Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <886904c2-26ea-8876-a6cf-b8de6ff94799@linux.intel.com>
Date:   Wed, 17 May 2023 16:15:18 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Firefox/102.0 Thunderbird/102.11.0
Subject: Re: [PATCH - for 6.4] tpm: tpm_tis: Disable interrupts for AEON
 UPX-i11
To:     peterhuewe@gmx.de, jarkko@kernel.org
Cc:     jgg@ziepe.ca, linux-integrity@vger.kernel.org,
        linux-kernel@vger.kernel.org, l.sanfilippo@kunbus.com,
        jsnitsel@redhat.com
References: <20230517122931.22385-1-peter.ujfalusi@linux.intel.com>
Content-Language: en-US
From:   =?UTF-8?Q?P=c3=a9ter_Ujfalusi?= <peter.ujfalusi@linux.intel.com>
In-Reply-To: <20230517122931.22385-1-peter.ujfalusi@linux.intel.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk


On 17/05/2023 15:29, Peter Ujfalusi wrote:
> The interrupts initially works on the device but they will stop arriving
> after about 200 interrupts.
> 
> On system reboot/shutdown this will cause a long wait (120000 jiffies).
> 
> The interrupts on this device got enabled by commit
> e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
> 
> Prior to this point the interrupts were not enabled on this machine.
> 
> Complements: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
> ---
> Hi,
> 
> This patch applies on top of mainline since 6.4-rc1 takes about 2 minutes to
> reboot on this machine, linux-next have
> e7d3e5c4b1dd tpm/tpm_tis: Disable interrupts for more Lenovo devices
> 
> I'm not sure if I shouold send this on top of next or mainline is fine, please
> let me know the preferred way to get this to 6.4.

In 6.3 the kernel prints this on boot:
# dmesg -w | grep tpm
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead

It is interesting that with 6.4 most of the times the interrupts got
enabled (without this patch) resulting stall during reboot/shutdown but
there are few boots when the driver falls back to polling and thus the
TPM driver works.

The command which 'locks' the system is TPM2_CC_SHUTDOWN, it is given
TPM_UNDEFINED as duration index by tpm2_ordinal_duration_index().

> 
> Regards,
> Peter
> 
>  drivers/char/tpm/tpm_tis.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 7af389806643..aad682c2ab21 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -122,6 +122,13 @@ static const struct dmi_system_id tpm_tis_dmi_table[] = {
>  			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T490s"),
>  		},
>  	},
> +	{
> +		.callback = tpm_tis_disable_irq,
> +		.ident = "UPX-TGL",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
> +		},
> +	},
>  	{}
>  };
>  

-- 
Péter