Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 27 May 2023 16:39:46 +0300
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Mehdi Djait <mehdi.djait.k@gmail.com>
Cc:     jic23@kernel.org, mazziesaccount@gmail.com,
        krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
        lars@metafoo.de, linux-iio@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v4 5/7] iio: accel: kionix-kx022a: Refactor driver and
 add chip_info structure
Message-ID: <ZHIIIhtOAQRw4F40@smile.fi.intel.com>
References: <cover.1685109507.git.mehdi.djait.k@gmail.com>
 <de588a5a3ca311f6dc3a543bfa5cea7b590ae44c.1685109507.git.mehdi.djait.k@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <de588a5a3ca311f6dc3a543bfa5cea7b590ae44c.1685109507.git.mehdi.djait.k@gmail.com>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
Precedence: bulk

On Fri, May 26, 2023 at 04:30:46PM +0200, Mehdi Djait wrote:
> Add the chip_info structure to the driver's private data to hold all
> the device specific infos.
> Refactor the kx022a driver implementation to make it more generic and
> extensible.

...

> -	regmap = devm_regmap_init_i2c(i2c, &kx022a_regmap);
> +	chip_info = device_get_match_data(&i2c->dev);
> +	if (!chip_info) {
> +		const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
> +		chip_info = (const struct kx022a_chip_info *)id->driver_data;
> +	}

And if still no chip_info available?..

> +	regmap = devm_regmap_init_i2c(i2c, chip_info->regmap_config);
>  	if (IS_ERR(regmap))
>  		return dev_err_probe(dev, PTR_ERR(regmap),
>  				     "Failed to initialize Regmap\n");

...

> -	if (val > KX022A_FIFO_LENGTH)
> -		val = KX022A_FIFO_LENGTH;
> +	if (val > data->chip_info->fifo_length)
> +		val = data->chip_info->fifo_length;

min()/min_t() ?

...

> +	ret = regmap_noinc_read(data->regmap, data->chip_info->buf_read,
> +				&data->fifo_buffer[0], fifo_bytes);

data->fifo_buffer will suffice.


>  	if (ret)
>  		goto renable_out;

...

> +	data->fifo_buffer = kmalloc(data->chip_info->fifo_length *
> +				    KX022A_FIFO_SAMPLES_SIZE_BYTES, GFP_KERNEL);

> +

Redundant blank line.

> +	if (!data->fifo_buffer)
> +		return -ENOMEM;

...

> +struct kx022a_chip_info {
> +	const char *name;
> +	const struct regmap_config *regmap_config;
> +	const struct iio_chan_spec *channels;
> +	unsigned int num_channels;
> +	unsigned int fifo_length;
> +	u8 who;
> +	u8 id;
> +	u8 cntl;
> +	u8 cntl2;
> +	u8 odcntl;
> +	u8 buf_cntl1;
> +	u8 buf_cntl2;
> +	u8 buf_clear;
> +	u8 buf_status1;

Here is the gap since it's not a packed structure. Can we avoid it?

> +	u16 buf_smp_lvl_mask;
> +	u8 buf_read;
> +	u8 inc1;
> +	u8 inc4;
> +	u8 inc5;
> +	u8 inc6;
> +	u8 xout_l;
> +};

-- 
With Best Regards,
Andy Shevchenko