Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Mao Jinlong <quic_jinlmao@quicinc.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Suzuki K Poulose <suzuki.poulose@arm.com>,
        Mike Leach <mike.leach@linaro.org>,
        Leo Yan <leo.yan@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC:     Mao Jinlong <quic_jinlmao@quicinc.com>,
        <coresight@lists.linaro.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>,
        Tingwei Zhang <quic_tingweiz@quicinc.com>,
        Yuanfang Zhang <quic_yuanfang@quicinc.com>,
        "Tao Zhang" <quic_taozha@quicinc.com>,
        Hao Zhang <quic_hazha@quicinc.com>
Subject: [PATCH v1 0/3] Add support for a streaming interface for TMC ETR
Date:   Fri, 26 May 2023 23:35:05 +0800
Message-ID: <20230526153508.6208-1-quic_jinlmao@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

This patch series is to add support for a streaming interface for
TMC ETR to allow for continuous log collection to secondary storage.
An interrupt based mechanism is used to stream out the data from the device.

QDSS_CS_QDSSCSR_ETRIRQCTRL register is used to set the IRQ byte counter
value. The value of this registers defines the number of bytes that when moved by
the ETR AXI interface. It will casues an interrupt which can be used by an
userspace program to know how much data is present in memory requiring copy to some
other location. A zero setting disables the interrupt.A one setting
means 8 bytes, two 16 bytes, etc. In other words, the value in this
register is the interrupt threshold times 8 bytes. ETR must be enabled
when use this interrupt function.

Sample:
echo 4096 > /sys/bus/coresight/devices/tmc_etr0/block_size
echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink
echo 1 > /sys/bus/coresight/devices/stm0/enabl_source

cat /dev/byte-cntr > /data/qdss_etr.bin &

The log collection will stop after disabling the ETR.

Commit link:
https://git.codelinaro.org/clo/linux-kernel/coresight/-/commits/coresight-byte-cntr-v1

Mao Jinlong (3):
  Coresight: Add driver to support for CSR
  coresight-tmc: byte-cntr: Add support for streaming interface for ETR
  dt-bindings: arm: Adds CoreSight CSR hardware definitions

 .../testing/sysfs-bus-coresight-devices-tmc   |   7 +
 .../bindings/arm/qcom,coresight-csr.yaml      |  62 ++++
 drivers/hwtracing/coresight/Kconfig           |  12 +
 drivers/hwtracing/coresight/Makefile          |   3 +-
 .../hwtracing/coresight/coresight-byte-cntr.c | 304 ++++++++++++++++++
 .../hwtracing/coresight/coresight-byte-cntr.h |  49 +++
 drivers/hwtracing/coresight/coresight-csr.c   | 168 ++++++++++
 drivers/hwtracing/coresight/coresight-csr.h   |  59 ++++
 .../hwtracing/coresight/coresight-tmc-core.c  |  66 ++++
 .../hwtracing/coresight/coresight-tmc-etr.c   |   8 +-
 drivers/hwtracing/coresight/coresight-tmc.h   |  12 +-
 11 files changed, 745 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-csr.yaml
 create mode 100644 drivers/hwtracing/coresight/coresight-byte-cntr.c
 create mode 100644 drivers/hwtracing/coresight/coresight-byte-cntr.h
 create mode 100644 drivers/hwtracing/coresight/coresight-csr.c
 create mode 100644 drivers/hwtracing/coresight/coresight-csr.h

-- 
2.17.1