Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Shazad Hussain <quic_shazhuss@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>
CC:     <konrad.dybcio@linaro.org>,
        Shazad Hussain <quic_shazhuss@quicinc.com>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
Subject: [PATCH v1 4/5] arm64: dts: qcom: sa8775p: add uart5 and uart9 nodes
Date:   Fri, 26 May 2023 19:01:20 +0530
Message-ID: <20230526133122.16443-5-quic_shazhuss@quicinc.com>
In-Reply-To: <20230526133122.16443-1-quic_shazhuss@quicinc.com>
References: <20230526133122.16443-1-quic_shazhuss@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add remaining uart5 and uart9 nodes for UART bus present on sa8775p
SoC.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 30 +++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 5c7b838d239a..b130136acffe 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1083,6 +1083,21 @@
 				power-domains = <&rpmhpd SA8775P_CX>;
 				status = "disabled";
 			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
 		};
 
 		qupv3_id_1: geniqup@ac0000 {
@@ -1223,6 +1238,21 @@
 				status = "disabled";
 			};
 
+			uart9: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
 			i2c10: i2c@a8c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0xa8c000 0x0 0x4000>;
-- 
2.17.1