Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <91c63634-eb39-fdca-2c76-6f8182c2d47c@linaro.org>
Date:   Thu, 1 Jun 2023 19:29:08 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the
 RDP474 variant
Content-Language: en-US
To:     Kathiravan T <quic_kathirav@quicinc.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20230601042054.29075-1-quic_kathirav@quicinc.com>
 <20230601042054.29075-5-quic_kathirav@quicinc.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230601042054.29075-5-quic_kathirav@quicinc.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 01/06/2023 06:20, Kathiravan T wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
> the support for Console UART, eMMC, I2C and GPIO based buttons.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
>  2 files changed, 113 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 4f9e81253e18..0f8c763a9bd9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> new file mode 100644
> index 000000000000..085729a0fdf1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 RDP474 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "ipq5332.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
> +	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
> +
> +	aliases {
> +		serial0 = &blsp1_uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	gpio_keys {

No, srsly, so not only ignored the tags but also feedback?

Best regards,
Krzysztof