Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        NXP Linux Team <linux-imx@nxp.com>,
        Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v1 08/15] ARM: dts: imx6dl: vicut1: Address USB related warnings
Date:   Tue, 30 May 2023 14:03:38 +0200
Message-Id: <20230530120345.2874900-9-o.rempel@pengutronix.de>
In-Reply-To: <20230530120345.2874900-1-o.rempel@pengutronix.de>
References: <20230530120345.2874900-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patch addresses several USB-related warnings in the device tree for
the imx6dl vicut1 system. Specifically, it disables the unused
usbphynop1 and usbphynop2 USB PHYs, and disables unsupported
over-current detection. This action mitigates the following kernel
warnings:
usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
imx_usb 2184200.usb: No over-current polarity defined

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index ca9c20e90bcf..96e4f4b0b248 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -432,6 +432,7 @@ &usbh1 {
 	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -445,6 +446,14 @@ &usbotg {
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-- 
2.39.2