Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <da77a377-4a9e-be8d-7b14-aeb270b7183e@kernel.org>
Date:   Tue, 16 May 2023 22:18:52 +0900
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.0
Subject: Re: [PATCH v4 02/41] ata: add HAS_IOPORT dependencies
To:     Niklas Schnelle <schnelle@linux.ibm.com>,
        Arnd Bergmann <arnd@arndb.de>,
        Sergey Shtylyov <s.shtylyov@omp.ru>
Cc:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        =?UTF-8?Q?Uwe_Kleine-K=c3=b6nig?= <u.kleine-koenig@pengutronix.de>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Alan Stern <stern@rowland.harvard.edu>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Geert Uytterhoeven <geert@linux-m68k.org>,
        Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
        linux-pci@vger.kernel.org, Arnd Bergmann <arnd@kernel.org>,
        Damien Le Moal <damien.lemoal@opensource.wdc.com>,
        linux-ide@vger.kernel.org
References: <20230516110038.2413224-1-schnelle@linux.ibm.com>
 <20230516110038.2413224-3-schnelle@linux.ibm.com>
Content-Language: en-US
From:   Damien Le Moal <dlemoal@kernel.org>
Organization: Western Digital Research
In-Reply-To: <20230516110038.2413224-3-schnelle@linux.ibm.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 5/16/23 19:59, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>       per-subsystem patches may be applied independently
> 
>  drivers/ata/Kconfig       | 28 ++++++++++++++--------------
>  drivers/ata/ata_generic.c |  2 ++
>  drivers/ata/libata-sff.c  |  2 ++
>  include/linux/libata.h    |  2 ++
>  4 files changed, 20 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 42b51c9812a0..c521cdc51f8c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -557,7 +557,7 @@ comment "PATA SFF controllers with BMDMA"
>  
>  config PATA_ALI
>  	tristate "ALi PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	select PATA_TIMINGS
>  	help
>  	  This option enables support for the ALi ATA interfaces
> @@ -567,7 +567,7 @@ config PATA_ALI
>  
>  config PATA_AMD
>  	tristate "AMD/NVidia PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	select PATA_TIMINGS
>  	help
>  	  This option enables support for the AMD and NVidia PATA
> @@ -585,7 +585,7 @@ config PATA_ARASAN_CF
>  
>  config PATA_ARTOP
>  	tristate "ARTOP 6210/6260 PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for ARTOP PATA controllers.
>  
> @@ -612,7 +612,7 @@ config PATA_ATP867X
>  
>  config PATA_CMD64X
>  	tristate "CMD64x PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	select PATA_TIMINGS
>  	help
>  	  This option enables support for the CMD64x series chips
> @@ -659,7 +659,7 @@ config PATA_CS5536
>  
>  config PATA_CYPRESS
>  	tristate "Cypress CY82C693 PATA support (Very Experimental)"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	select PATA_TIMINGS
>  	help
>  	  This option enables support for the Cypress/Contaq CY82C693
> @@ -707,7 +707,7 @@ config PATA_HPT366
>  
>  config PATA_HPT37X
>  	tristate "HPT 370/370A/371/372/374/302 PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for the majority of the later HPT
>  	  PATA controllers via the new ATA layer.
> @@ -716,7 +716,7 @@ config PATA_HPT37X
>  
>  config PATA_HPT3X2N
>  	tristate "HPT 371N/372N/302N PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for the N variant HPT PATA
>  	  controllers via the new ATA layer.
> @@ -819,7 +819,7 @@ config PATA_MPC52xx
>  
>  config PATA_NETCELL
>  	tristate "NETCELL Revolution RAID support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for the Netcell Revolution RAID
>  	  PATA controller.
> @@ -855,7 +855,7 @@ config PATA_OLDPIIX
>  
>  config PATA_OPTIDMA
>  	tristate "OPTI FireStar PATA support (Very Experimental)"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables DMA/PIO support for the later OPTi
>  	  controllers found on some old motherboards and in some
> @@ -865,7 +865,7 @@ config PATA_OPTIDMA
>  
>  config PATA_PDC2027X
>  	tristate "Promise PATA 2027x support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
>  
> @@ -873,7 +873,7 @@ config PATA_PDC2027X
>  
>  config PATA_PDC_OLD
>  	tristate "Older Promise PATA controller support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for the Promise 20246, 20262, 20263,
>  	  20265 and 20267 adapters.
> @@ -901,7 +901,7 @@ config PATA_RDC
>  
>  config PATA_SC1200
>  	tristate "SC1200 PATA support"
> -	depends on PCI && (X86_32 || COMPILE_TEST)
> +	depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
>  	help
>  	  This option enables support for the NatSemi/AMD SC1200 SoC
>  	  companion chip used with the Geode processor family.
> @@ -919,7 +919,7 @@ config PATA_SCH
>  
>  config PATA_SERVERWORKS
>  	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
> -	depends on PCI
> +	depends on PCI && HAS_IOPORT
>  	help
>  	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
>  	  HT1000 PATA controllers, via the new ATA layer.
> @@ -1183,7 +1183,7 @@ config ATA_GENERIC
>  
>  config PATA_LEGACY
>  	tristate "Legacy ISA PATA support (Experimental)"
> -	depends on (ISA || PCI)
> +	depends on (ISA || PCI) && HAS_IOPORT
>  	select PATA_TIMINGS
>  	help
>  	  This option enables support for ISA/VLB/PCI bus legacy PATA
> diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
> index 2f57ec00ab82..2d391d117f74 100644
> --- a/drivers/ata/ata_generic.c
> +++ b/drivers/ata/ata_generic.c
> @@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
>  	if (!(command & PCI_COMMAND_IO))
>  		return -ENODEV;
>  
> +#ifdef CONFIG_PATA_ALI
>  	if (dev->vendor == PCI_VENDOR_ID_AL)
>  		ata_pci_bmdma_clear_simplex(dev);
> +#endif /* CONFIG_PATA_ALI */

You can drop this change if...

>  
>  	if (dev->vendor == PCI_VENDOR_ID_ATI) {
>  		int rc = pcim_enable_device(dev);
> diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
> index 9d28badfe41d..80137edb7ebf 100644
> --- a/drivers/ata/libata-sff.c
> +++ b/drivers/ata/libata-sff.c
> @@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
>  
>  #ifdef CONFIG_PCI
>  
> +#ifdef CONFIG_HAS_IOPORT
>  /**
>   *	ata_pci_bmdma_clear_simplex -	attempt to kick device out of simplex
>   *	@pdev: PCI device
> @@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
> +#endif /* CONFIG_HAS_IOPORT */

...you move the #ifdef CONFIG_HAS_IOPORT inside the function as the first line
and have the #endif right before the last "return 0;" (so the function only does
return 0 for the !CONFIG_HAS_IOPORT case).

>  
>  static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
>  {
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 311cd93377c7..90002d4a785b 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
>  extern int ata_bmdma_port_start32(struct ata_port *ap);
>  
>  #ifdef CONFIG_PCI
> +#ifdef CONFIG_HAS_IOPORT
>  extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
> +#endif /* CONFIG_HAS_IOPORT */

And then you do not need these #ifdef/endif here. Overall, a lot less of #ifdef
which I personally really dislike to see in .c files :)

>  extern void ata_pci_bmdma_init(struct ata_host *host);
>  extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
>  				      const struct ata_port_info * const * ppi,

-- 
Damien Le Moal
Western Digital Research