Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760340AbXJLHjB (ORCPT ); Fri, 12 Oct 2007 03:39:01 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757139AbXJLHix (ORCPT ); Fri, 12 Oct 2007 03:38:53 -0400 Received: from nwd2mail10.analog.com ([137.71.25.55]:45235 "EHLO nwd2mail10.analog.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757093AbXJLHiw (ORCPT ); Fri, 12 Oct 2007 03:38:52 -0400 X-IronPort-AV: i="4.21,264,1188792000"; d="scan'208"; a="53842992:sNHT41359269" Subject: [PATCH try #2] Input/Joystick Driver: add support AD7142 joystick driver From: Bryan Wu Reply-To: bryan.wu@analog.com To: dmitry.torokhov@gmail.com, linux-input@atrey.karlin.mff.cuni.cz, linux-joystick@atrey.karlin.mff.cuni.cz, linux-kernel@vger.kernel.org, akpm@linux-foundation.org Content-Type: text/plain Content-Transfer-Encoding: 7bit Organization: Analog Devices, Ltd. Date: Fri, 12 Oct 2007 15:38:47 +0800 Message-Id: <1192174727.6247.20.camel@roc-laptop> Mime-Version: 1.0 X-Mailer: Evolution 2.10.1 X-OriginalArrivalTime: 12 Oct 2007 07:38:49.0974 (UTC) FILETIME=[EE25A960:01C80CA2] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15537 Lines: 553 Subject: [PATCH try #2] Input/Joystick Driver: add support AD7142 joystick driver [try #2] Changelog: - Coding style issues fixed, passed checkpatch.pl - Kill uselss "ad7142_used" - Move request_irq to probe - Move i2c_check_functionality to probe - Error handling added Signed-off-by: Bryan Wu --- drivers/input/joystick/Kconfig | 16 ++ drivers/input/joystick/Makefile | 1 + drivers/input/joystick/ad7142.c | 485 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 502 insertions(+), 0 deletions(-) create mode 100644 drivers/input/joystick/ad7142.c diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 7c662ee..aeb7cc9 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -282,4 +282,20 @@ config JOYSTICK_XPAD_LEDS This option enables support for the LED which surrounds the Big X on XBox 360 controller. +config JOYSTICK_AD7142 + tristate "Analog Devices AD7142 Joystick support" + depends on BFIN && I2C + help + Say Y here if you want to support an AD7142 joystick + + + config BFIN_JOYSTICK_IRQ_PFX + int "GPIO for Interrupt" + depends on (BFIN && JOYSTICK_AD7142) + range 33 120 + default "55" if BFIN537_STAMP + default "39" if BFIN533_STAMP + help + Choose an GPIO as Keypad interrupt.[0..15] + endif diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index e855abb..8df388f 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_JOYSTICK_A3D) += a3d.o +obj-$(CONFIG_JOYSTICK_AD7142) += ad7142.o obj-$(CONFIG_JOYSTICK_ADI) += adi.o obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o diff --git a/drivers/input/joystick/ad7142.c b/drivers/input/joystick/ad7142.c new file mode 100644 index 0000000..c31e639 --- /dev/null +++ b/drivers/input/joystick/ad7142.c @@ -0,0 +1,485 @@ +/* + * File: drivers/input/joystick/ad7142.c + * Based on: drivers/input/joystick/amijoy.c + * Original Author: Aubrey Li + * Maintained by: Bryan Wu + * + * Created: Apr 7th, 2006 + * Description: + * + * Modified: + * Copyright 2005-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +MODULE_AUTHOR("Aubrey Li, Bryan Wu "); +MODULE_DESCRIPTION("Driver for AD7142 joysticks"); +MODULE_LICENSE("GPL"); + +/* + * Feeding the output queue to the device is handled by way of a + * workqueue. + */ +static struct task_struct *ad7142_task; +static DECLARE_WAIT_QUEUE_HEAD(ad7142_wait); + +static struct input_dev *ad7142_dev; + +#define AD7142_DRV_NAME "ad7142_js" +#define AD7142_I2C_ID 0xE622 +#define AD7142_I2C_ADDR 0x2C +/* + * Ram map - these registers are defined as we go along + */ +/* RW Power & conversion control */ +#define PWRCONVCTL 0x00 + +/* RW Ambient compensation control register 0 - 3 */ +#define AMBCOMPCTL_REG0 0x01 +#define AMBCOMPCTL_REG1 0x02 +#define AMBCOMPCTL_REG2 0x03 +#define AMBCOMPCTL_REG3 0x04 + +/* RW Interrupt enable register 0 - 2 */ +#define INTEN_REG0 0x05 +#define INTEN_REG1 0x06 +#define INTEN_REG2 0x07 + +/* R Low limit interrupt status register 0 */ +#define INTSTAT_REG0 0x08 +/* R High limit interrupt status register 1 */ +#define INTSTAT_REG1 0x09 +/* R Interrupt status register 2 */ +#define INTSTAT_REG2 0x0A + +/* R ADC stage 0 - 11 result (uncompensated) actually located in SRAM */ +#define ADCRESULT_S0 0x0B +#define ADCRESULT_S1 0x0C +#define ADCRESULT_S2 0x0D +#define ADCRESULT_S3 0x0E +#define ADCRESULT_S4 0x0F +#define ADCRESULT_S5 0x10 +#define ADCRESULT_S6 0x11 +#define ADCRESULT_S7 0x12 +#define ADCRESULT_S8 0x13 +#define ADCRESULT_S9 0x14 +#define ADCRESULT_S10 0x15 +#define ADCRESULT_S11 0x16 + +/* R I.D. Register */ +#define DEVID 0x17 + +/* R Current threshold status register 0, 1 */ +#define THRES_STAT_REG0 0x40 +#define THRES_STAT_REG1 0x41 +/* R Current proximity status register 2 */ +#define PROX_STAT_REG 0x42 + +#define STAGE0_CONNECTION 0x80 +#define STAGE1_CONNECTION 0x88 +#define STAGE2_CONNECTION 0x90 +#define STAGE3_CONNECTION 0x98 +#define STAGE4_CONNECTION 0xA0 +#define STAGE5_CONNECTION 0xA8 +#define STAGE6_CONNECTION 0xB0 +#define STAGE7_CONNECTION 0xB8 +#define STAGE8_CONNECTION 0xC0 +#define STAGE9_CONNECTION 0xC8 +#define STAGE10_CONNECTION 0xD0 +#define STAGE11_CONNECTION 0xD8 + +/* + * STAGE0: Button1 <----> CIN6(+) Button2 <----> CIN5(-) + * STAGE1: Button3 <----> CIN4(-) Button4 <----> CIN3(+) + * STAGE2: Axes.Left <----> CIN11(-) Axes.Right <----> CIN13(+) + * STAGE3: Axes.Up <----> CIN12(-) Axes.Down <----> CIN10(+) + */ +static unsigned short stage[5][8] = { + {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, +}; + +static struct i2c_driver ad7142_driver; +static struct i2c_client *ad7142_client; + +static unsigned short ignore[] = { I2C_CLIENT_END }; +static unsigned short normal_addr[] = { AD7142_I2C_ADDR, I2C_CLIENT_END }; + +static int intr_flag; + +static struct i2c_client_address_data addr_data = { + .normal_i2c = normal_addr, + .probe = ignore, + .ignore = ignore, +}; + +static irqreturn_t ad7142_interrupt(int irq, void *dummy) +{ + disable_irq(CONFIG_BFIN_JOYSTICK_IRQ_PFX); + intr_flag = 1; + wake_up_interruptible(&ad7142_wait); + return IRQ_HANDLED; +} + +static int +ad7142_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct i2c_client *client; + int rc; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!client) + return -ENOMEM; + memset(client, 0, sizeof(struct i2c_client)); + strncpy(client->name, AD7142_DRV_NAME, I2C_NAME_SIZE); + client->addr = addr; + client->adapter = adap; + client->driver = &ad7142_driver; + + rc = i2c_attach_client(client); + if (rc) { + printk(KERN_ERR "i2c_attach_client fail: %d\n", rc); + goto fail_attach; + } + + /* + * The ADV7142 has an autoincrement function, + * use it if the adapter understands raw I2C + */ + rc = i2c_check_functionality(client->adapter, I2C_FUNC_I2C); + if (!rc) { + printk(KERN_ERR + "AD7142: i2c bus doesn't support raw I2C operation\n"); + rc = -EINVAL; + goto fail_check; + } + + rc = request_irq(CONFIG_BFIN_JOYSTICK_IRQ_PFX, ad7142_interrupt, + IRQF_TRIGGER_LOW, "ad7142_joy", ad7142_interrupt); + if (rc) { + printk(KERN_ERR "AD7142: Can't allocate irq %d\n", + CONFIG_BFIN_JOYSTICK_IRQ_PFX); + rc = -EBUSY; + goto fail_check; + } + + ad7142_client = client; + printk(KERN_INFO "%s_attach: at 0x%02x\n", + client->name, client->addr << 1); + return 0; + +fail_check: + i2c_detach_client(client); +fail_attach: + kfree(client); + return rc; +} + +static int ad7142_i2c_write(struct i2c_client *client, unsigned short offset, + unsigned short *data, unsigned int len) +{ + int ret = -1; + int i; + u8 block_data[34]; + + if (len < 1 || len > 16) { + printk(KERN_ERR "AD7142: Write data length error\n"); + return ret; + } + + /* Do raw I2C, not smbus compatible */ + block_data[0] = (offset & 0xFF00) >> 8; + block_data[1] = (offset & 0x00FF); + + for (i = 0; i < len; i++) { + block_data[2 * i + 2] = (*data & 0xFF00) >> 8; + block_data[2 * i + 3] = *data++ & 0x00FF; + } + + ret = i2c_master_send(client, block_data, (len * 2 + 2)); + if (ret < 0) { + printk(KERN_ERR "AD7142: I2C write error\n"); + return ret; + } + + return ret; +} + +static int ad7142_i2c_read(struct i2c_client *client, unsigned short offset, + unsigned short *data, unsigned int len) +{ + int ret = -1; + int i; + u8 block_data[32]; + + if (len < 1 && len > 16) { + printk(KERN_ERR "AD7142: read data length error\n"); + return ret; + } + + /* Do raw I2C, not smbus compatible */ + block_data[0] = (offset & 0xFF00) >> 8; + block_data[1] = (offset & 0x00FF); + + ret = i2c_master_send(client, block_data, 2); + if (ret < 0) { + printk(KERN_ERR "AD7142: I2C read error\n"); + return ret; + } + + ret = i2c_master_recv(client, block_data, len * 2); + if (ret < 0) { + printk(KERN_ERR "AD7142: I2C transfer error\n"); + return ret; + } + + for (i = 0; i < len; i++) { + unsigned short temp; + temp = block_data[2 * i]; + temp = (temp << 8) & 0xFF00; + *data++ = temp | block_data[2 * i + 1]; + } + + return ret; +} + +static int +ad7142_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, &ad7142_probe); +} + +static int +ad7142_detach_client(struct i2c_client *client) +{ + int rc; + + rc = i2c_detach_client(client); + if (!rc) + kfree(i2c_get_clientdata(client)); + return rc; +} + +static struct i2c_driver ad7142_driver = { + .driver = { + .name = AD7142_DRV_NAME, + }, + .id = AD7142_I2C_ID, + .attach_adapter = ad7142_attach, + .detach_client = ad7142_detach_client, +}; + +unsigned short old_status_low, old_status_high; + +static void ad7142_decode(void) +{ + unsigned short irqno_low, irqno_high; + unsigned short temp; + + ad7142_i2c_read(ad7142_client, INTSTAT_REG0, &irqno_low, 1); + temp = irqno_low ^ old_status_low; + switch (temp) { + case 0x0001: + input_report_key(ad7142_dev, BTN_BASE, (irqno_low & 0x0001)); + break; + case 0x0002: + input_report_key(ad7142_dev, BTN_BASE4, + ((irqno_low & 0x0002) >> 1)); + break; + case 0x0004: + input_report_key(ad7142_dev, KEY_UP, + ((irqno_low & 0x0004) >> 2)); + break; + case 0x0008: + input_report_key(ad7142_dev, KEY_RIGHT, + ((irqno_low & 0x0008) >> 3)); + break; + } + old_status_low = irqno_low; + + ad7142_i2c_read(ad7142_client, INTSTAT_REG1, &irqno_high, 1); + temp = irqno_high ^ old_status_high; + switch (temp) { + case 0x0001: + input_report_key(ad7142_dev, BTN_BASE2, irqno_high & 0x0001); + break; + case 0x0002: + input_report_key(ad7142_dev, BTN_BASE3, + ((irqno_high & 0x0002) >> 1)); + break; + case 0x0004: + input_report_key(ad7142_dev, KEY_DOWN, + ((irqno_high & 0x0004) >> 2)); + break; + case 0x0008: + input_report_key(ad7142_dev, KEY_LEFT, + ((irqno_high & 0x0008) >> 3)); + break; + } + old_status_high = irqno_high; + + input_sync(ad7142_dev); +} + +static int ad7142_thread(void *nothing) +{ + do { + wait_event_interruptible(ad7142_wait, + kthread_should_stop() || (intr_flag != 0)); + ad7142_decode(); + intr_flag = 0; + enable_irq(CONFIG_BFIN_JOYSTICK_IRQ_PFX); + } while (!kthread_should_stop()); + + pr_debug("ad7142: kthread exiting\n"); + + return 0; +} + +static int ad7142_open(struct input_dev *dev) +{ + unsigned short id, value; + + ad7142_i2c_read(ad7142_client, DEVID, &id, 1); + if (id != AD7142_I2C_ID) { + printk(KERN_ERR "Open AD7142 error\n"); + return -ENODEV; + } + + ad7142_i2c_write(ad7142_client, STAGE0_CONNECTION, stage[0], 8); + ad7142_i2c_write(ad7142_client, STAGE1_CONNECTION, stage[1], 8); + ad7142_i2c_write(ad7142_client, STAGE2_CONNECTION, stage[2], 8); + ad7142_i2c_write(ad7142_client, STAGE3_CONNECTION, stage[3], 8); + ad7142_i2c_write(ad7142_client, STAGE4_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE5_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE6_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE7_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE8_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE9_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE10_CONNECTION, stage[4], 8); + ad7142_i2c_write(ad7142_client, STAGE11_CONNECTION, stage[4], 8); + + value = 0x00B0; + ad7142_i2c_write(ad7142_client, PWRCONVCTL, &value, 1); + + value = 0x0690; + ad7142_i2c_write(ad7142_client, AMBCOMPCTL_REG1, &value, 1); + + value = 0x0664; + ad7142_i2c_write(ad7142_client, AMBCOMPCTL_REG2, &value, 1); + + value = 0x290F; + ad7142_i2c_write(ad7142_client, AMBCOMPCTL_REG3, &value, 1); + + value = 0x000F; + ad7142_i2c_write(ad7142_client, INTEN_REG0, &value, 1); + ad7142_i2c_write(ad7142_client, INTEN_REG1, &value, 1); + + value = 0x0000; + ad7142_i2c_write(ad7142_client, INTEN_REG2, &value, 1); + + ad7142_i2c_read(ad7142_client, AMBCOMPCTL_REG1, &value, 1); + + value = 0x000F; + ad7142_i2c_write(ad7142_client, AMBCOMPCTL_REG0, &value, 1); + + ad7142_task = kthread_run(ad7142_thread, NULL, "ad7142_task"); + if (IS_ERR(ad7142_task)) { + printk(KERN_ERR "serio: Failed to start kseriod\n"); + return PTR_ERR(ad7142_task); + } + return 0; +} + +static void ad7142_close(struct input_dev *dev) +{ + free_irq(CONFIG_BFIN_JOYSTICK_IRQ_PFX, ad7142_interrupt); + kthread_stop(ad7142_task); +} + +static int __init ad7142_init(void) +{ + int ret; + + ad7142_dev = input_allocate_device(); + if (!ad7142_dev) + return -ENOMEM; + + ad7142_dev->open = ad7142_open; + ad7142_dev->close = ad7142_close; + ad7142_dev->evbit[0] = BIT(EV_KEY); + ad7142_dev->keybit[LONG(BTN_BASE)] = BIT(BTN_BASE) | BIT(BTN_BASE2) | + BIT(BTN_BASE3) | BIT(BTN_BASE4); + ad7142_dev->keybit[LONG(KEY_UP)] |= BIT(KEY_UP) | BIT(KEY_DOWN) | + BIT(KEY_LEFT) | BIT(KEY_RIGHT); + + ad7142_dev->name = "ad7142 joystick"; + ad7142_dev->phys = "ad7142/input0"; + ad7142_dev->id.bustype = BUS_I2C; + ad7142_dev->id.vendor = 0x0001; + ad7142_dev->id.product = 0x0001; + ad7142_dev->id.version = 0x0100; + + ret = input_register_device(ad7142_dev); + if (ret) { + printk(KERN_ERR "Failed to register AD7142 input device!\n"); + goto fail_register; + } + + ret = i2c_add_driver(&ad7142_driver); + if (ret) { + printk(KERN_ERR "Failed to add AD7142 I2C driver!\n"); + goto fail_add; + } + return 0; + +fail_add: + input_unregister_device(ad7142_dev); +fail_register: + input_free_device(ad7142_dev); + return ret; +} + +static void __exit ad7142_exit(void) +{ + i2c_del_driver(&ad7142_driver); + input_unregister_device(ad7142_dev); +} + +module_init(ad7142_init); +module_exit(ad7142_exit); -- 1.5.3.4 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/