Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Zqiang <qiang.zhang1211@gmail.com>
To:     tj@kernel.org, jiangshanlai@gmail.com, naresh.kamboju@linaro.org,
        qiang.zhang1211@gmail.com
Cc:     linux-kernel@vger.kernel.org
Subject: [PATCH v3] workqueue: Fix WARN_ON_ONCE() triggers in worker_enter_idle()
Date:   Wed, 24 May 2023 11:53:39 +0800
Message-Id: <20230524035339.25185-1-qiang.zhang1211@gmail.com>
Precedence: bulk

Currently, the nr_running can be modified from timer tick, that means
the timer tick can run in not-irq-protected critical section to modify
nr_runnig, consider the following scenario:

CPU0
kworker/0:2 (events)
   worker_clr_flags(worker, WORKER_PREP | WORKER_REBOUND);
   ->pool->nr_running++;  (1)

   process_one_work()
   ->worker->current_func(work);
     ->schedule()
       ->wq_worker_sleeping()
         ->worker->sleeping = 1;
         ->pool->nr_running--;  (0)
           ....
       ->wq_worker_running()
               ....
               CPU0 by interrupt:
               wq_worker_tick()
               ->worker_set_flags(worker, WORKER_CPU_INTENSIVE);
                 ->pool->nr_running--;  (-1)
	         ->worker->flags |= WORKER_CPU_INTENSIVE;
               ....
         ->if (!(worker->flags & WORKER_NOT_RUNNING))
           ->pool->nr_running++;    (will not execute)
         ->worker->sleeping = 0;
         ....
    ->worker_clr_flags(worker, WORKER_CPU_INTENSIVE);
      ->pool->nr_running++;  (0)
    ....
    worker_set_flags(worker, WORKER_PREP);
    ->pool->nr_running--;   (-1)
    ....
    worker_enter_idle()
    ->WARN_ON_ONCE(pool->nr_workers == pool->nr_idle && pool->nr_running);

if the nr_workers is equal to nr_idle, due to the nr_running is not zero,
will trigger WARN_ON_ONCE().

[    2.460602] WARNING: CPU: 0 PID: 63 at kernel/workqueue.c:1999 worker_enter_idle+0xb2/0xc0
[    2.462163] Modules linked in:
[    2.463401] CPU: 0 PID: 63 Comm: kworker/0:2 Not tainted 6.4.0-rc2-next-20230519 #1
[    2.463771] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
[    2.465127] Workqueue:  0x0 (events)
[    2.465678] RIP: 0010:worker_enter_idle+0xb2/0xc0
...
[    2.472614] Call Trace:
[    2.473152]  <TASK>
[    2.474182]  worker_thread+0x71/0x430
[    2.474992]  ? _raw_spin_unlock_irqrestore+0x28/0x50
[    2.475263]  kthread+0x103/0x120
[    2.475493]  ? __pfx_worker_thread+0x10/0x10
[    2.476355]  ? __pfx_kthread+0x10/0x10
[    2.476635]  ret_from_fork+0x2c/0x50
[    2.477051]  </TASK>

This commit therefore add the check of worker->sleeping in wq_worker_tick(),
if the worker->sleeping is not zero, directly return.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230519/testrun/17078554/suite/boot/test/clang-nightly-lkftconfig/log
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
---
 kernel/workqueue.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 9c5c1cfa478f..a028b851333e 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1051,7 +1051,7 @@ void wq_worker_running(struct task_struct *task)
 {
 	struct worker *worker = kthread_data(task);
 
-	if (!worker->sleeping)
+	if (!READ_ONCE(worker->sleeping))
 		return;
 
 	/*
@@ -1071,7 +1071,7 @@ void wq_worker_running(struct task_struct *task)
 	 */
 	worker->current_at = worker->task->se.sum_exec_runtime;
 
-	worker->sleeping = 0;
+	WRITE_ONCE(worker->sleeping, 0);
 }
 
 /**
@@ -1097,10 +1097,10 @@ void wq_worker_sleeping(struct task_struct *task)
 	pool = worker->pool;
 
 	/* Return if preempted before wq_worker_running() was reached */
-	if (worker->sleeping)
+	if (READ_ONCE(worker->sleeping))
 		return;
 
-	worker->sleeping = 1;
+	WRITE_ONCE(worker->sleeping, 1);
 	raw_spin_lock_irq(&pool->lock);
 
 	/*
@@ -1143,8 +1143,13 @@ void wq_worker_tick(struct task_struct *task)
 	 * If the current worker is concurrency managed and hogged the CPU for
 	 * longer than wq_cpu_intensive_thresh_us, it's automatically marked
 	 * CPU_INTENSIVE to avoid stalling other concurrency-managed work items.
+	 *
+	 * The worker->sleeping is true means that the worker doing voluntary
+	 * switch and will not hogged the CPU, or the worker is running again
+	 * but the worker->sleeping has not been reset, in the process of executing
+	 * wq_worker_running().
 	 */
-	if ((worker->flags & WORKER_NOT_RUNNING) ||
+	if ((worker->flags & WORKER_NOT_RUNNING) || READ_ONCE(worker->sleeping) ||
 	    worker->task->se.sum_exec_runtime - worker->current_at <
 	    wq_cpu_intensive_thresh_us * NSEC_PER_USEC)
 		return;
-- 
2.17.1