Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <e733829d-2314-aa6f-7e9a-053f1b074526@kernel.org>
Date:   Fri, 26 May 2023 12:03:22 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH v6 0/7] Add JH7110 USB and USB PHY driver support
Content-Language: en-US
To:     Minda Chen <minda.chen@starfivetech.com>,
        Emil Renner Berthing <emil.renner.berthing@canonical.com>,
        Conor Dooley <conor@kernel.org>, Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Pawel Laszczak <pawell@cadence.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Peter Chen <peter.chen@kernel.org>,
        Philipp Zabel <p.zabel@pengutronix.de>
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-phy@lists.infradead.org, linux-usb@vger.kernel.org,
        linux-riscv@lists.infradead.org,
        Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        Mason Huo <mason.huo@starfivetech.com>
References: <20230518112750.57924-1-minda.chen@starfivetech.com>
From:   Roger Quadros <rogerq@kernel.org>
In-Reply-To: <20230518112750.57924-1-minda.chen@starfivetech.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 18/05/2023 14:27, Minda Chen wrote:
> This patchset adds USB driver and USB PHY for the StarFive JH7110 SoC.
> USB work mode is peripheral and using USB 2.0 PHY in VisionFive 2 board.
> The patch has been tested on the VisionFive 2 board.
> 
> This patchset should be applied after the patchset [1], [2] and [3]:
> [1] https://patchwork.kernel.org/project/linux-riscv/cover/20230518101234.143748-1-xingyu.wu@starfivetech.com/
> [2] https://patchwork.kernel.org/project/linux-clk/cover/20230512022036.97987-1-xingyu.wu@starfivetech.com
> [3] https://patchwork.kernel.org/project/linux-phy/cover/20230412084540.295411-1-changhuang.liang@starfivetech.com/
> 
> This patchset is base on v6.4-rc1
> 
> patch 1 is usb phy dt-binding document.
> patch 2 is Pcie PHY dt-binding document.
> patch 3 is USB 2.0 PHY driver.
> patch 4 is PCIe PHY driver.
> patch 5 is usb dt-binding document.
> patch 6 is the wrapper module driver of Cadence USB3. USB controller IP is Cadence USB3.
> patch 7 is USB device tree configuration.
> 
> previous version
> ---
> version 1 patchset are split to different kernel organization. It is
> incorrect. But they were sent, and Emil sent comments. I think I should 
> reserve them in cover-letter. To read the change records and previous version, 
> please start with version 2. 
> 
> v1: https://patchwork.kernel.org/project/linux-usb/cover/20230306095212.25840-1-minda.chen@starfivetech.com/
> v2: https://patchwork.kernel.org/project/linux-usb/cover/20230308082800.3008-1-minda.chen@starfivetech.com/
> v3: https://patchwork.kernel.org/project/linux-usb/cover/20230315104411.73614-1-minda.chen@starfivetech.com/
> v4: https://patchwork.kernel.org/project/linux-usb/cover/20230406015216.27034-1-minda.chen@starfivetech.com/
> v5: https://patchwork.kernel.org/project/linux-usb/cover/20230420110052.3182-1-minda.chen@starfivetech.com/
> 
> changes
> v6:
>   1. (patch 3) remove the platform remove function.
>   2. (patch 4)
>      - add switch to pcie mode function.
>      - remove the redundant init/exit function.
>   3. (patch 5)
>      - dts split to wrapper layer and cdns node. The codes are
>        like v3.
>      - add cdns3 sub node dts-binding references.
>   4. (patch 6)
>      For stg-syscon iomem 0x10240000 - 0x10240010 actually is belonged
>      to usb, so USB contain its own registers. So do not merge the dts node.
>      The codes are like v3.
>      - remove the cdns3_platform_add function.
>      - remove phy ops because cdns3 contain all the phy ops.
>      - runtime suspend function just shutdown the clocks.
>   5. (patch 7)
>      - add cdns3 subnode again.
> 
> v5:
>   1. (patch 1) set correct model name and commit title.
>   2. (patch 2) change to '-item' in syscon property. change commit title.
>   3. (patch 5)
>      - change to '-item' in syscon configure.
>      - change commit title and doc title.
>   4. (patch 6)
>      - add clk and phy deinit function
>      - add clk deinit function if phy init failed.
