Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Bhupesh Sharma <bhupesh.sharma@linaro.org>
To:     linux-arm-msm@vger.kernel.org
Cc:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        linux-kernel@vger.kernel.org, bhupesh.linux@gmail.com,
        bhupesh.sharma@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski@linaro.org, devicetree@vger.kernel.org,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v4 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
Date:   Tue, 16 May 2023 13:29:07 +0530
Message-Id: <20230516075908.2323372-3-bhupesh.sharma@linaro.org>
In-Reply-To: <20230516075908.2323372-1-bhupesh.sharma@linaro.org>
References: <20230516075908.2323372-1-bhupesh.sharma@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same.
This allows the uSD card to be properly detected on the board.

Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 504543ad1a1b..abea44fd369d 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -203,7 +203,7 @@ &sdhc_1 {
 };
 
 &sdhc_2 {
-	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
 
 	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
 	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
-- 
2.38.1