Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu,  1 Jun 2023 03:10:28 +0000
In-Reply-To: <20230601031028.544244-1-badhri@google.com>
Mime-Version: 1.0
References: <20230601031028.544244-1-badhri@google.com>
Message-ID: <20230601031028.544244-2-badhri@google.com>
Subject: [PATCH v6 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
From:   Badhri Jagan Sridharan <badhri@google.com>
To:     gregkh@linuxfoundation.org, stern@rowland.harvard.edu,
        colin.i.king@gmail.com, xuetao09@huawei.com,
        quic_eserrao@quicinc.com, water.zhangjiantao@huawei.com,
        peter.chen@freescale.com, balbi@ti.com, francesco@dolcini.it,
        alistair@alistair23.me, stephan@gerhold.net, bagasdotme@gmail.com,
        luca@z3ntu.xyz
Cc:     linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        stable@vger.kernel.org, Badhri Jagan Sridharan <badhri@google.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

usb_udc_connect_control(), soft_connect_store() and
usb_gadget_deactivate() can potentialy race against each other to invoke
usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guarding
udc->vbus, udc->started, gadget->allow_connect, gadget->deactivate with
connect_lock so that ->pullup() is only invoked when gadget driver is
bound, not deactivated and started. usb_gadget_connect_locked(),
usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(),
usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called
with this lock held.

This commit was reverted due to the crash reported in
https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
addresses the crash reported.

Cc: stable@vger.kernel.org
Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
v5 is the first version in this series.
Changes since v5:
** Fixed up commit message
** Wrapped comments at 76.
---
 drivers/usb/gadget/udc/core.c | 151 ++++++++++++++++++++++++----------
 1 file changed, 109 insertions(+), 42 deletions(-)

diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index d2e4f78c53e3..b53f74fcad60 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -40,6 +40,11 @@ static const struct bus_type gadget_bus_type;
  * @allow_connect: Indicates whether UDC is allowed to be pulled up.
  * Set/cleared by gadget_(un)bind_driver() after gadget driver is bound or
  * unbound.
+ * @connect_lock: protects udc->vbus, udc->started, gadget->connect,
+ * gadget->deactivate. usb_gadget_connect_locked,
+ * usb_gadget_disconnect_locked, usb_udc_connect_control_locked,
+ * usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with
+ * this lock held.
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -53,6 +58,7 @@ struct usb_udc {
 	bool				started;
 	bool				allow_connect;
 	struct work_struct		vbus_work;
+	struct mutex			connect_lock;
 };
 
 static struct class *udc_class;
@@ -692,17 +698,12 @@ int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
 }
 EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
 
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).
- *
- * Returns zero on success, else negative errno.
+/*
+ * Internal version of usb_gadget_connect needs to be called with
+ * connect_lock held.
  */
-int usb_gadget_connect(struct usb_gadget *gadget)
+static int usb_gadget_connect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -711,10 +712,12 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 		goto out;
 	}
 
-	if (gadget->deactivated || !gadget->udc->allow_connect) {
+	if (gadget->deactivated || !gadget->udc->allow_connect || !gadget->udc->started) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will be connected automatically after activation.
+		 *
+		 * udc first needs to be started before gadget can be pulled up.
 		 */
 		gadget->connected = true;
 		goto out;
@@ -729,22 +732,35 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_gadget_connect);
 
 /**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
  *
- * Following a successful disconnect, invoke the ->disconnect() callback
- * for the current gadget driver so that UDC drivers don't need to.
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).
  *
  * Returns zero on success, else negative errno.
  */
-int usb_gadget_disconnect(struct usb_gadget *gadget)
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+/*
+ * Internal version of usb_gadget_disconnect needs to be called with
+ * connect_lock held.
+ */
+static int usb_gadget_disconnect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -756,10 +772,12 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 	if (!gadget->connected)
 		goto out;
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->started) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will stay disconnected after activation.
+		 *
+		 * udc should have been started before gadget being pulled down.
 		 */
 		gadget->connected = false;
 		goto out;
@@ -779,6 +797,30 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 
 	return ret;
 }
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Following a successful disconnect, invoke the ->disconnect() callback
+ * for the current gadget driver so that UDC drivers don't need to.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_disconnect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
 
 /**
@@ -799,10 +841,11 @@ int usb_gadget_deactivate(struct usb_gadget *gadget)
 	if (gadget->deactivated)
 		goto out;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
+		ret = usb_gadget_disconnect_locked(gadget);
 		if (ret)
-			goto out;
+			goto unlock;
 
 		/*
 		 * If gadget was being connected before deactivation, we want
@@ -812,6 +855,8 @@ int usb_gadget_deactivate(struct usb_gadget *gadget)
 	}
 	gadget->deactivated = true;
 
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
 out:
 	trace_usb_gadget_deactivate(gadget, ret);
 
