Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Dylan Van Assche <me@dylanvanassche.be>
To:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        pavel@ucw.cz, lee@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        quic_fenglinw@quicinc.com
Cc:     linux-arm-msm@vger.kernel.org, linux-leds@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        amartinz@shiftphones.com, Dylan Van Assche <me@dylanvanassche.be>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 2/3] arm64: dts: qcom: pmi8998: add flash LED controller
Date:   Thu, 18 May 2023 15:31:12 +0200
Message-Id: <20230518133113.273880-3-me@dylanvanassche.be>
In-Reply-To: <20230518133113.273880-1-me@dylanvanassche.be>
References: <20230518133113.273880-1-me@dylanvanassche.be>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Qualcomm PMIC PMI8998 has a 3 channel flash LED driver which is used
by many phones for 1 or 2 flash LEDs. Each LED can be used in flash mode
or torch mode. Add the flash LED controller node to PMI8998 DTS.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index ffe587f281d8..08e00819b39d 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -60,6 +60,12 @@ pmi8998_lpg: pwm {
 			status = "disabled";
 		};
 
+		pmi8998_flash: led-controller@d300 {
+			compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
 		pmi8998_wled: leds@d800 {
 			compatible = "qcom,pmi8998-wled";
 			reg = <0xd800>, <0xd900>;
-- 
2.40.1