Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 16 May 2023 18:46:55 +0100
From:   Jonathan McDowell <noodles@earth.li>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Samuel Holland <samuel@sholland.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <brgl@bgdev.pl>,
        Conor Dooley <conor+dt@kernel.org>, andy.shevchenko@gmail.com
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
        linux-gpio@vger.kernel.org
Subject: [PATCH v3 0/5] Minor device-tree additions for C.H.I.P
Message-ID: <cover.1684258957.git.noodles@earth.li>
References: <cover.1683719613.git.noodles@earth.li>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <cover.1683719613.git.noodles@earth.li>
Precedence: bulk

This small patch series adds some improvements for the C.H.I.P DTS,
enabling bluetooth, exporting the PMIC temperature details via iio-hwmon
and finally adding the appropriate base pinmux info for an external MMC
card. As a pre-requisite for the Bluetooth it also adds support to the
AXP209 driver for GPIO3, which is the Bluetooth device wakeup line.

v3:
- Add Reviewed-By/Acked-Bys
- Drop redundant else
- Switch to GENMASK/decimal values for GPIO3 function defs
v2:
- Fix missing ; on bluetooth stanza in DTS
- Add device/host wake GPIOs for Bluetooth device
- Add omit-if-no-ref on the port E pinmux stanza
- Rename axp20x_temp to pmic-temp
- Add AXP209 GPIO3 support

Jonathan McDowell (5):
  dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema
  pinctrl: axp209: Add support for GPIO3 on the AXP209
  ARM: dts: sun5i: chip: Enable bluetooth
  ARM: dts: sun5i: Add port E pinmux settings for mmc2
  ARM: dts: axp209: Add iio-hwmon node for internal temperature

 .../bindings/gpio/x-powers,axp209-gpio.yaml   |  1 +
 arch/arm/boot/dts/axp209.dtsi                 |  7 ++++
 arch/arm/boot/dts/sun5i-r8-chip.dts           |  6 +++
 arch/arm/boot/dts/sun5i.dtsi                  |  9 ++++
 drivers/pinctrl/pinctrl-axp209.c              | 42 +++++++++++++++++++
 5 files changed, 65 insertions(+)

-- 
2.39.2