbdev3.1_ep81 Suspending device 3-0:1.0 Suspending device usbdev3.1_ep00 Suspending device usb3 Suspending device usbdev2.1_ep81 Suspending device 2-0:1.0 Suspending device usbdev2.1_ep00 Suspending device usb2 Suspending device usbdev1.1_ep81 Suspending device 1-0:1.0 Suspending device usbdev1.1_ep00 Suspending device usb1 hub 1-0:1.0: hub_suspend usb usb1: bus suspend ehci_hcd 0000:00:02.2: suspend root hub Suspending device controlC0 Suspending device 0-0:AD1981B Suspending device pcmC0D0c Suspending device pcmC0D0p Suspending device pcmC0D1c Suspending device pcmC0D2p Suspending device card0 Suspending device mouse1 Suspending device input6 Suspending device mouse0 Suspending device input5 Suspending device timer Suspending device input4 Suspending device serio1 Suspending device psaux Suspending device serio0 Suspending device mice Suspending device i8042 Suspending device pcmcia_socket1 Suspending device pcmcia_socket0 Suspending device 1:0:0:0 Suspending device target1:0:0 Suspending device 0:0:0:0 sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk Suspending device target0:0:0 Suspending device host1 Suspending device host0 Suspending device eth0 Suspending device hpet Suspending device rtc Suspending device tty63 Suspending device tty62 Suspending device tty61 Suspending device tty60 Suspending device tty59 Suspending device tty58 Suspending device tty57 Suspending device tty56 Suspending device tty55 Suspending device tty54 Suspending device tty53 Suspending device tty52 Suspending device tty51 Suspending device tty50 Suspending device tty49 Suspending device tty48 Suspending device tty47 Suspending device tty46 Suspending device tty45 Suspending device tty44 Suspending device tty43 Suspending device tty42 Suspending device tty41 Suspending device tty40 Suspending device tty39 Suspending device tty38 Suspending device tty37 Suspending device tty36 Suspending device tty35 Suspending device tty34 Suspending device tty33 Suspending device tty32 Suspending device tty31 Suspending device tty30 Suspending device tty29 Suspending device tty28 Suspending device tty27 Suspending device tty26 Suspending device tty25 Suspending device tty24 Suspending device tty23 Suspending device tty22 Suspending device tty21 Suspending device tty20 Suspending device tty19 Suspending device tty18 Suspending device tty17 Suspending device tty16 Suspending device tty15 Suspending device tty14 Suspending device tty13 Suspending device tty12 Suspending device tty11 Suspending device tty10 Suspending device tty9 Suspending device tty8 Suspending device tty7 Suspending device tty6 Suspending device tty5 Suspending device tty4 Suspending device tty3 Suspending device tty2 Suspending device tty1 Suspending device vcsa Suspending device vcs Suspending device tty0 Suspending device ptmx Suspending device console Suspending device tty Suspending device input3 Suspending device acpi_video2 Suspending device acpi_video1 Suspending device acpi_video0 Suspending device input2 Suspending device input1 Suspending device input0 Suspending device BAT1 Suspending device ACAD Suspending device snapshot Suspending device pcspkr Suspending device cpu0 Suspending device msr0 Suspending device mcelog Suspending device lo Suspending device kmsg Suspending device urandom Suspending device random Suspending device full Suspending device zero Suspending device port Suspending device null Suspending device kmem Suspending device mem Suspending device agpgart Suspending device 00:0b Suspending device 00:0a Suspending device 00:09 Suspending device 00:08 Suspending device 00:07 Suspending device 00:06 Suspending device 00:05 Suspending device 00:04 Suspending device 00:03 Suspending device 00:02 Suspending device 00:01 Suspending device 00:00 Suspending device pnp0 Suspending device 0000:01:00.0 Suspending device 0000:02:04.2 Suspending device 0000:02:04.1 Suspending device 0000:02:04.0 Suspending device 0000:02:02.0 ACPI: PCI interrupt for device 0000:02:02.0 disabled Suspending device 0000:02:01.0 Suspending device 0000:02:00.0 Suspending device 0000:00:18.3 Suspending device 0000:00:18.2 Suspending device 0000:00:18.1 Suspending device 0000:00:18.0 Suspending device 0000:00:0b.0 Suspending device 0000:00:0a.0 Suspending device 0000:00:08.0 Suspending device 0000:00:06.1 Suspending device 0000:00:06.0 codec_write 0: semaphore is not ready for register 0x26 codec_write 0: semaphore is not ready for register 0x26 ACPI: PCI interrupt for device 0000:00:06.0 disabled Suspending device 0000:00:02.2 ACPI: PCI interrupt for device 0000:00:02.2 disabled ehci_hcd 0000:00:02.2: --> PCI D3/wakeup Suspending device 0000:00:02.1 ACPI: PCI interrupt for device 0000:00:02.1 disabled ohci_hcd 0000:00:02.1: --> PCI D3/wakeup Suspending device 0000:00:02.0 ACPI: PCI interrupt for device 0000:00:02.0 disabled ohci_hcd 0000:00:02.0: --> PCI D3/wakeup Suspending device 