Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To:     andersson@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org
Cc:     johan+linaro@kernel.org, agross@kernel.org,
        konrad.dybcio@linaro.org, mturquette@baylibre.com,
        sboyd@kernel.org, conor+dt@kernel.org,
        linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 4/6] clk: qcom: Add lpass audio clock controller driver for SC8280XP
Date:   Thu, 25 May 2023 13:29:28 +0100
Message-Id: <20230525122930.17141-5-srinivas.kandagatla@linaro.org>
In-Reply-To: <20230525122930.17141-1-srinivas.kandagatla@linaro.org>
References: <20230525122930.17141-1-srinivas.kandagatla@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add support for the lpass audio clock controller found on SC8280XP based
devices. This would allow lpass peripheral loader drivers to control the
clocks and bring the subsystems out of reset.

Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/clk/qcom/lpasscc-sc8280xp.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/clk/qcom/lpasscc-sc8280xp.c b/drivers/clk/qcom/lpasscc-sc8280xp.c
index 547f15d41a9d..60cc3c98d03d 100644
--- a/drivers/clk/qcom/lpasscc-sc8280xp.c
+++ b/drivers/clk/qcom/lpasscc-sc8280xp.c
@@ -14,6 +14,26 @@
 #include "common.h"
 #include "reset.h"
 
+static const struct qcom_reset_map lpass_audiocc_sc8280xp_resets[] = {
+	[LPASS_AUDIO_SWR_RX_CGCR] =  { 0xa0, 1 },
+	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
+	[LPASS_AUDIO_SWR_WSA2_CGCR] =  { 0xd8, 1 },
+};
+
+static struct regmap_config lpass_audiocc_sc8280xp_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.name = "lpass-audio-csr",
+	.max_register = 0x1000,
+};
+
+static const struct qcom_cc_desc lpass_audiocc_reset_sc8280xp_desc = {
+	.config = &lpass_audiocc_sc8280xp_regmap_config,
+	.resets = lpass_audiocc_sc8280xp_resets,
+	.num_resets = ARRAY_SIZE(lpass_audiocc_sc8280xp_resets),
+};
+
 static const struct qcom_reset_map lpasscc_sc8280xp_resets[] = {
 	[LPASS_AUDIO_SWR_TX_CGCR] = { 0xc010, 1 },
 };
@@ -34,6 +54,9 @@ static const struct qcom_cc_desc lpasscc_reset_sc8280xp_desc = {
 
 static const struct of_device_id lpasscc_sc8280xp_match_table[] = {
 	{
+		.compatible = "qcom,sc8280xp-lpassaudiocc",
+		.data = &lpass_audiocc_reset_sc8280xp_desc,
+	}, {
 		.compatible = "qcom,sc8280xp-lpasscc",
 		.data = &lpasscc_reset_sc8280xp_desc,
 	},
-- 
2.21.0