Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 26 May 2023 16:09:25 +0300
From:   Vladimir Oltean <olteanv@gmail.com>
To:     arinc9.unal@gmail.com
Cc:     Sean Wang <sean.wang@mediatek.com>,
        Landen Chao <Landen.Chao@mediatek.com>,
        DENG Qingfang <dqfext@gmail.com>,
        Daniel Golle <daniel@makrotopia.org>,
        Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        Russell King <linux@armlinux.org.uk>,
        =?utf-8?B?QXLEsW7DpyDDnE5BTA==?= <arinc.unal@arinc9.com>,
        Richard van Schagen <richard@routerhints.com>,
        Richard van Schagen <vschagen@cs.com>,
        Frank Wunderlich <frank-w@public-files.de>,
        Bartel Eerdekens <bartel.eerdekens@constell8.be>,
        erkin.bozoglu@xeront.com, mithat.guner@xeront.com,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org
Subject: Re: [PATCH net-next 15/30] net: dsa: mt7530: set TRGMII RD TAP if
 trgmii is being used
Message-ID: <20230526130925.g6w3tbxunoamfmha@skbuf>
References: <20230522121532.86610-1-arinc.unal@arinc9.com>
 <20230522121532.86610-16-arinc.unal@arinc9.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20230522121532.86610-16-arinc.unal@arinc9.com>
Precedence: bulk

On Mon, May 22, 2023 at 03:15:17PM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> This code sets the Read Data (RD) TAP value to 16 for all TRGMII control
> registers.
> 
> The for loop iterates over all the TRGMII control registers, and
> mt7530_rmw() function is used to perform a read-modify-write operation on
> each register's RD_TAP field to set its value to 16.
> 
> This operation is used to tune the timing of the read data signal in
> TRGMII to match the TX signal of the link partner.
> 
> Run this if trgmii is being used. Since this code doesn't lower the
> driving, there's no apparent benefit to run this if trgmii is not being
> used.
> 
> Add a comment to explain the code.
> 
> Thanks to 趙皎宏 (Landen Chao) for pointing out what the code does.
> 
> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>