Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   arinc9.unal@gmail.com
To:     Sean Wang <sean.wang@mediatek.com>,
        Landen Chao <Landen.Chao@mediatek.com>,
        DENG Qingfang <dqfext@gmail.com>,
        Daniel Golle <daniel@makrotopia.org>,
        Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        Russell King <linux@armlinux.org.uk>
Cc:     =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>,
        Richard van Schagen <richard@routerhints.com>,
        Richard van Schagen <vschagen@cs.com>,
        Frank Wunderlich <frank-w@public-files.de>,
        Bartel Eerdekens <bartel.eerdekens@constell8.be>,
        erkin.bozoglu@xeront.com, mithat.guner@xeront.com,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured
Date:   Mon, 22 May 2023 15:15:10 +0300
Message-Id: <20230522121532.86610-9-arinc.unal@arinc9.com>
In-Reply-To: <20230522121532.86610-1-arinc.unal@arinc9.com>
References: <20230522121532.86610-1-arinc.unal@arinc9.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The idea of p5_interface and p6_interface pointers is to prevent
mt753x_mac_config() from running twice for MT7531, as it's already run with
mt753x_cpu_port_enable() from mt7531_setup_common(), if the port is used as
a CPU port.

Change p5_interface and p6_interface to p5_configured and p6_configured.
Make them boolean.

Do not set them for any other reason.

The priv->p5_intf_sel check is useless as in this code path, it will always
be P5_INTF_SEL_GMAC5.

There was also no need to set priv->p5_interface and priv->p6_interface to
PHY_INTERFACE_MODE_NA on mt7530_setup() and mt7531_setup() as they would
already be set to that when "priv" is allocated. The pointers were of the
phy_interface_t enumeration type, and the first element of the enum is
PHY_INTERFACE_MODE_NA. There was nothing in between that would change this
beforehand.

Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/dsa/mt7530.c | 19 ++++---------------
 drivers/net/dsa/mt7530.h | 10 ++++++----
 2 files changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 710c6622d648..d837aa20968c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2234,8 +2234,6 @@ mt7530_setup(struct dsa_switch *ds)
 	val |= MHWTRAP_MANUAL;
 	mt7530_write(priv, MT7530_MHWTRAP, val);
 
-	priv->p6_interface = PHY_INTERFACE_MODE_NA;
-
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
@@ -2455,10 +2453,6 @@ mt7531_setup(struct dsa_switch *ds)
 	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
 		   MT7531_GPIO0_INTERRUPT);
 
-	/* Let phylink decide the interface later. */
-	priv->p5_interface = PHY_INTERFACE_MODE_NA;
-	priv->p6_interface = PHY_INTERFACE_MODE_NA;
-
 	/* Enable PHY core PLL, since phy_device has not yet been created
 	 * provided for phy_[read,write]_mmd_indirect is called, we provide
 	 * our own mt7531_ind_mmd_phy_[read,write] to complete this
@@ -2728,25 +2722,20 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 			goto unsupported;
 		break;
 	case 5: /* Port 5, can be used as a CPU port. */
-		if (priv->p5_interface == state->interface)
+		if (priv->p5_configured)
 			break;
 
 		if (mt753x_mac_config(ds, port, mode, state) < 0)
 			goto unsupported;
-
-		if (priv->p5_intf_sel != P5_DISABLED)
-			priv->p5_interface = state->interface;
 		break;
 	case 6: /* Port 6, can be used as a CPU port. */
-		if (priv->p6_interface == state->interface)
+		if (priv->p6_configured)
 			break;
 
 		mt753x_pad_setup(ds, state);
 
 		if (mt753x_mac_config(ds, port, mode, state) < 0)
 			goto unsupported;
-
-		priv->p6_interface = state->interface;
 		break;
 	default:
 unsupported:
@@ -2854,12 +2843,12 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
 		else
 			interface = PHY_INTERFACE_MODE_2500BASEX;
 
-		priv->p5_interface = interface;
+		priv->p5_configured = true;
 		break;
 	case 6:
 		interface = PHY_INTERFACE_MODE_2500BASEX;
 
-		priv->p6_interface = interface;
+		priv->p6_configured = true;
 		break;
 	default:
 		return -EINVAL;
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 2602c95fd3a5..06037be5882c 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -745,8 +745,10 @@ struct mt753x_info {
  * @ports:		Holding the state among ports
  * @reg_mutex:		The lock for protecting among process accessing
  *			registers
- * @p6_interface:	Holding the current port 6 interface
- * @p5_interface:	Holding the current port 5 interface
+ * @p6_configured:	Flag for distinguishing if port 6 of the MT7531 switch
+ *			is already configured
+ * @p5_configured:	Flag for distinguishing if port 5 of the MT7531 switch
+ *			is already configured
  * @p5_intf_sel:	Holding the current port 5 interface select
  * @p5_sgmii:		Flag for distinguishing if port 5 of the MT7531 switch
  *			has got SGMII
@@ -767,8 +769,8 @@ struct mt7530_priv {
 	const struct mt753x_info *info;
 	unsigned int		id;
 	bool			mcm;
-	phy_interface_t		p6_interface;
-	phy_interface_t		p5_interface;
+	bool			p6_configured;
+	bool			p5_configured;
 	enum p5_interface_select p5_intf_sel;
 	bool			p5_sgmii;
 	u8			mirror_rx;
-- 
2.39.2