Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Victor Shih <victorshihgli@gmail.com>
To:     ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc:     linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
        benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw,
        Greg.tu@genesyslogic.com.tw,
        Victor Shih <victor.shih@genesyslogic.com.tw>
Subject: [PATCH V3 0/3] Add Genesys Logic GL9767 support
Date:   Wed, 31 May 2023 17:57:18 +0800
Message-Id: <20230531095721.392664-1-victorshihgli@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Victor Shih <victor.shih@genesyslogic.com.tw>


These patches support for the GL9767 chipset and add support SD3/SD Express
mode for the GL9767.

Changes in v3 (May. 31, 2023)
* rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
* Patch#2: use msleep() to instead mdelay().
* Patch#3: modify the if-else condition and content in
           gl9767_init_sd_express() function.
           adjust the order of definitions.

----------------- original cover letter from v2 -----------------
These patches support for the GL9767 chipset and add support SD3/SD Express
mode for the GL9767.

Changes in v2 (May. 30, 2023)
* rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
* Add set SDR104's clock to 205MHz and enable SSC for GL9767.
* drop export sdhci_check_ro() function.
* Patch#1: add gl9767_vhs_read() and gl9767_vhs_write().
* Patch#3: use mmc->ops->get_ro() to instead sdhci_check_ro().
           use msleep() to instead mdelay().
           modify the wait time for Power valid to CLKREQ.
           drop unused definitions.

----------------- original cover letter from v1 -----------------
These patches support for the GL9767 chipset and add support SD3/SD Express
mode for the GL9767.

Changes in v1 (May. 12, 2023)
* rebased to the linux-kernel-v6.4.0-rc1 in Ulf Hansson next branch.
* enable MSI interrupt for the GL9767.
* add support SDR mode for the GL9767.
* export sdhci_check_ro() function.
* add support SD Express mode for the GL9767.

Victor Shih (3):
  mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support
  mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for
    GL9767
  mmc: sdhci-pci-gli: Add support SD Express card for GL9767

 drivers/mmc/host/sdhci-pci-core.c |   1 +
 drivers/mmc/host/sdhci-pci-gli.c  | 406 ++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-pci.h      |   2 +
 3 files changed, 409 insertions(+)

-- 
2.25.1