Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <3aeb528f-4425-4be9-091d-068e8419334e@gmail.com>
Date:   Mon, 29 May 2023 16:25:56 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.0
Subject: Re: [PATCH 2/2] arm64: dts: mt7622: handle interrupts from MT7531
 switch on BPI-R64
Content-Language: en-US, ca-ES, es-ES
To:     Daniel Golle <daniel@makrotopia.org>, devicetree@vger.kernel.org,
        linux-mediatek@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
References: <ZEA-DV_OsmFg5egL@makrotopia.org>
From:   Matthias Brugger <matthias.bgg@gmail.com>
In-Reply-To: <ZEA-DV_OsmFg5egL@makrotopia.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 19/04/2023 21:16, Daniel Golle wrote:
> Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support")
> the mt7530 driver can act as an interrupt controller. Wire up irq line
> of the MT7531 switch on the BananaPi BPi-R64 board, so the status of
> the PHYs of the five 1000Base-T ports doesn't need to be polled any
> more.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Applied, thanks

> ---
>   arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> index d583e816684cf..aabd104b12acf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -150,6 +150,10 @@ mdio: mdio-bus {
>   		switch@0 {
>   			compatible = "mediatek,mt7531";
>   			reg = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			interrupt-parent = <&pio>;
> +			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
>   			reset-gpios = <&pio 54 0>;
>   
>   			ports {