Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 24 May 2023 21:08:50 +0300
From:   Vladimir Oltean <olteanv@gmail.com>
To:     arinc9.unal@gmail.com
Cc:     Sean Wang <sean.wang@mediatek.com>,
        Landen Chao <Landen.Chao@mediatek.com>,
        DENG Qingfang <dqfext@gmail.com>,
        Daniel Golle <daniel@makrotopia.org>,
        Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        Russell King <linux@armlinux.org.uk>,
        =?utf-8?B?QXLEsW7DpyDDnE5BTA==?= <arinc.unal@arinc9.com>,
        Richard van Schagen <richard@routerhints.com>,
        Richard van Schagen <vschagen@cs.com>,
        Frank Wunderlich <frank-w@public-files.de>,
        Bartel Eerdekens <bartel.eerdekens@constell8.be>,
        erkin.bozoglu@xeront.com, mithat.guner@xeront.com,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org
Subject: Re: [PATCH net-next 10/30] net: dsa: mt7530: call port 6 setup from
 mt7530_mac_config()
Message-ID: <20230524180850.7zelk6x2dpiwmnw6@skbuf>
References: <20230522121532.86610-1-arinc.unal@arinc9.com>
 <20230522121532.86610-11-arinc.unal@arinc9.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20230522121532.86610-11-arinc.unal@arinc9.com>
Precedence: bulk

On Mon, May 22, 2023 at 03:15:12PM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more
> things than setting up port 6. That part was moved to more appropriate
> locations, mt7530_setup() and mt7530_pll_setup().
> 
> Now that all it does is set up port 6, rename it to mt7530_setup_port6(),
> and move it to a more appropriate location, under mt7530_mac_config().
> 
> Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function
> pointer.
> 
> This is the code path for setting up the ports before:
> 
> mt753x_phylink_mac_config()
> -> mt753x_mac_config()
>    -> mt7530_mac_config()
>       -> mt7530_setup_port5()
> -> mt753x_pad_setup()
>    -> mt7530_pad_clk_setup()
> 
> This is after:
> 
> mt753x_phylink_mac_config()
> -> mt753x_mac_config()
>    -> mt7530_mac_config()
>       -> mt7530_setup_port5()
>       -> mt7530_setup_port6()
> 
> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>