Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Randy Dunlap <rdunlap@infradead.org>
To:     linux-kernel@vger.kernel.org
Cc:     Randy Dunlap <rdunlap@infradead.org>,
        Michael Ellerman <mpe@ellerman.id.au>,
        Nicholas Piggin <npiggin@gmail.com>,
        Christophe Leroy <christophe.leroy@csgroup.eu>,
        linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 RESEND] powerpc/embedded6xx: select MPC10X_BRIDGE only if PCI is set
Date:   Sun, 21 May 2023 15:51:03 -0700
Message-Id: <20230521225103.19197-1-rdunlap@infradead.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

When CONFIG_SMP is not set, CONFIG_BROKEN_ON_SMP is set, and
CONFIG_PCI is not set, there can be a kconfig warning:

WARNING: unmet direct dependencies detected for PPC_INDIRECT_PCI
  Depends on [n]: PCI [=n]
  Selected by [y]:
  - MPC10X_BRIDGE [=y]

To fix that, make the selects of MPC10X_BRIDGE be conditional
on PCI and use "imply" instead of "select".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> # use "imply"
---
v2: use imply instead of select (mpe)

 arch/powerpc/platforms/embedded6xx/Kconfig |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff -- a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -10,7 +10,7 @@ config LINKSTATION
 	select FSL_SOC
 	select PPC_UDBG_16550 if SERIAL_8250
 	select DEFAULT_UIMAGE
-	select MPC10X_BRIDGE
+	imply MPC10X_BRIDGE if PCI
 	help
 	  Select LINKSTATION if configuring for one of PPC- (MPC8241)
 	  based NAS systems from Buffalo Technology. So far only
@@ -24,7 +24,7 @@ config STORCENTER
 	select MPIC
 	select FSL_SOC
 	select PPC_UDBG_16550 if SERIAL_8250
-	select MPC10X_BRIDGE
+	imply MPC10X_BRIDGE if PCI
 	help
 	  Select STORCENTER if configuring for the iomega StorCenter
 	  with an 8241 CPU in it.