Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754997AbXJLDGF (ORCPT ); Thu, 11 Oct 2007 23:06:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756048AbXJLDFP (ORCPT ); Thu, 11 Oct 2007 23:05:15 -0400 Received: from nwd2mail10.analog.com ([137.71.25.55]:38749 "EHLO nwd2mail10.analog.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755815AbXJLDFL (ORCPT ); Thu, 11 Oct 2007 23:05:11 -0400 X-IronPort-AV: i="4.21,263,1188792000"; d="scan'208"; a="53831996:sNHT35845817" From: Bryan Wu To: david-b@pacbell.net, spi-devel-general@lists.sourceforge.net, linux-kernel@vger.kernel.org, akpm@linux-foundation.org Cc: Bryan Wu , Michael Hennerich Subject: [PATCH 03/10] Blackfin SPI driver: add error handing Date: Fri, 12 Oct 2007 11:04:57 +0800 Message-Id: <1192158304-8277-4-git-send-email-bryan.wu@analog.com> X-Mailer: git-send-email 1.5.3.4 In-Reply-To: <1192158304-8277-1-git-send-email-bryan.wu@analog.com> References: <1192158304-8277-1-git-send-email-bryan.wu@analog.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9105 Lines: 325 - add error handling in SPI bus driver with selecting clients - use proper defines to access Blackfin MMRs - remove useless SSYNCs Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- drivers/spi/spi_bfin5xx.c | 107 +++++++++++++++++++-------------------------- 1 files changed, 45 insertions(+), 62 deletions(-) diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 8041b89..2f46283 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -59,10 +59,9 @@ MODULE_LICENSE("GPL"); #define DEFINE_SPI_REG(reg, off) \ static inline u16 read_##reg(void) \ - { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \ + { return bfin_read16(SPI0_REGBASE + off); } \ static inline void write_##reg(u16 v) \ - {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\ - SSYNC();} + {bfin_write16(SPI0_REGBASE + off, v); } DEFINE_SPI_REG(CTRL, 0x00) DEFINE_SPI_REG(FLAG, 0x04) @@ -145,7 +144,6 @@ static void bfin_spi_enable(struct driver_data *drv_data) cr = read_CTRL(); write_CTRL(cr | BIT_CTL_ENABLE); - SSYNC(); } static void bfin_spi_disable(struct driver_data *drv_data) @@ -154,7 +152,6 @@ static void bfin_spi_disable(struct driver_data *drv_data) cr = read_CTRL(); write_CTRL(cr & (~BIT_CTL_ENABLE)); - SSYNC(); } /* Caculate the SPI_BAUD register value based on input HZ */ @@ -182,52 +179,44 @@ static int flush(struct driver_data *drv_data) return limit; } +#define MAX_SPI0_SSEL 7 + /* stop controller and re-config current chip*/ -static void restore_state(struct driver_data *drv_data) +static int restore_state(struct driver_data *drv_data) { struct chip_data *chip = drv_data->cur_chip; + int ret = 0; + u16 ssel[MAX_SPI0_SSEL] = {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3, + P_SPI0_SSEL4, P_SPI0_SSEL5, + P_SPI0_SSEL6, P_SPI0_SSEL7,}; /* Clear status and disable clock */ write_STAT(BIT_STAT_CLR); bfin_spi_disable(drv_data); dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); + /* Load the registers */ + write_CTRL(chip->ctl_reg); + write_BAUD(chip->baud); + write_FLAG(chip->flag); + if (!chip->chip_select_requested) { + int i = chip->chip_select_num; - dev_dbg(&drv_data->pdev->dev, - "chip select number is %d\n", chip->chip_select_num); - - switch (chip->chip_select_num) { - case 1: - peripheral_request(P_SPI0_SSEL1, DRV_NAME); - break; - case 2: - peripheral_request(P_SPI0_SSEL2, DRV_NAME); - break; - case 3: - peripheral_request(P_SPI0_SSEL3, DRV_NAME); - break; - case 4: - peripheral_request(P_SPI0_SSEL4, DRV_NAME); - break; - case 5: - peripheral_request(P_SPI0_SSEL5, DRV_NAME); - break; - case 6: - peripheral_request(P_SPI0_SSEL6, DRV_NAME); - break; - case 7: - peripheral_request(P_SPI0_SSEL7, DRV_NAME); - break; - } + dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i); + + if ((i > 0) && (i <= MAX_SPI0_SSEL)) + ret = peripheral_request(ssel[i-1], DRV_NAME); chip->chip_select_requested = 1; } - /* Load the registers */ - write_CTRL(chip->ctl_reg); - write_BAUD(chip->baud); - write_FLAG(chip->flag); + if (ret) + dev_dbg(&drv_data->pdev->dev, + ": request chip select number %d failed\n", + chip->chip_select_num); + + return ret; } /* used to kick off transfer in rx mode */ @@ -285,7 +274,6 @@ static void u8_cs_chg_writer(struct driver_data *drv_data) while (drv_data->tx < drv_data->tx_end) { write_FLAG(chip->flag); - SSYNC(); write_TDBR(*(u8 *) (drv_data->tx)); while (read_STAT() & BIT_STAT_TXS) @@ -293,13 +281,13 @@ static void u8_cs_chg_writer(struct driver_data *drv_data) while (!