0000:00:01.1 Suspending device 0000:00:01.0 Suspending device 0000:00:00.0 Suspending device pci0000:00 Suspending device LNXTHERM:01 Suspending device LNXTHERM:00 Suspending device PNP0C0F:0d Suspending device PNP0C0F:0c Suspending device PNP0C0F:0b Suspending device PNP0C0F:0a Suspending device PNP0C0F:09 Suspending device PNP0C0F:08 Suspending device PNP0C0F:07 Suspending device PNP0C0F:06 Suspending device PNP0C0F:05 Suspending device PNP0C0F:04 Suspending device PNP0C0F:03 Suspending device PNP0C0F:02 Suspending device PNP0C0F:01 Suspending device PNP0C0F:00 Suspending device device:1b Suspending device device:1a Suspending device device:19 Suspending device LNXVIDEO:00 Suspending device device:18 Suspending device device:17 Suspending device device:16 Suspending device PNP0401:00 Suspending device PNP0700:00 Suspending device PNP0A05:00 Suspending device PNP0F13:00 Suspending device PNP0303:00 Suspending device PNP0C04:00 Suspending device PNP0B00:00 Suspending device PNP0800:00 Suspending device PNP0200:00 Suspending device PNP0100:00 Suspending device PNP0000:00 Suspending device PNP0C02:01 Suspending device PNP0C0A:00 Suspending device PNP0C09:00 Suspending device PNP0C01:00 Suspending device PNP0C02:00 Suspending device ACPI0003:00 Suspending device device:15 Suspending device device:14 Suspending device device:13 Suspending device device:12 Suspending device device:11 Suspending device device:10 Suspending device device:0f Suspending device device:0e Suspending device device:0d Suspending device device:0c Suspending device device:0b Suspending device device:0a Suspending device device:09 Suspending device device:08 Suspending device device:07 Suspending device device:06 Suspending device device:05 Suspending device device:04 Suspending device device:03 Suspending device device:02 Suspending device device:01 Suspending device PNP0A03:00 Suspending device PNP0C0D:00 Suspending device PNP0C0C:00 Suspending device pnp0c14:00 Suspending device device:00 Suspending device ACPI0007:00 Suspending device LNXPWRBN:00 Suspending device LNXSYSTM:00 Suspending device id Suspending device vtcon0 Suspending device platform Disabling non-boot CPUs ... hwsleep-0318 [00] enter_sleep_state : Entering sleep state [S3] Back to C! WARNING: at arch/x86_64/kernel/smp.c:427 smp_call_function_single() Call Trace: [] smp_call_function_single+0xc7/0xd0 [] sc_freq_event+0x87/0x90 [] notifier_call_chain+0x51/0x70 [] __srcu_notifier_call_chain+0x5d/0x90 [] cpufreq_resume+0x109/0x110 [] __sysdev_resume+0x33/0x50 [] sysdev_resume+0x58/0x90 [] device_power_up+0x9/0x20 [] suspend_devices_and_enter+0xed/0x100 [] enter_state+0x198/0x1d0 [] state_store+0xba/0xf0 [] sysfs_write_file+0xfe/0x160 [] vfs_write+0xc8/0x180 [] sys_write+0x53/0x90 [] system_call+0x7e/0x83 INFO: lockdep is turned off. agpgart: Setting up Nforce3 AGP. ohci_hcd 0000:00:02.0: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -= > IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b0000= 7, writing b00006) ohci_hcd 0000:00:02.1: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 PM: Writing back config space on device 0000:00:02.1 at offset 1 (was b0000= 7, writing b00006) ehci_hcd 0000:00:02.2: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -= > IRQ 21 PCI: Setting latency timer of device 0000:00:02.2 to 64 PM: Writing back config space on device 0000:00:06.0 at offset 1 (was b0000= 7, writing b00003) ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:06.0 to 64 PM: Writing back config space on device 0000:00:08.0 at offset b (was c8010= de, writing c80f0de) PCI: Setting latency timer of device 0000:00:08.0 to 64 PM: Writing back config space on device 0000:00:0a.0 at offset 9 (was fff0,= writing 57f05000) PM: Writing back config space on device 0000:00:0a.0 at offset 6 (was 80020= 200, writing 800a0200) PCI: Setting latency timer of device 0000:00:0a.0 to 64 PM: Writing back config space on device 0000:00:0b.0 at offset 7 (was 22000= f0, writing 222000f0) PM: Writing back config space on device 0000:02:00.0 at offset f (was 40201= 00, writing 402010b) PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 0, wr= iting e0100000) PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, wr= iting e0108000) PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, wr= iting 4010) PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 21000= 00, writing 2100116) PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, wr= iting e0108800) PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 1, wr= iting 7001) PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, wr= iting 4000) PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 29000= 00, writing 2900107) eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 PCI: Enabling device 0000:02:02.