Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <0ef2018d-6747-bf41-0cce-002dcb4bc369@quicinc.com>
Date:   Tue, 16 May 2023 20:14:41 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.1
Subject: Re: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport
 controller node for SC8280
Content-Language: en-US
To:     Johan Hovold <johan@kernel.org>
CC:     Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        "Andy Gross" <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        "Konrad Dybcio" <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Felipe Balbi <balbi@kernel.org>, <linux-usb@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <quic_pkondeti@quicinc.com>,
        <quic_ppratap@quicinc.com>, <quic_wcheng@quicinc.com>,
        <quic_jackp@quicinc.com>, <quic_harshq@quicinc.com>,
        <ahalaney@redhat.com>
References: <20230514054917.21318-1-quic_kriskura@quicinc.com>
 <20230514054917.21318-8-quic_kriskura@quicinc.com>
 <ZGJBLUsPcbsxj989@hovoldconsulting.com>
 <d14567fd-0576-55bb-40c0-442e060c28ba@quicinc.com>
 <ZGNgyo8ZRcC26W5l@hovoldconsulting.com>
 <a22a3fe6-7bb1-9b47-9a14-41d957f178f3@quicinc.com>
 <ZGOWayVsjhR2Y0cN@hovoldconsulting.com>
From:   Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
In-Reply-To: <ZGOWayVsjhR2Y0cN@hovoldconsulting.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 5/16/2023 8:12 PM, Johan Hovold wrote:
> On Tue, May 16, 2023 at 07:54:00PM +0530, Krishna Kurapati PSSNV wrote:
>>
>>
>> On 5/16/2023 4:24 PM, Johan Hovold wrote:
>>> On Mon, May 15, 2023 at 09:02:13PM +0530, Krishna Kurapati PSSNV wrote:
>>>> On 5/15/2023 7:56 PM, Johan Hovold wrote:
>>>>> On Sun, May 14, 2023 at 11:19:15AM +0530, Krishna Kurapati wrote:
>>>
>>>>>> @@ -3133,6 +3133,72 @@ usb_1_role_switch: endpoint {
>>>>>>     			};
>>>>>>     		};
>>>>>>     
>>>>>> +		usb_2: usb@a4f8800 {
>>>>>
>>>>> As I believe someone already pointed out, this node is not in sort order
>>>>> (i.e. it should go before usb@a6f8800).
>>>
>>>>      I missed that message, but since I named it usb_2, so I placed it in
>>>> order after usb_1. Hope that is fine !!
>>>
>>> No, the nodes should be sorted by unit address so you need to move it.
>>>
>>
>> Sure, in that case will put it in between usb_0 and usb_1 nodes.
> 
> No, it goes before usb_0 on sc8280xp.
> 
>             usb_2: usb@a4f8800 {
>             usb_0: usb@a6f8800 {
>             usb_1: usb@a8f8800 {
> 
>>>>>> +			interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
>>>>>> +					      <&pdc 126 IRQ_TYPE_EDGE_RISING>,
>>>>>> +					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					      <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					      <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					      <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +
>>>>>> +			interrupt-names = "dp_hs_phy_irq",
>>>>>> +					  "dm_hs_phy_irq",
>>>>>> +					  "ss_phy_irq",
>>>>>> +					  "pwr_event_1",
>>>>>> +					  "pwr_event_2",
>>>>>> +					  "pwr_event_3",
>>>>>> +					  "pwr_event_4";
>>>
>>>>>> +			interconnect-names = "usb-ddr", "apps-usb";
>>>>>
>>>>> Looks like 'wakeup-source' is missing here too.
>>>>>
>>>>
>>>> I believe this property was added to enable wakeup from system suspend
>>>> in host mode. I didn't add this property as currently I don't need to
>>>> support wakeup. If any requirement comes in future, then I might need to
>>>> add dp/dm interrupts (if any) for other ports as well and then need to
>>>> change driver code to enable/disable them on suspend/resume.
>>>
>>> If there are dp/dm/ss interrupts per ports then those need to be defined
>>> in the binding and devicetree from the start.
>>>
>>> Similar for 'wakeup-source' which indicates that the controller *can* be
>>> used to wakeup the system from suspend (which those pdc interrupts
>>> indicates).
>>>
>>> Remember that the devicetree is supposed to describe the hardware, and
>>> which features are currently supported in some version of software is
>>> mostly irrelevant.
> 
>> Can I take this up as a separate series (Wakeup support for multiport)
>> once this series is merged. If I am adding interrupts for other ports, I
>> can add driver code to handle those interrupts as well.
> 
> Nope. You can possibly add driver support later, but the binding and
> dtsi need to be correct from the start (and it may be easier to do it
> all at once).
> 

Ok, will add this in v9.

Regards,
Krishna,