Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Feedback-ID: ibe194615:Fastmail
From:   Mark Pearson <mpearson-lenovo@squebb.ca>
To:     mpearson-lenovo@squebb.ca
Cc:     hdegoede@redhat.com, markgross@kernel.org,
        platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/5] platform/x86: think-lmi: Correct NVME password handling
Date:   Fri, 26 May 2023 13:16:56 -0400
Message-Id: <20230526171658.3886-3-mpearson-lenovo@squebb.ca>
In-Reply-To: <20230526171658.3886-1-mpearson-lenovo@squebb.ca>
References: <mpearson-lenovo@squebb.ca>
 <20230526171658.3886-1-mpearson-lenovo@squebb.ca>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

NVME passwords identifier have been standardised across the Lenovo
systems and now use udrp and adrp (user and admin level) instead of
unvp and mnvp.

This should apparently be backwards compatible.

Also cleaned up so the index is set to a default of 1 rather than 0
as this just makes more sense (there is no device 0).

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
---
Changes in v2 & v3: None. Version bumped in series

 drivers/platform/x86/think-lmi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c
index c7e98fbe7c3d..1c02958035ad 100644
--- a/drivers/platform/x86/think-lmi.c
+++ b/drivers/platform/x86/think-lmi.c
@@ -456,9 +456,9 @@ static ssize_t new_password_store(struct kobject *kobj,
 				sprintf(pwd_type, "mhdp%d", setting->index);
 		} else if (setting == tlmi_priv.pwd_nvme) {
 			if (setting->level == TLMI_LEVEL_USER)
-				sprintf(pwd_type, "unvp%d", setting->index);
+				sprintf(pwd_type, "udrp%d", setting->index);
 			else
-				sprintf(pwd_type, "mnvp%d", setting->index);
+				sprintf(pwd_type, "adrp%d", setting->index);
 		} else {
 			sprintf(pwd_type, "%s", setting->pwd_type);
 		}
@@ -1524,6 +1524,10 @@ static int tlmi_analyze(void)
 		if (!tlmi_priv.pwd_nvme)
 			goto fail_clear_attr;
 
+		/* Set default hdd/nvme index to 1 as there is no device 0 */
+		tlmi_priv.pwd_hdd->index = 1;
+		tlmi_priv.pwd_nvme->index = 1;
+
 		if (tlmi_priv.pwdcfg.core.password_state & TLMI_HDD_PWD) {
 			/* Check if PWD is configured and set index to first drive found */
 			if (tlmi_priv.pwdcfg.ext.hdd_user_password ||
-- 
2.40.1