Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <255ecc1c-d97a-71ad-62b4-de71fd44292f@linaro.org>
Date:   Tue, 30 May 2023 01:17:13 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH RFC 03/10] drm/panel: Add LGD panel driver for Sony Xperia
 XZ3
Content-Language: en-GB
To:     Marijn Suijten <marijn.suijten@somainline.org>
Cc:     Neil Armstrong <neil.armstrong@linaro.org>,
        Sam Ravnborg <sam@ravnborg.org>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        Caleb Connolly <caleb@connolly.tech>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        ~postmarketos/upstreaming@lists.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Martin Botka <martin.botka@somainline.org>,
        Jami Kettunen <jami.kettunen@somainline.org>,
        dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        Abhinav Kumar <quic_abhinavk@quicinc.com>,
        Kuogee Hsieh <quic_khsieh@quicinc.com>,
        Jessica Zhang <quic_jesszhan@quicinc.com>
References: <20230521-drm-panels-sony-v1-0-541c341d6bee@somainline.org>
 <20230521-drm-panels-sony-v1-3-541c341d6bee@somainline.org>
 <ccc97880-8e74-b85b-9679-9c12c44c4b99@linaro.org>
 <brmrqeajbq3oyp3jjwmc6tuhiftz764u6az444xw6g7pwf5fr3@5tlp375qwhed>
From:   Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In-Reply-To: <brmrqeajbq3oyp3jjwmc6tuhiftz764u6az444xw6g7pwf5fr3@5tlp375qwhed>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 30/05/2023 00:11, Marijn Suijten wrote:
> On 2023-05-22 04:16:20, Dmitry Baryshkov wrote:
> <snip>
>>> +	if (ctx->dsi->dsc) {
>>
>> dsi->dsc is always set, thus this condition can be dropped.
> 
> I want to leave room for possibly running the panel without DSC (at a
> lower resolution/refresh rate, or at higher power consumption if there
> is enough BW) by not assigning the pointer, if we get access to panel
> documentation: probably one of the magic commands sent in this driver
> controls it but we don't know which.
> 
>>> +		drm_dsc_pps_payload_pack(&pps, ctx->dsi->dsc);
>>> +
>>> +		ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps);
>>> +		if (ret < 0) {
>>> +			dev_err(panel->dev, "failed to transmit PPS: %d\n", ret);
>>> +			goto fail;
>>> +		}
>>> +		ret = mipi_dsi_compression_mode(ctx->dsi, true);
>>> +		if (ret < 0) {
>>> +			dev_err(dev, "failed to enable compression mode: %d\n", ret);
>>> +			goto fail;
>>> +		}
>>> +
>>> +		msleep(28);
>>> +	}
>>> +
>>> +	ctx->prepared = true;
>>> +	return 0;
>>> +
>>> +fail:
>>> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>>> +	regulator_disable(ctx->vddio);
>>> +	return ret;
>>> +}
> <snip>
>>> +	/* This panel only supports DSC; unconditionally enable it */
> 
> On that note I should perhaps reword this.
> 
>>> +	dsi->dsc = dsc = devm_kzalloc(&dsi->dev, sizeof(*dsc), GFP_KERNEL);
>>
>> I think double assignments are frowned upon.
> 
> Ack.
> 
>>
>>> +	if (!dsc)
>>> +		return -ENOMEM;
>>> +
>>> +	dsc->dsc_version_major = 1;
>>> +	dsc->dsc_version_minor = 1;
>>> +
>>> +	dsc->slice_height = 32;
>>> +	dsc->slice_count = 2;
>>> +	// TODO: Get hdisplay from the mode
>>
>> Would you like to fix the TODO?
> 
> I can't unless either migrating to drm_bridge (is that doable?) or
> expand drm_panel.  That's a larger task, but I don't think this driver
> is the right place to track that desire.  Should I drop the comment
> entirely or reword it?

I'd say, reword it, so that it becomes more obvious why this TODO can 
not be fixed at this moment.

> 
>>> +	WARN_ON(1440 % dsc->slice_count);
>>> +	dsc->slice_width = 1440 / dsc->slice_count;
> 
> <snip>
> 
> - Marijn

-- 
With best wishes
Dmitry