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -= > IRQ 17 PM: Writing back config space on device 0000:02:02.0 at offset f (was 100, = writing 10b) PM: Writing back config space on device 0000:02:02.0 at offset 4 (was 0, wr= iting e0104000) PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, wr= iting 4000) PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2, wr= iting 106) PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001= ff, writing 5c0010b) PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, wr= iting 34fc) PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, wr= iting 3400) PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, wr= iting 30fc) PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, wr= iting 3000) PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, wr= iting e07ff000) PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, wr= iting e0400000) PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, wr= iting 53fff000) PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, wr= iting 50000000) PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 40000= 000, writing b0060302) PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 82400= 8, writing 82a810) PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 21001= 07, writing 2100007) PM: Writing back config space on device 0000:02:04.1 at offset f (was 34002= ff, writing 5c0020a) PM: Writing back config space on device 0000:02:04.1 at offset e (was 0, wr= iting 3cfc) PM: Writing back config space on device 0000:02:04.1 at offset d (was 0, wr= iting 3c00) PM: Writing back config space on device 0000:02:04.1 at offset c (was 0, wr= iting 38fc) PM: Writing back config space on device 0000:02:04.1 at offset b (was 0, wr= iting 3800) PM: Writing back config space on device 0000:02:04.1 at offset a (was 0, wr= iting e0fff000) PM: Writing back config space on device 0000:02:04.1 at offset 9 (was 0, wr= iting e0c00000) PM: Writing back config space on device 0000:02:04.1 at offset 8 (was 0, wr= iting 57fff000) PM: Writing back config space on device 0000:02:04.1 at offset 7 (was e1000= 000, writing 54000000) PM: Writing back config space on device 0000:02:04.1 at offset 6 (was 40000= 000, writing b00a0702) PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 82400= 8, writing 82a810) PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 21001= 03, writing 2100007) ata1: ACPI get timing mode failed (AE 0x1001) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 1, wr= iting 7401) PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 0, wr= iting 4010) PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 21000= 00, writing 2100107) PM: Writing back config space on device 0000:01:00.0 at offset f (was 10501= 00, writing 105010b) PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, wr= iting f8000008) PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, wr= iting f0000008) PM: Writing back config space on device 0000:01:00.0 at offset 4 (was 0, wr= iting e2000000) PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, wr= iting 4000) PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 2b000= 00, writing 2b00007) pnp: Failed to activate device 00:08. pnp: Failed to activate device 00:09. sd 0:0:0:0: [sda] Starting disk ata2: ACPI get timing mode failed (AE 0x1001) ata2.00: configured for MWDMA2 usb usb1: usb resume ehci_hcd 0000:00:02.2: resume root hub hub 1-0:1.0: hub_resume usb usb2: usb resume ohci_hcd 0000:00:02.0: resume root hub hub 2-0:1.0: hub_resume usb usb3: usb resume ohci_hcd 0000:00:02.1: resume root hub hub 3-0:1.0: hub_resume usb 1-1: usb resume ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=3Dse0 PE CO= NNECT usb 1-1: finish resume PM: Finishing wakeup. Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 done. ohci_hcd 0000:00:02.0: auto-stop root hub vbetool[54404]: segfault at 000000000000548f rip 0000000000425ba7 rsp 00007= fffe53dbbb0 error 4 ohci_hcd 0000:00:02.1: auto-stop root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ohci_hcd 0000:00:02.0: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend ohci_hcd 0000:00:02.1: suspend root hub Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! vbetool[56692]: segfault at 00000000000080a0 rip 0000000000425b1b rsp 00007= fff85079820 error 4 Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) Suspending device 2:0:0:0 Suspending device target2:0:0 Suspending device host2 Suspending device usbdev1.2_ep82 Suspending device usbdev1.2_ep01 Suspending device 1-1:1.0 Suspending device usbdev1.2_ep00 Suspending device 1-1 usb 1-1: usb suspend Suspending device vcsa6 Suspending device vcs6 Suspending device vcsa4 Suspending device vcsa2 Suspending device vcs2 Suspending device vcsa5 Suspending device vcs5 Suspending device vcsa3 Suspending device vcs3 Suspending device vcs4 Suspending device vcsa7 Suspending device vcs7 Suspending device audio Suspending device dsp Suspending device adsp Suspending device mixer Suspending device vcsa1 Suspending