Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <098883dd-f517-d541-de00-1a7fc0ada017@linaro.org>
Date:   Wed, 31 May 2023 22:01:32 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for
 SC8280XP
Content-Language: en-US
To:     Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        andersson@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org
Cc:     johan+linaro@kernel.org, agross@kernel.org,
        konrad.dybcio@linaro.org, mturquette@baylibre.com,
        sboyd@kernel.org, conor+dt@kernel.org,
        linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20230525122930.17141-1-srinivas.kandagatla@linaro.org>
 <20230525122930.17141-4-srinivas.kandagatla@linaro.org>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230525122930.17141-4-srinivas.kandagatla@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 25/05/2023 14:29, Srinivas Kandagatla wrote:
> Add support for the lpass clock controller found on SC8280XP based devices.
> This would allow lpass peripheral loader drivers to control the clocks and
> bring the subsystems out of reset.
> 
> Currently this patch only supports resets as the Q6DSP is in control of
> LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
> channel.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  drivers/clk/qcom/Kconfig            |  8 ++++
>  drivers/clk/qcom/Makefile           |  1 +
>  drivers/clk/qcom/lpasscc-sc8280xp.c | 63 +++++++++++++++++++++++++++++
>  3 files changed, 72 insertions(+)
>  create mode 100644 drivers/clk/qcom/lpasscc-sc8280xp.c
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 85869e7a9f16..e25993abb519 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -523,6 +523,14 @@ config SC_LPASSCC_7280
>  	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
>  	  controller to reset the LPASS subsystem.
>  
> +config SC_LPASSCC_8280XP
> +	tristate "SC8280 Low Power Audio Subsystem (LPASS) Clock Controller"

depends on ARM64 || COMPILE_TEST

Best regards,
Krzysztof