Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   <Ryan.Wanner@microchip.com>
To:     <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <nicolas.ferre@microchip.com>,
        <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>,
        <linus.walleij@linaro.org>, <ludovic.desroches@microchip.com>
CC:     <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
        Ryan Wanner <Ryan.Wanner@microchip.com>
Subject: [PATCH 0/3] AT91 PIO4 push-pull enable
Date:   Wed, 17 May 2023 13:54:03 +0200
Message-ID: <cover.1684313910.git.Ryan.Wanner@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Ryan Wanner <Ryan.Wanner@microchip.com>

This patch set enables push-pull pin configuation for PIO4 IP as well as
updating the DT binding.

Removing the integer argument for open-drain allows the driver to
process drive configuration from gpiolib as the integer argument is
discarded.

Ryan Wanner (3):
  pinctrl: at91-pio4: Enable Push-Pull configuration
  dt-bindings: pinctrl: at91-pio4: Add push-pull support
  ARM: dts: at91: Return to boolean properties

 .../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt  |  3 ++-
 arch/arm/boot/dts/at91-kizbox3-hs.dts             |  2 +-
 arch/arm/boot/dts/at91-kizbox3_common.dtsi        |  2 +-
 drivers/pinctrl/pinctrl-at91-pio4.c               | 15 +++++++++++----
 4 files changed, 15 insertions(+), 7 deletions(-)

-- 
2.39.2