device vcs1 Suspending device event6 Suspending device event5 Suspending device event4 Suspending device event3 Suspending device event2 Suspending device event1 Suspending device event0 Suspending device ssb0:2 Suspending device ssb0:1 Suspending device ssb0:0 Suspending device usbdev3.1_ep81 Suspending device 3-0:1.0 Suspending device usbdev3.1_ep00 Suspending device usb3 Suspending device usbdev2.1_ep81 Suspending device 2-0:1.0 Suspending device usbdev2.1_ep00 Suspending device usb2 Suspending device usbdev1.1_ep81 Suspending device 1-0:1.0 Suspending device usbdev1.1_ep00 Suspending device usb1 hub 1-0:1.0: hub_suspend usb usb1: bus suspend ehci_hcd 0000:00:02.2: suspend root hub Suspending device controlC0 Suspending device 0-0:AD1981B Suspending device pcmC0D0c Suspending device pcmC0D0p Suspending device pcmC0D1c Suspending device pcmC0D2p Suspending device card0 Suspending device mouse1 Suspending device input6 Suspending device mouse0 Suspending device input5 Suspending device timer Suspending device input4 Suspending device serio1 Suspending device psaux Suspending device serio0 Suspending device mice Suspending device i8042 Suspending device pcmcia_socket1 Suspending device pcmcia_socket0 Suspending device 1:0:0:0 Suspending device target1:0:0 Suspending device 0:0:0:0 sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk Suspending device target0:0:0 Suspending device host1 Suspending device host0 Suspending device eth0 Suspending device hpet Suspending device rtc Suspending device tty63 Suspending device tty62 Suspending device tty61 Suspending device tty60 Suspending device tty59 Suspending device tty58 Suspending device tty57 Suspending device tty56 Suspending device tty55 Suspending device tty54 Suspending device tty53 Suspending device tty52 Suspending device tty51 Suspending device tty50 Suspending device tty49 Suspending device tty48 Suspending device tty47 Suspending device tty46 Suspending device tty45 Suspending device tty44 Suspending device tty43 Suspending device tty42 Suspending device tty41 Suspending device tty40 Suspending device tty39 Suspending device tty38 Suspending device tty37 Suspending device tty36 Suspending device tty35 Suspending device tty34 Suspending device tty33 Suspending device tty32 Suspending device tty31 Suspending device tty30 Suspending device tty29 Suspending device tty28 Suspending device tty27 Suspending device tty26 Suspending device tty25 Suspending device tty24 Suspending device tty23 Suspending device tty22 Suspending device tty21 Suspending device tty20 Suspending device tty19 Suspending device tty18 Suspending device tty17 Suspending device tty16 Suspending device tty15 Suspending device tty14 Suspending device tty13 Suspending device tty12 Suspending device tty11 Suspending device tty10 Suspending device tty9 Suspending device tty8 Suspending device tty7 Suspending device tty6 Suspending device tty5 Suspending device tty4 Suspending device tty3 Suspending device tty2 Suspending device tty1 Suspending device vcsa Suspending device vcs Suspending device tty0 Suspending device ptmx Suspending device console Suspending device tty Suspending device input3 Suspending device acpi_video2 Suspending device acpi_video1 Suspending device acpi_video0 Suspending device input2 Suspending device input1 Suspending device input0 Suspending device BAT1 Suspending device ACAD Suspending device snapshot Suspending device pcspkr Suspending device cpu0 Suspending device msr0 Suspending device mcelog Suspending device lo Suspending device kmsg Suspending device urandom Suspending device random Suspending device full Suspending device zero Suspending device port Suspending device null Suspending device kmem Suspending device mem Suspending device agpgart Suspending device 00:0b Suspending device 00:0a Suspending device 00:09 Suspending device 00:08 Suspending device 00:07 Suspending device 00:06 Suspending device 00:05 Suspending device 00:04 Suspending device 00:03 Suspending device 00:02 Suspending device 00:01 Suspending device 00:00 Suspending device pnp0 Suspending device 0000:01:00.0 Suspending device 0000:02:04.2 Suspending device 0000:02:04.1 Suspending device 0000:02:04.0 Suspending device 0000:02:02.0 ACPI: PCI interrupt for device 0000:02:02.0 disabled Suspending device 0000:02:01.0 Suspending device 0000:02:00.0 Suspending device 0000:00:18.3 Suspending device 0000:00:18.2 Suspending device 0000:00:18.1 Suspending device 0000:00:18.0 Suspending device 0000:00:0b.0 Suspending device 0000:00:0a.0 Suspending device 0000:00:08.0 Suspending device 0000:00:06.1 Suspending device 0000:00:06.0 codec_write 0: semaphore is not ready for register 0x26 codec_write 0: semaphore is not ready for register 0x26 ACPI: PCI interrupt for device 0000:00:06.0 disabled Suspending device 0000:00:02.2 ACPI: PCI interrupt for device 0000:00:02.2 disabled ehci_hcd 0000:00:02.2: --> PCI