>      - coding style changes and other format changes. 
> 
> v4:
>   1. (patch 1) split PCIe PHY dt-binding doc to patch 2.
>   2. (patch 2) PCIe PHY add stg and sys con configuration to dt-binding doc.
>   3. (patch 3)
>      - split PCIe PHY driver to patch 4.
>      - replace dr_mode to phy mode in jh7110_usb2_phy.
>   4. (patch 4) 
>      - Makefile and Kconfig sorted by alphabet sequence.
>      - Add PCIe PHY stg and syscon PHY connection configuration
>        for USB 3.0.
>   5. (patch 5)
>      - commit message changed.
>      - merge wrapper dts node and cdns3 node in example.
>      - Add interrupts, reg, phy and dr_mode in property.
>      - Add reset-name in property example.
>   6. (patch 6)
>      - For dts node is merged, Using platform_device_alloc and
>        platform_device_add to generate cadence sub device.
>      - IOMEM and IRQ resource are passed to Cadence sub device.
>      - Add PHY ops process for PHY dts setting can not be passed to
>        Cadence USB driver.
>      - remove the stg and sys USB 3.0 PHY configuration.
>      - Change the suspend clock reset and clock enable sequence.
>      - Get all reset and clock resources before enable them in 
>        cdns_clk_rst_init.
>      - commit message changed.
>   7. (patch 7)
>      - merge wrapper dts node and cdns3 node in usb dts.
>      - move the stg and sys USB 3.0 PHY confiuration to
>        PCIe PHY dts node.
>      - commit message changed.
>      - Add reset-names dts.
> 
> v3:
>   1. Add patch 1 - 4. Add USB PHY driver and dt-binding doc. 
>      USB PHY codes are moved to patch 3 and patch 4.
>   2. (patch 5)
>      - USB wrapper module dts document is moved to usb directory.
>      - Remove the 'dr_mode' and 'starfive,usb2-only' setting.
>      - Some dts format changes. dts binding check pass.
>   3. (patch 6)
>      - Remove the PHY codes. 
>      - Search 'dr_mode' and phy setting from Cadence subnode.
>   4. (patch 7)
>      - Add USB PHY dts configurion. 
>      - 'dr_mode' is moved to Cadence controller submode.
> 
> v2:
>   1. (patch 5) dt-binding changes. The document example is the same as dts config.
>   2. (patch 6) using dev_err_probe and syscon_regmap_lookup_by_phandle_args function. Some formats changes
>   3. (patch 7) dts nodes sorted by the address after @
> 
> Minda Chen (7):
>   dt-bindings: phy: Add StarFive JH7110 USB PHY
>   dt-bindings: phy: Add StarFive JH7110 PCIe PHY
>   phy: starfive: Add JH7110 USB 2.0 PHY driver
>   phy: starfive: Add JH7110 PCIE 2.0 PHY driver
>   dt-bindings: usb: Add StarFive JH7110 USB controller
>   usb: cdns3: Add StarFive JH7110 USB driver
>   riscv: dts: starfive: Add USB dts configuration for JH7110
> 
>  .../phy/starfive,jh7110-pcie-phy.yaml         |  58 +++++
>  .../bindings/phy/starfive,jh7110-usb-phy.yaml |  50 ++++
>  .../bindings/usb/starfive,jh7110-usb.yaml     | 115 ++++++++
>  MAINTAINERS                                   |  14 +
>  .../jh7110-starfive-visionfive-2.dtsi         |   5 +
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  53 ++++
>  drivers/phy/starfive/Kconfig                  |  21 ++
>  drivers/phy/starfive/Makefile                 |   2 +
>  drivers/phy/starfive/phy-jh7110-pcie.c        | 204 +++++++++++++++
>  drivers/phy/starfive/phy-jh7110-usb.c         | 150 +++++++++++
>  drivers/usb/cdns3/Kconfig                     |  11 +
>  drivers/usb/cdns3/Makefile                    |   1 +
>  drivers/usb/cdns3/cdns3-starfive.c            | 246 ++++++++++++++++++
>  13 files changed, 930 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>  create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>  create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
>  create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
> 

For this series:
Reviewed-by: Roger Quadros <rogerq@kernel.org>