Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Hugo Villeneuve <hugo@hugovil.com>
To:     gregkh@linuxfoundation.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        jirislaby@kernel.org, jringle@gridpoint.com,
        tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com
Cc:     linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, hugo@hugovil.com,
        linux-gpio@vger.kernel.org,
        Hugo Villeneuve <hvilleneuve@dimonoff.com>,
        stable@vger.kernel.org, Lech Perczak <lech.perczak@camlingroup.com>
Date:   Thu,  1 Jun 2023 16:18:38 -0400
Message-Id: <20230601201844.3739926-4-hugo@hugovil.com>
In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com>
References: <20230601201844.3739926-1-hugo@hugovil.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: [PATCH v6 3/9] serial: sc16is7xx: refactor GPIO controller registration
Precedence: bulk

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

In preparation for upcoming patch "fix regression with GPIO
configuration". To facilitate review and make code more modular.

Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
---
 drivers/tty/serial/sc16is7xx.c | 39 ++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 0c903d44429c..7d50674d2d0e 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1349,6 +1349,26 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
 
 	return 0;
 }
+
+static int sc16is7xx_setup_gpio_chip(struct device *dev)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(dev);
+
+	if (!s->devtype->nr_gpio)
+		return 0;
+
+	s->gpio.owner		 = THIS_MODULE;
+	s->gpio.parent		 = dev;
+	s->gpio.label		 = dev_name(dev);
+	s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
+	s->gpio.get		 = sc16is7xx_gpio_get;
+	s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+	s->gpio.set		 = sc16is7xx_gpio_set;
+	s->gpio.base		 = -1;
+	s->gpio.ngpio		 = s->devtype->nr_gpio;
+	s->gpio.can_sleep	 = 1;
+	return gpiochip_add_data(&s->gpio, s);
+}
 #endif
 
 static const struct serial_rs485 sc16is7xx_rs485_supported = {
@@ -1502,22 +1522,9 @@ static int sc16is7xx_probe(struct device *dev,
 	}
 
 #ifdef CONFIG_GPIOLIB
-	if (devtype->nr_gpio) {
-		/* Setup GPIO cotroller */
-		s->gpio.owner		 = THIS_MODULE;
-		s->gpio.parent		 = dev;
-		s->gpio.label		 = dev_name(dev);
-		s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
-		s->gpio.get		 = sc16is7xx_gpio_get;
-		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
-		s->gpio.set		 = sc16is7xx_gpio_set;
-		s->gpio.base		 = -1;
-		s->gpio.ngpio		 = devtype->nr_gpio;
-		s->gpio.can_sleep	 = 1;
-		ret = gpiochip_add_data(&s->gpio, s);
-		if (ret)
-			goto out_thread;
-	}
+	ret = sc16is7xx_setup_gpio_chip(dev);
+	if (ret)
+		goto out_thread;
 #endif
 
 	/*
-- 
2.30.2