Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Stephan Gerhold <stephan@gerhold.net>
Date:   Tue, 30 May 2023 09:15:24 +0200
Subject: [PATCH 3/6] arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK
 pinctrl
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20230529-msm8916-pinctrl-v1-3-11f540b51c93@gerhold.net>
References: <20230529-msm8916-pinctrl-v1-0-11f540b51c93@gerhold.net>
In-Reply-To: <20230529-msm8916-pinctrl-v1-0-11f540b51c93@gerhold.net>
To:     Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>
Precedence: bulk

GPIO116 is not connected (NC) on DB410c so there is no need to route
MCLK there. The MSM8916 digital codec receives the MCLK internally
without leaving the SoC through a GPIO.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 23e3b86186ac..dad7586712da 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -385,8 +385,8 @@ &sdhc_2 {
 &sound {
 	status = "okay";
 
-	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
-	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act>;
+	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus>;
 	pinctrl-names = "default", "sleep";
 	model = "DB410c";
 	audio-routing =

-- 
2.40.1