@@ -835,6 +880,7 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 	if (!gadget->deactivated)
 		goto out;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	gadget->deactivated = false;
 
 	/*
@@ -842,7 +888,8 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 	 * while it was being deactivated, we call usb_gadget_connect().
 	 */
 	if (gadget->connected)
-		ret = usb_gadget_connect(gadget);
+		ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
 
 out:
 	trace_usb_gadget_activate(gadget, ret);
@@ -1083,19 +1130,22 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 
 /* ------------------------------------------------------------------------- */
 
-static void usb_udc_connect_control(struct usb_udc *udc)
+/* Acquire connect_lock before calling this function. */
+static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
 {
 	if (udc->vbus)
-		usb_gadget_connect(udc->gadget);
+		usb_gadget_connect_locked(udc->gadget);
 	else
-		usb_gadget_disconnect(udc->gadget);
+		usb_gadget_disconnect_locked(udc->gadget);
 }
 
 static void vbus_event_work(struct work_struct *work)
 {
 	struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work);
 
-	usb_udc_connect_control(udc);
+	mutex_lock(&udc->connect_lock);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 }
 
 /**
@@ -1144,7 +1194,7 @@ void usb_gadget_udc_reset(struct usb_gadget *gadget,
 EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
 
 /**
- * usb_gadget_udc_start - tells usb device controller to start up
+ * usb_gadget_udc_start_locked - tells usb device controller to start up
  * @udc: The UDC to be started
  *
  * This call is issued by the UDC Class driver when it's about
@@ -1155,8 +1205,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
  * necessary to have it powered on.
  *
  * Returns zero on success, else negative errno.
+ *
+ * Caller should acquire connect_lock before invoking this function.
  */
-static inline int usb_gadget_udc_start(struct usb_udc *udc)
+static inline int usb_gadget_udc_start_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	int ret;
 
@@ -1173,7 +1226,7 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
 }
 
 /**
- * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * usb_gadget_udc_stop_locked - tells usb device controller we don't need it anymore
  * @udc: The UDC to be stopped
  *
  * This call is issued by the UDC Class driver after calling
@@ -1182,8 +1235,11 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
  * The details are implementation specific, but it can go as
  * far as powering off UDC completely and disable its data
  * line pullups.
+ *
+ * Caller should acquire connect lock before invoking this function.
  */
-static inline void usb_gadget_udc_stop(struct usb_udc *udc)
+static inline void usb_gadget_udc_stop_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	if (!udc->started) {
 		dev_err(&udc->dev, "UDC had already stopped\n");
@@ -1342,6 +1398,7 @@ int usb_add_gadget(struct usb_gadget *gadget)
 
 	udc->gadget = gadget;
 	gadget->udc = udc;
+	mutex_init(&udc->connect_lock);
 
 	udc->started = false;
 
@@ -1545,12 +1602,16 @@ static int gadget_bind_driver(struct device *dev)
 	if (ret)
 		goto err_bind;
 
-	ret = usb_gadget_udc_start(udc);
-	if (ret)
+	mutex_lock(&udc->connect_lock);
+	ret = usb_gadget_udc_start_locked(udc);
+	if (ret) {
+		mutex_unlock(&udc->connect_lock);
 		goto err_start;
+	}
 	usb_gadget_enable_async_callbacks(udc);
 	udc->allow_connect = true;
-	usb_udc_connect_control(udc);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
@@ -1583,12 +1644,14 @@ static void gadget_unbind_driver(struct device *dev)
 
 	udc->allow_connect = false;
 	cancel_work_sync(&udc->vbus_work);
-	usb_gadget_disconnect(gadget);
+	mutex_lock(&udc->connect_lock);
+	usb_gadget_disconnect_locked(gadget);
 	usb_gadget_disable_async_callbacks(udc);
 	if (gadget->irq)
 		synchronize_irq(gadget->irq);
 	udc->driver->unbind(gadget);
-	usb_gadget_udc_stop(udc);
+	usb_gadget_udc_stop_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	mutex_lock(&udc_lock);
 	driver->is_bound = false;
@@ -1674,11 +1737,15 @@ static ssize_t soft_connect_store(struct device *dev,
 	}
 
 	if (sysfs_streq(buf, "connect")) {
-		usb_gadget_udc_start(udc);
-		usb_gadget_connect(udc->gadget);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_udc_start_locked(udc);
+		usb_gadget_connect_locked(udc->gadget);
+		mutex_unlock(&udc->connect_lock);
 	} else if (sysfs_streq(buf, "disconnect")) {
-		usb_gadget_disconnect(udc->gadget);
-		usb_gadget_udc_stop(udc);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_disconnect_locked(udc->gadget);
+		usb_gadget_udc_stop_locked(udc);
+		mutex_unlock(&udc->connect_lock);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);
 		ret = -EINVAL;
-- 
2.41.0.rc0.172.g3f132b7071-goog