D3/wakeup Suspending device 0000:00:02.1 ACPI: PCI interrupt for device 0000:00:02.1 disabled ohci_hcd 0000:00:02.1: --> PCI D3/wakeup Suspending device 0000:00:02.0 ACPI: PCI interrupt for device 0000:00:02.0 disabled ohci_hcd 0000:00:02.0: --> PCI D3/wakeup Suspending device 0000:00:01.1 Suspending device 0000:00:01.0 Suspending device 0000:00:00.0 Suspending device pci0000:00 Suspending device LNXTHERM:01 Suspending device LNXTHERM:00 Suspending device PNP0C0F:0d Suspending device PNP0C0F:0c Suspending device PNP0C0F:0b Suspending device PNP0C0F:0a Suspending device PNP0C0F:09 Suspending device PNP0C0F:08 Suspending device PNP0C0F:07 Suspending device PNP0C0F:06 Suspending device PNP0C0F:05 Suspending device PNP0C0F:04 Suspending device PNP0C0F:03 Suspending device PNP0C0F:02 Suspending device PNP0C0F:01 Suspending device PNP0C0F:00 Suspending device device:1b Suspending device device:1a Suspending device device:19 Suspending device LNXVIDEO:00 Suspending device device:18 Suspending device device:17 Suspending device device:16 Suspending device PNP0401:00 Suspending device PNP0700:00 Suspending device PNP0A05:00 Suspending device PNP0F13:00 Suspending device PNP0303:00 Suspending device PNP0C04:00 Suspending device PNP0B00:00 Suspending device PNP0800:00 Suspending device PNP0200:00 Suspending device PNP0100:00 Suspending device PNP0000:00 Suspending device PNP0C02:01 Suspending device PNP0C0A:00 Suspending device PNP0C09:00 Suspending device PNP0C01:00 Suspending device PNP0C02:00 Suspending device ACPI0003:00 Suspending device device:15 Suspending device device:14 Suspending device device:13 Suspending device device:12 Suspending device device:11 Suspending device device:10 Suspending device device:0f Suspending device device:0e Suspending device device:0d Suspending device device:0c Suspending device device:0b Suspending device device:0a Suspending device device:09 Suspending device device:08 Suspending device device:07 Suspending device device:06 Suspending device device:05 Suspending device device:04 Suspending device device:03 Suspending device device:02 Suspending device device:01 Suspending device PNP0A03:00 Suspending device PNP0C0D:00 Suspending device PNP0C0C:00 Suspending device pnp0c14:00 Suspending device device:00 Suspending device ACPI0007:00 Suspending device LNXPWRBN:00 Suspending device LNXSYSTM:00 Suspending device id Suspending device vtcon0 Suspending device platform Disabling non-boot CPUs ... hwsleep-0318 [00] enter_sleep_state : Entering sleep state [S3] Back to C! WARNING: at arch/x86_64/kernel/smp.c:427 smp_call_function_single() Call Trace: [] smp_call_function_single+0xc7/0xd0 [] sc_freq_event+0x87/0x90 [] notifier_call_chain+0x51/0x70 [] __srcu_notifier_call_chain+0x5d/0x90 [] cpufreq_resume+0x109/0x110 [] __sysdev_resume+0x33/0x50 [] sysdev_resume+0x58/0x90 [] device_power_up+0x9/0x20 [] suspend_devices_and_enter+0xed/0x100 [] enter_state+0x198/0x1d0 [] state_store+0xba/0xf0 [] sysfs_write_file+0xfe/0x160 [] vfs_write+0xc8/0x180 [] sys_write+0x53/0x90 [] system_call+0x7e/0x83 INFO: lockdep is turned off. agpgart: Setting up Nforce3 AGP. ohci_hcd 0000:00:02.0: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -= > IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b0000= 7, writing b00006) ohci_hcd 0000:00:02.1: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 PM: Writing back config space on device 0000:00:02.1 at offset 1 (was b0000= 7, writing b00006) ehci_hcd 0000:00:02.2: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -= > IRQ 21 PCI: Setting latency timer of device 0000:00:02.2 to 64 PM: Writing back config space on device 0000:00:06.0 at offset 1 (was b0000= 7, writing b00003) ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:08.0 to 64 PM: Writing back config space on device 0000:00:0a.0 at offset 9 (was fff0,= writing 57f05000) PM: Writing back config space on device 0000:00:0a.0 at offset 6 (was 80020= 200, writing 800a0200) PCI: Setting latency timer of device 0000:00:0a.0 to 64 PM: Writing back config space on device 0000:00:0b.0 at offset 7 (was 22000= f0, writing 222000f0) PM: Writing back config space on device 0000:02:00.0 at offset f (was 40201= 00, writing 402010b) PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 0, wr= iting e0100000) PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, wr= iting e0108000) PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, wr= iting 4010) PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 21000= 00, writing 2100116) PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, wr= iting e0108800) PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 1, wr= iting 7001) PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, wr= iting 4000) PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 29000= 00, writing 2900107) eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 PCI: Enabling device 0000:02:02.