Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 16 May 2023 15:24:52 +0300
From:   Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <ville.syrjala@linux.intel.com>
To:     Niklas Schnelle <schnelle@linux.ibm.com>
Cc:     Arnd Bergmann <arnd@arndb.de>, Helge Deller <deller@gmx.de>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= 
        <u.kleine-koenig@pengutronix.de>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Alan Stern <stern@rowland.harvard.edu>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Geert Uytterhoeven <geert@linux-m68k.org>,
        Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
        linux-pci@vger.kernel.org, linux-fbdev@vger.kernel.org,
        dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v4 37/41] fbdev: atyfb: Remove unused clock determination
Message-ID: <ZGN2FKSBkMREujgR@intel.com>
References: <20230516110038.2413224-1-schnelle@linux.ibm.com>
 <20230516110038.2413224-38-schnelle@linux.ibm.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20230516110038.2413224-38-schnelle@linux.ibm.com>
Precedence: bulk

On Tue, May 16, 2023 at 01:00:33PM +0200, Niklas Schnelle wrote:
> Just below the removed lines par->clk_wr_offset is hard coded to 3 so
> there is no use in determining a different clock just to then ignore it
> anyway. This also removes the only I/O port use remaining in the driver
> allowing it to be built without CONFIG_HAS_IOPORT.
> 
> Link: https://lore.kernel.org/all/ZBx5aLo5h546BzBt@intel.com/
> Suggested-by: Ville Syrj?l? <ville.syrjala@linux.intel.com>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>

Reviewed-by: Ville Syrj?l? <ville.syrjala@linux.intel.com>

> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>       per-subsystem patches may be applied independently
> 
>  drivers/video/fbdev/aty/atyfb_base.c | 5 -----
>  1 file changed, 5 deletions(-)
> 
> diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
> index b02e4e645035..cba2b113b28b 100644
> --- a/drivers/video/fbdev/aty/atyfb_base.c
> +++ b/drivers/video/fbdev/aty/atyfb_base.c
> @@ -3498,11 +3498,6 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
>  	if (ret)
>  		goto atyfb_setup_generic_fail;
>  #endif
> -	if (!(aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_EXT_DISP_EN))
> -		par->clk_wr_offset = (inb(R_GENMO) & 0x0CU) >> 2;
> -	else
> -		par->clk_wr_offset = aty_ld_8(CLOCK_CNTL, par) & 0x03U;
> -
>  	/* according to ATI, we should use clock 3 for acelerated mode */
>  	par->clk_wr_offset = 3;
>  
> -- 
> 2.39.2

-- 
Ville Syrj?l?
Intel