Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <0e645486-f0be-4468-18ad-9e49088dee0b@quicinc.com>
Date:   Mon, 22 May 2023 11:41:22 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.0
Subject: Re: [PATCH v3] firmware: qcom_scm: Clear download bit during reboot
Content-Language: en-US
To:     Robert Marko <robimarko@gmail.com>, <agross@kernel.org>,
        <andersson@kernel.org>, <konrad.dybcio@linaro.org>
CC:     <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <1678979666-551-1-git-send-email-quic_mojha@quicinc.com>
 <76943268-3982-deaf-9736-429dd51e01b0@gmail.com>
From:   Mukesh Ojha <quic_mojha@quicinc.com>
In-Reply-To: <76943268-3982-deaf-9736-429dd51e01b0@gmail.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk


On 5/18/2023 3:45 PM, Robert Marko wrote:
> 
> On 16. 03. 2023. 16:14, Mukesh Ojha wrote:
>> During normal restart of a system download bit should
>> be cleared irrespective of whether download mode is
>> set or not.
>>
>> Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control")
>> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
> 
> Hi, this has been backported to 5.15.111, however it seems to be 
> breaking reboot
> on IPQ4019 by causing the board to then hang in SBL with:
> root@OpenWrt:/# reboot
> root@OpenWrt:/# [   76.473541] device lan1 left promiscuous mode
> [   76.474204] br-lan: port 1(lan1) entered disabled state
> [   76.527975] device lan2 left promiscuous mode
> [   76.530301] br-lan: port 2(lan2) entered disabled state
> [   76.579376] device lan3 left promiscuous mode
> [   76.581698] br-lan: port 3(lan3) entered disabled state
> [   76.638434] device lan4 left promiscuous mode
> [   76.638777] br-lan: port 4(lan4) entered disabled state
> [   76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down
> [   76.978883] device eth0 left promiscuous mode
> [   76.987077] ipqess-edma c080000.ethernet eth0: Link is Down
> [
> Format: Log Type - Time(microsec) - Message - Optional Info
> Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
> S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
> S - IMAGE_VARIANT_STRING=DAABANAZA
> S - OEM_IMAGE_VERSION_STRING=CRM
> S - Boot Config, 0x00000021
> S - Reset status Config, 0x00000010
> S - Core 0 Frequency, 0 MHz
> B -       261 - PBL, Start
> B -      1339 - bootable_media_detect_entry, Start
> B -      1679 - bootable_media_detect_success, Start
> B -      1693 - elf_loader_entry, Start
> B -      5076 - auth_hash_seg_entry, Start
> B -      7223 - auth_hash_seg_exit, Start
> B -    578349 - elf_segs_hash_verify_entry, Start
> B -    696356 - PBL, End
> B -    696380 - SBL1, Start
> B -    787236 - pm_device_init, Start
> D -         7 - pm_device_init, Delta
> B -    788701 - boot_flash_init, Start
> D -     52782 - boot_flash_init, Delta
> B -    845625 - boot_config_data_table_init, Start
> D -      3836 - boot_config_data_table_init, Delta - (419 Bytes)
> B -    852841 - clock_init, Start
> D -      7566 - clock_init, Delta
> B -    864883 - CDT version:2,Platform ID:9,Major ID:0,Minor 
> ID:0,Subtype:64
> B -    868413 - sbl1_ddr_set_params, Start
> B -    873402 - cpr_init, Start
> D -         2 - cpr_init, Delta
> B -    877842 - Pre_DDR_clock_init, Start
> D -         4 - Pre_DDR_clock_init, Delta
> D -     13234 - sbl1_ddr_set_params, Delta
> B -    891155 - pm_driver_init, Start
> D -         2 - pm_driver_init, Delta
> B -    909105 - Image Load, Start
> B -   1030210 - Boot error ocuured!. Error code: 303d
> 
> Reverting the commit fixes rebooting.

Hi Robert,

Can you check if disable SDI [1] works with this issue

https://lore.kernel.org/linux-arm-msm/20230518140224.2248782-1-robimarko@gmail.com/

[1]


diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index fde33acd46b7..01496ceb7136 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1508,6 +1508,7 @@ static int qcom_scm_probe(struct platform_device 
*pdev)
  static void qcom_scm_shutdown(struct platform_device *pdev)
  {
         /* Clean shutdown, disable download mode to allow normal restart */
+       qcom_scm_disable_sdi();
         qcom_scm_set_download_mode(false);
  }


-- Mukesh

> 
> Regards,
> Robert
> 
>> ---
>> Changes in v3:
>>    - Added Fixes tag.
>>    - Removed it from below patch series, as it makes sense to go this 
>> independently.
>>      
>> https://lore.kernel.org/lkml/1677664555-30191-1-git-send-email-quic_mojha@quicinc.com/
>>
>> Changes in v2:
>>    - No change.
>>
>>   drivers/firmware/qcom_scm.c | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
>> index 468d4d5..3e020d1 100644
>> --- a/drivers/firmware/qcom_scm.c
>> +++ b/drivers/firmware/qcom_scm.c
>> @@ -1506,8 +1506,7 @@ static int qcom_scm_probe(struct platform_device 
>> *pdev)
>>   static void qcom_scm_shutdown(struct platform_device *pdev)
>>   {
>>       /* Clean shutdown, disable download mode to allow normal restart */
>> -    if (download_mode)
>> -        qcom_scm_set_download_mode(false);
>> +    qcom_scm_set_download_mode(false);
>>   }
>>   static const struct of_device_id qcom_scm_dt_match[] = {