(read_STAT() & BIT_STAT_SPIF)) continue; write_FLAG(0xFF00 | chip->flag); - SSYNC(); + if (chip->cs_chg_udelay) udelay(chip->cs_chg_udelay); ++drv_data->tx; } write_FLAG(0xFF00); - SSYNC(); + } static void u8_reader(struct driver_data *drv_data) @@ -331,7 +319,6 @@ static void u8_cs_chg_reader(struct driver_data *drv_data) while (drv_data->rx < drv_data->rx_end) { write_FLAG(chip->flag); - SSYNC(); read_RDBR(); /* kick off */ while (!(read_STAT() & BIT_STAT_RXS)) @@ -340,13 +327,13 @@ static void u8_cs_chg_reader(struct driver_data *drv_data) continue; *(u8 *) (drv_data->rx) = read_SHAW(); write_FLAG(0xFF00 | chip->flag); - SSYNC(); + if (chip->cs_chg_udelay) udelay(chip->cs_chg_udelay); ++drv_data->rx; } write_FLAG(0xFF00); - SSYNC(); + } static void u8_duplex(struct driver_data *drv_data) @@ -370,7 +357,7 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data) while (drv_data->rx < drv_data->rx_end) { write_FLAG(chip->flag); - SSYNC(); + write_TDBR(*(u8 *) (drv_data->tx)); while (!(read_STAT() & BIT_STAT_SPIF)) @@ -379,14 +366,14 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data) continue; *(u8 *) (drv_data->rx) = read_RDBR(); write_FLAG(0xFF00 | chip->flag); - SSYNC(); + if (chip->cs_chg_udelay) udelay(chip->cs_chg_udelay); ++drv_data->rx; ++drv_data->tx; } write_FLAG(0xFF00); - SSYNC(); + } static void u16_writer(struct driver_data *drv_data) @@ -412,7 +399,6 @@ static void u16_cs_chg_writer(struct driver_data *drv_data) while (drv_data->tx < drv_data->tx_end) { write_FLAG(chip->flag); - SSYNC(); write_TDBR(*(u16 *) (drv_data->tx)); while ((read_STAT() & BIT_STAT_TXS)) @@ -420,13 +406,12 @@ static void u16_cs_chg_writer(struct driver_data *drv_data) while (!(read_STAT() & BIT_STAT_SPIF)) continue; write_FLAG(0xFF00 | chip->flag); - SSYNC(); + if (chip->cs_chg_udelay) udelay(chip->cs_chg_udelay); drv_data->tx += 2; } write_FLAG(0xFF00); - SSYNC(); } static void u16_reader(struct driver_data *drv_data) @@ -454,7 +439,6 @@ static void u16_cs_chg_reader(struct driver_data *drv_data) while (drv_data->rx < drv_data->rx_end) { write_FLAG(chip->flag); - SSYNC(); read_RDBR(); /* kick off */ while (!(read_STAT() & BIT_STAT_RXS)) @@ -463,13 +447,12 @@ static void u16_cs_chg_reader(struct driver_data *drv_data) continue; *(u16 *) (drv_data->rx) = read_SHAW(); write_FLAG(0xFF00 | chip->flag); - SSYNC(); + if (chip->cs_chg_udelay) udelay(chip->cs_chg_udelay); drv_data->rx += 2; } write_FLAG(0xFF00); - SSYNC(); } static void u16_duplex(struct driver_data *drv_data) @@ -493,7 +476,6 @@ static void u16_cs_chg_duplex(struct driver_data *drv_data) while (drv_data->tx < drv_data->tx_end) { write_FLAG(chip->flag); - SSYNC(); write_TDBR(*(u16 *) (drv_data->tx)); while (!(read_STAT() & BIT_STAT_SPIF)) @@ -502,14 +484,13 @@ static void u16_cs_chg_duplex(struct driver_data *drv_data) continue; *(u16 *) (drv_data->rx) = read_RDBR(); write_FLAG(0xFF00 | chip->flag); - SSYNC(); + if (chip->cs_chg_udelay) udelay(chip->cs_chg_udelay); drv_data->rx += 2; drv_data->tx += 2; } write_FLAG(0xFF00); - SSYNC(); } /* test if ther is more transfer to be done */ @@ -811,7 +792,6 @@ static void pump_transfers(unsigned long data) "IO duplex: cr is 0x%x\n", cr); write_CTRL(cr); - SSYNC(); drv_data->duplex(drv_data); @@ -826,7 +806,6 @@ static void pump_transfers(unsigned long data) "IO write: cr is 0x%x\n", cr); write_CTRL(cr); - SSYNC(); drv_data->write(drv_data); @@ -841,7 +820,6 @@ static void pump_transfers(unsigned long data) "IO read: cr is 0x%x\n", cr); write_CTRL(cr); - SSYNC(); drv_data->read(drv_data); if (drv_data->rx != drv_data->rx_end) @@ -890,6 +868,14 @@ static void pump_messages(struct work_struct *work) /* Extract head of queue */ drv_data->cur_msg = list_entry(drv_data->queue.next, struct spi_message, queue); + + /* Setup the SSP using the per chip configuration */ + drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); + if (restore_state(drv_data)) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + }; + list_del_init(&drv_data->cur_msg->queue); /* Initial message state */ @@ -897,13 +883,10 @@ static void pump_messages(struct work_struct *work) drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, struct spi_transfer, transfer_list); - /* Setup the SSP using the per chip configuration */ - drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - restore_state(drv_data); dev_dbg(&drv_data->pdev->dev, "got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n", - drv_data->cur_chip->baud, drv_data->cur_chip->flag, - drv_data->cur_chip->ctl_reg); + drv_data->cur_chip->baud, drv_data->cur_chip->flag, + drv_data->cur_chip->ctl_reg); dev_dbg(&drv_data->pdev->dev, "the first transfer len is %d\n", -- 1.5.3.4 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/