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -= > IRQ 17 PM: Writing back config space on device 0000:02:02.0 at offset f (was 100, = writing 10b) PM: Writing back config space on device 0000:02:02.0 at offset 4 (was 0, wr= iting e0104000) PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, wr= iting 4000) PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2, wr= iting 106) PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001= ff, writing 5c0010b) PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, wr= iting 34fc) PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, wr= iting 3400) PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, wr= iting 30fc) PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, wr= iting 3000) PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, wr= iting e07ff000) PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, wr= iting e0400000) PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, wr= iting 53fff000) PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, wr= iting 50000000) PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 40000= 000, writing b0060302) PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 82400= 8, writing 82a810) PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 21001= 07, writing 2100007) PM: Writing back config space on device 0000:02:04.1 at offset f (was 34002= ff, writing 5c0020a) PM: Writing back config space on device 0000:02:04.1 at offset e (was 0, wr= iting 3cfc) PM: Writing back config space on device 0000:02:04.1 at offset d (was 0, wr= iting 3c00) PM: Writing back config space on device 0000:02:04.1 at offset c (was 0, wr= iting 38fc) PM: Writing back config space on device 0000:02:04.1 at offset b (was 0, wr= iting 3800) PM: Writing back config space on device 0000:02:04.1 at offset a (was 0, wr= iting e0fff000) PM: Writing back config space on device 0000:02:04.1 at offset 9 (was 0, wr= iting e0c00000) PM: Writing back config space on device 0000:02:04.1 at offset 8 (was 0, wr= iting 57fff000) PM: Writing back config space on device 0000:02:04.1 at offset 7 (was e1000= 000, writing 54000000) PM: Writing back config space on device 0000:02:04.1 at offset 6 (was 40000= 000, writing b00a0702) PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 82400= 8, writing 82a810) PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 21001= 03, writing 2100007) PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 1, wr= iting 7401) PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 0, wr= iting 4010) PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 21000= 00, writing 2100107) PM: Writing back config space on device 0000:01:00.0 at offset f (was 10501= 00, writing 105010b) PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, wr= iting f8000008) PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, wr= iting f0000008) PM: Writing back config space on device 0000:01:00.0 at offset 4 (was 0, wr= iting e2000000) PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 0, wr= iting 4000) PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 2b000= 00, writing 2b00007) pnp: Failed to activate device 00:08. pnp: Failed to activate device 00:09. sd 0:0:0:0: [sda] Starting disk ata2: ACPI get timing mode failed (AE 0x1001) ata2.00: configured for MWDMA2 ata1: ACPI get timing mode failed (AE 0x1001) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA usb usb1: usb resume ehci_hcd 0000:00:02.2: resume root hub hub 1-0:1.0: hub_resume usb usb2: usb resume ohci_hcd 0000:00:02.0: resume root hub hub 2-0:1.0: hub_resume usb usb3: usb resume ohci_hcd 0000:00:02.1: resume root hub hub 3-0:1.0: hub_resume ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=3Dj CSC CON= NECT hub 1-0:1.0: port 1 status 0001.0501 after resume, 0 usb 1-1: can't resume, status -19 hub 1-0:1.0: logical disconnect on port 1 PM: Finishing wakeup. Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000 hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s usb 1-1: USB disconnect, address 2 usb 1-1: unregistering device usb 1-1: usb_disable_device nuking all URBs usb 1-1: unregistering interface 1-1:1.0 Buffer I/O error on device sdb1, logical block 5573 lost page write due to I/O error on sdb1 Buffer I/O error on device sdb1, logical block 5574 lost page write due to I/O error on sdb1 REISERFS: abort (device sdb1): Journal write error in flush_commit_list REISERFS: Aborting journal for filesystem on sdb1 done. usb 1-1:1.0: uevent usb 1-1:1.0: uevent usb 1-1: uevent ehci_hcd 0000:00:02.2: port 1 high speed ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=3Dse0 PE CO= NNECT usb 1-1: new high speed USB device using ehci_hcd and address 3 ehci_hcd 0000:00:02.2: port 1 high speed ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=3Dse0 PE CO= NNECT usb 1-1: default language 0x0409 usb 1-1: uevent usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: uevent usb 1-1:1.0: uevent hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: ganged power switching hub 1-1:1.0: global over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns) hub 1-1:1.0: Port indicators are supported hub 1-1:1.0: power on to power good time: 100ms hub 1-1:1.0: local power source is good hub 1-1:1.0: no over-current condition exists hub 1-1:1.0: enabling power on all ports usb 1-1: link qh256-0001/ffff81000515b140 start 255 [1/0 us] drivers/usb/core/inode.c: creating file '003' usb 1-1: new device found, idVendor=3D05e3, idProduct=3D0608 usb 1-1: new device strings: Mfr=3D0, Product=3D1, SerialNumber=3D0 usb 1-1: Product: USB2.0 Hub hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000 hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s ohci_hcd 0000:00:02.0: auto-stop root hub ohci_hcd 0000:00:02.1: auto-stop root hub hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 1-1.1: new full speed USB device using ehci_hcd and address 4 hub 1-1:1.0: port 1 not reset yet, waiting 10ms usb 1-1.1: ep0 maxpacket =3D 8 usb 1-1.1: default language 0x0409 usb 1-1.1: uevent usb 1-1.1: usb_probe_device usb 1-1.1: configuration #1 chosen from 1 choice usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) usb 1-1.1:1.0: uevent usb 1-1.1:1.0: uevent hub 1-1.1:1.0: usb_probe_interface hub 1-1.1:1.0: usb_probe_interface - got id hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 2 ports detected hub 1-1.1:1.0: compound device; port removable status: FF hub 1-1.1:1.0: ganged power switching hub 1-1.1:1.0: no over-current protection hub 1-1.1:1.0: power on to power good time: 100ms hub 1-1.1:1.0: hub controller current requirement: 100mA hub 1-1.1:1.0: 100mA bus power budget for each child hub 1-1.1:1.0: enabling power on all ports usb 1-1.1: link qh128-0e01/ffff81000515b280 start 127 [1/2 us] drivers/usb/core/inode.c: creating file '004' usb 1-1.1: new device found, idVendor=3D0451, idProduct=3D2036 usb 1-1.1: new device strings: Mfr=3D0, Product=3D1, SerialNumber=3D0 usb 1-1.1: Product: General Purpose USB Hub hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s vbetool[56819]: segfault at 000000000000548f rip 0000000000425ba7 rsp 00007= fffdbd82550 error 4 hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 usb 1-1.3: new high speed USB device using ehci_hcd and address 5 hub 1-1:1.0: port 3 not reset yet, waiting 10ms usb 1-1.3: default language 0x0409 usb 1-1.3: uevent usb 1-1.3: usb_probe_device usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) usb 1-1.3:1.0: uevent usb 1-1.3:1.0: uevent libusual 1-1.3:1.0: usb_probe_interface libusual 1-1.3:1.0: usb_probe_interface - got id usb-storage 1-1.3:1.0: usb_probe_interface usb-storage 1-1.3:1.0: usb_probe_interface - got id scsi3 : SCSI emulation for USB Mass Storage devices scsi 2:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdb1, logical block 5576 lost page write due to I/O error on sdb1 Buffer I/O error on device sdb1, logical block 5577 lost page write due to I/O error on sdb1 drivers/usb/core/inode.c: creating file '005' usb 1-1.3: new device found, idVendor=3D0781, idProduct=3Db4b5 usb 1-1.3: new device strings: Mfr=3D3, Product=3D4, SerialNumber=3D5 usb 1-1.3: Product: ImageMate 14 in 1 Reader/Writer=20 usb 1-1.3: Manufacturer: SanDisk=20 usb 1-1.3: SerialNumber: 0304237855 usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x101 usb 1-1.4: new full speed USB device using ehci_hcd and address 6 usb 1-1.4: ep0 maxpacket =3D 8 usb 1-1.4: default language 0x0409 usb 1-1.4: uevent usb 1-1.4: usb_probe_device usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) usb 1-1.4:1.0: uevent usb 1-1.4:1.0: uevent hub 1-1.4:1.0: usb_probe_interface hub 1-1.4:1.0: usb_probe_interface - got id hub 1-1.4:1.0: USB hub found hub 1-1.4:1.0: 3 ports detected hub 1-1.4:1.0: compound device; port removable status: FFF hub 1-1.4:1.0: ganged power switching hub 1-1.4:1.0: global over-current protection hub 1-1.4:1.0: power on to power good time: 100ms hub 1-1.4:1.0: local power source is good hub 1-1.4:1.0: no over-current condition exists hub 1-1.4:1.0: enabling power on all ports usb 1-1.4: link qh128-0e01/ffff81000515b460 start 127 [1/2 us] drivers/usb/core/inode.c: creating file '006' usb 1-1.4: new device found, idVendor=3D045e, idProduct=3D0707 usb 1-1.4: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 1-1.4: Product: Microsoft USB Hub usb 1-1.4: Manufacturer: Microsoft hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010 hub 1-1.1:1.0: state 7 ports 2 chg 0000 evt 0002 hub 1-1.1:1.0: port 1, status 0301, change 0001, 1.5 Mb/s hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 usb 1-1.1.1: new low speed USB device using ehci_hcd and address 7 usb 1-1.1.1: skipped 1 descriptor after interface usb 1-1.1.1: skipped 1 descriptor after interface usb 1-1.1.1: default language 0x0409 