Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <8bc6aaac-f28a-3ce7-8dea-f8484fd5b6c9@linaro.org>
Date:   Fri, 26 May 2023 16:43:49 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.8.0
Subject: Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints
Content-Language: en-US
To:     Stephan Gerhold <stephan@gerhold.net>,
        Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht
References: <20230510-msm8916-regulators-v1-0-54d4960a05fc@gerhold.net>
 <20230510-msm8916-regulators-v1-3-54d4960a05fc@gerhold.net>
From:   Bryan O'Donoghue <bryan.odonoghue@linaro.org>
In-Reply-To: <20230510-msm8916-regulators-v1-3-54d4960a05fc@gerhold.net>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 17/05/2023 19:48, Stephan Gerhold wrote:
> The regulator constraints for most MSM8916 devices (except DB410c) were
> originally taken from Qualcomm's msm-3.10 vendor device tree (for lack
> of better documentation). Unfortunately it turns out that Qualcomm's
> voltages are slightly off as well and do not match the voltage
> constraints applied by the RPM firmware.
> 
> This means that we sometimes request a specific voltage but the RPM
> firmware actually applies a much lower or higher voltage. This is
> particularly critical for pm8916_l11 which is used as SD card VMMC
> regulator: The SD card can choose a voltage from the current range of
> 1.8 - 2.95V. If it chooses to run at 1.8V we pretend that this is fine
> but the RPM firmware will still silently end up configuring 2.95V.
> This can be easily reproduced with a multimeter or by checking the
> SPMI hardware registers of the regulator.
> 
> Fix this by making the voltages match the actual "specified range" in
> the PM8916 Device Specification which is enforced by the RPM firmware.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
>   arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts           | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts       | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts             | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts         | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts             | 12 ++++++------
>   arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts       | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts       | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi   | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi    | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts     | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi                  | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts      | 12 ++++++------
>   13 files changed, 89 insertions(+), 89 deletions(-)

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>