Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <f757a566-e330-8067-dc9a-16998abbe80a@linaro.org>
Date:   Wed, 17 May 2023 21:17:49 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH 2/3] arm64: dts: qcom: pm8550: add flash LED controller
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Fenglin Wu <quic_fenglinw@quicinc.com>,
        linux-arm-msm@vger.kernel.org, linux-leds@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Neil Armstrong <neil.armstrong@linaro.org>,
        "Signed-off-by : Abel Vesa" <abel.vesa@linaro.org>
References: <20230516150202.188655-1-krzysztof.kozlowski@linaro.org>
 <20230516150202.188655-2-krzysztof.kozlowski@linaro.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230516150202.188655-2-krzysztof.kozlowski@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 16.05.2023 17:02, Krzysztof Kozlowski wrote:
> Add node for PM8550 PMIC flash LED controller.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8550.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
> index 46396ec1a330..33f357a80636 100644
> --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
> @@ -55,5 +55,11 @@ pm8550_gpios: gpio@8800 {
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  		};
> +
> +		pm8550_flash: led-controller@ee00 {
> +			compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
> +			reg = <0xee00>;
> +			status = "disabled";
> +		};
>  	};
>  };