Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
To:     <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
        <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
        <pabeni@redhat.com>, <netdev@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        <ramon.nordin.rodriguez@ferroamp.se>
CC:     <horatiu.vultur@microchip.com>, <Woojung.Huh@microchip.com>,
        <Nicolas.Ferre@microchip.com>, <Thorsten.Kummermehr@microchip.com>,
        "Parthiban Veerasooran" <Parthiban.Veerasooran@microchip.com>
Subject: [PATCH net-next v2 0/6] microchip_t1s: Update on Microchip 10BASE-T1S PHY driver
Date:   Mon, 22 May 2023 17:03:25 +0530
Message-ID: <20230522113331.36872-1-Parthiban.Veerasooran@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patch series contain the below updates,
- Fixes on the Microchip LAN8670/1/2 10BASE-T1S PHYs support in the
  net/phy/microchip_t1s.c driver.
- Adds support for the Microchip LAN8650/1 Rev.B0 10BASE-T1S Internal
  PHYs in the net/phy/microchip_t1s.c driver.

Changes:
v2:
- Updated cover letter contents.
- Modified driver description is more generic as it is common for all the
  Microchip 10BASE-T1S PHYs.
- Replaced read-modify-write code with phy_modify_mmd function.
- Moved */ to the same line for the single line comments.
- Changed the type int to u16 for LAN865X Rev.B0 fixup registers
  declaration.
- Changed all the comments starting letter to upper case for the
  consistency.
- Removed return value check of phy_read_mmd and returned directly in the
  last line of the function lan865x_revb0_indirect_read.
- Used reverse christmas notation wherever is possible.
- Used FIELD_PREP instead of << in all the places.
- Used 4 byte representation for all the register addresses and values
  for consistency.
- Comment for indirect read is modified.
- Implemented "Reset Complete" status polling in config_init.
- Function lan865x_setup_cfgparam is split into multiple functions for
  readability.
- Reference to AN1760 document is added in the comment.
- Removed interrupt disabling code as it is not needed.
- Provided meaningful macros for the LAN865X Rev.B0 indirect read
  registers and control.
- Replaced 0x10 with BIT(4).
- Removed collision detection disable/enable code as it can be done with
  a separate patch later.

Parthiban Veerasooran (6):
  net: phy: microchip_t1s: modify driver description to be more generic
  net: phy: microchip_t1s: replace read-modify-write code with
    phy_modify_mmd
  net: phy: microchip_t1s: update LAN867x PHY supported revision number
  net: phy: microchip_t1s: fix reset complete status handling
  net: phy: microchip_t1s: remove unnecessary interrupts disabling code
  net: phy: microchip_t1s: add support for Microchip LAN865x Rev.B0 PHYs

 drivers/net/phy/microchip_t1s.c | 265 +++++++++++++++++++++++++++-----
 1 file changed, 226 insertions(+), 39 deletions(-)

-- 
2.34.1