Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 25 May 2023 14:05:35 +0300 (EEST)
From:   =?ISO-8859-15?Q?Ilpo_J=E4rvinen?= <ilpo.jarvinen@linux.intel.com>
To:     Hugo Villeneuve <hugo@hugovil.com>
cc:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, Jiri Slaby <jirislaby@kernel.org>,
        jringle@gridpoint.com, tomasz.mon@camlingroup.com,
        l.perczak@camlintechnologies.com,
        linux-serial <linux-serial@vger.kernel.org>,
        devicetree@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
        linux-gpio@vger.kernel.org,
        Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: Re: [PATCH v3 04/11] serial: sc16is7xx: add post reset delay
In-Reply-To: <20230525040324.3773741-5-hugo@hugovil.com>
Message-ID: <1ae6fb11-6aa8-66e-86a-a9b5a6403f5e@linux.intel.com>
References: <20230525040324.3773741-1-hugo@hugovil.com> <20230525040324.3773741-5-hugo@hugovil.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Precedence: bulk

On Thu, 25 May 2023, Hugo Villeneuve wrote:

> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> 
> Make sure we wait at least 3us before initiating communication with
> the device after reset.
> 
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> ---
>  drivers/tty/serial/sc16is7xx.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> index a7c4da3cfd2b..af7e66db54b4 100644
> --- a/drivers/tty/serial/sc16is7xx.c
> +++ b/drivers/tty/serial/sc16is7xx.c
> @@ -1428,6 +1428,12 @@ static int sc16is7xx_probe(struct device *dev,
>  	regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT,
>  			SC16IS7XX_IOCONTROL_SRESET_BIT);
>  
> +	/*
> +	 * After reset, the host must wait at least 3us before initializing a
> +	 * communication with the device.
> +	 */
> +	usleep_range(3, 5);
> +
>  	for (i = 0; i < devtype->nr_uart; ++i) {
>  		s->p[i].line		= i;
>  		/* Initialize port data */

Does this fix a problem? You don't have a Fixes tag nor did you describe
a problem that arises if the is not there in the changelog.

-- 
 i.