usb 1-1.1.1: uevent usb 1-1.1.1: usb_probe_device usb 1-1.1.1: configuration #1 chosen from 1 choice usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0) usb 1-1.1.1:1.0: uevent usb 1-1.1.1:1.0: uevent usb 1-1.1.1: adding 1-1.1.1:1.1 (config #1, interface 1) usb 1-1.1.1:1.1: uevent usb 1-1.1.1:1.1: uevent drivers/usb/core/inode.c: creating file '007' usb 1-1.1.1: new device found, idVendor=3D046d, idProduct=3Dc704 usb 1-1.1.1: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D3 usb 1-1.1.1: Product: USB Receiver usb 1-1.1.1: Manufacturer: Logitech usb 1-1.1.1: SerialNumber: 04E5EF hub 1-1.1:1.0: 302mA power budget left hub 1-1.4:1.0: state 7 ports 3 chg 0000 evt 0008 hub 1-1.4:1.0: port 3, status 0101, change 0001, 12 Mb/s hub 1-1.4:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 usb 1-1.4.3: new full speed USB device using ehci_hcd and address 8 hub 1-1.4:1.0: port 3 not reset yet, waiting 10ms usb 1-1.4.3: ep0 maxpacket =3D 8 usb 1-1.4.3: skipped 1 descriptor after interface usb 1-1.4.3: default language 0x0409 usb 1-1.4.3: uevent usb 1-1.4.3: usb_probe_device usb 1-1.4.3: configuration #1 chosen from 1 choice usb 1-1.4.3: adding 1-1.4.3:1.0 (config #1, interface 0) usb 1-1.4.3:1.0: uevent usb 1-1.4.3:1.0: uevent drivers/usb/core/inode.c: creating file '008' usb 1-1.4.3: new device found, idVendor=3D045e, idProduct=3D0714 usb 1-1.4.3: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D3 usb 1-1.4.3: Product: Microsoft? Wireless Laser Mouse 8000 usb 1-1.4.3: Manufacturer: Microsoft usb 1-1.4.3: SerialNumber: 00125A5F14F3 hub 1-1.1:1.0: state 7 ports 2 chg 0000 evt 0002 hub 1-1.4:1.0: state 7 ports 3 chg 0000 evt 0008 usbhid 1-1.1.1:1.0: usb_probe_interface usbhid 1-1.1.1:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.2/usb1/1-1/1= -1.1/1-1.1.1/1-1.1.1:1.0/input/input7 usb 1-1.1.1: link qh8-0e01/ffff81000515b640 start 7 [1/2 us] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.2-1= .1.1 usbhid 1-1.1.1:1.1: usb_probe_interface usbhid 1-1.1.1:1.1: usb_probe_interface - got id input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.2/usb1/1-1/1= -1.1/1-1.1.1/1-1.1.1:1.1/input/input8 usb 1-1.1.1: link qh8-1c02/ffff81000515b6e0 start 7 [1/2 us] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.2-1.1.= 1 usbhid 1-1.4.3:1.0: usb_probe_interface usbhid 1-1.4.3:1.0: usb_probe_interface - got id input: Microsoft Microsoft? Wireless Laser Mouse 8000 as /devices/pci0000:0= 0/0000:00:02.2/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.0/input/input9 input: USB HID v1.11 Mouse [Microsoft Microsoft? Wireless Laser Mouse 8000]= on usb-0000:00:02.2-1.4.3 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ohci_hcd 0000:00:02.0: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend ohci_hcd 0000:00:02.1: suspend root hub usb 1-1.4.3: link qh4-3804/ffff81000515b780 start 3 [1/2 us] usb 1-1.4.3: unlink qh4-3804/ffff81000515b780 start 3 [1/2 us] ehci_hcd 0000:00:02.2: reused qh ffff81000515b780 schedule usb 1-1.4.3: link qh4-3804/ffff81000515b780 start 3 [1/2 us] usb 1-1.4.3: unlink qh4-3804/ffff81000515b780 start 3 [1/2 us] ehci_hcd 0000:00:02.2: reused qh ffff81000515b780 schedule usb 1-1.4.3: link qh4-3804/ffff81000515b780 start 3 [1/2 us] usb-storage: device scan complete scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 9339 PQ: 0 ANSI: = 0 scsi 3:0:0:1: Direct-Access Generic STORAGE DEVICE 9339 PQ: 0 ANSI: = 0 scsi 3:0:0:2: Direct-Access Generic STORAGE DEVICE 9339 PQ: 0 ANSI: = 0 scsi 3:0:0:3: Direct-Access Generic STORAGE DEVICE 9339 PQ: 0 ANSI: = 0 sd 3:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 3:0:0:0: [sdb] Assuming drive cache: write through sd 3:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 3:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 3:0:0:0: [sdb] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:1: [sdc] Attached SCSI removable disk sd 3:0:0:1: Attached scsi generic sg3 type 0 sd 3:0:0:2: [sdd] Attached SCSI removable disk sd 3:0:0:2: Attached scsi generic sg4 type 0 sd 3:0:0:3: [sde] Attached SCSI removable disk sd 3:0:0:3: Attached scsi generic sg5 type 0 Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 netconsole: local port 6665 netconsole: local IP 0.0.0.0 netconsole: interface eth0 netconsole: remote port 6666 netconsole: remote IP 192.168.100.113 netconsole: remote ethernet address 00:0a:e6:a7:29:60 netconsole: local IP 192.168.100.240 console [netcon0] enabled netconsole: network logging started eth0: no IPv6 routers present end_request: I/O error, dev sr0, sector 112 Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! --=20 Zan Lynx --=-k7Q2jzq8vDRQ/GdXH0MO Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.7 (GNU/Linux) iD8DBQBHBmexG8fHaOLTWwgRAh0sAJ99uxOfHGg84vfV3NydR/8ef8gM/QCggnKR sat1PEZegCfjAFHy7aqr+7Q= =ZNMq -----END PGP SIGNATURE----- --=-k7Q2jzq8vDRQ/GdXH0MO-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/