Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 2 Jun 2023 10:17:05 +0100
From:   Lee Jones <lee@kernel.org>
To:     Vladimir Barinov <v.barinov@yadro.com>
Cc:     Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux@yadro.com
Subject: Re: [PATCH v2 1/2] leds: add Awinic AW2026 LED driver
Message-ID: <20230602091705.GQ449117@google.com>
References: <20230525101341.2036563-1-v.barinov@yadro.com>
 <20230525101410.2036834-1-v.barinov@yadro.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20230525101410.2036834-1-v.barinov@yadro.com>
Precedence: bulk

On Thu, 25 May 2023, Vladimir Barinov wrote:

> This adds support for Awinic AW2026 3-channel LED driver with
> I2C insterface. It supports hardware blinking and hardware
> pattern generator.
> 
> Signed-off-by: Vladimir Barinov <v.barinov@yadro.com>
> ---
> Changes in version 2:
> - fixed typos in patch header 2016 -> 2026
> 
>  drivers/leds/Kconfig       |  10 +
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-aw2026.c | 578 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 589 insertions(+)
>  create mode 100644 drivers/leds/leds-aw2026.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index aaa9140bc351..574f3cc47d3e 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -104,6 +104,16 @@ config LEDS_AW2013
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called leds-aw2013.
>  
> +config LEDS_AW2026
> +	tristate "LED support for Awinic AW2026"
> +	depends on LEDS_CLASS && I2C && OF
> +	help
> +	  This option enables support for the AW2026 3-channel
> +	  LED driver.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called leds-aw2026.
> +
>  config LEDS_BCM6328
>  	tristate "LED Support for Broadcom BCM6328"
>  	depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index d30395d11fd8..7fb7b48329ff 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_LEDS_AN30259A)		+= leds-an30259a.o
>  obj-$(CONFIG_LEDS_APU)			+= leds-apu.o
>  obj-$(CONFIG_LEDS_ARIEL)		+= leds-ariel.o
>  obj-$(CONFIG_LEDS_AW2013)		+= leds-aw2013.o
> +obj-$(CONFIG_LEDS_AW2026)		+= leds-aw2026.o
>  obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
>  obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
>  obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
> diff --git a/drivers/leds/leds-aw2026.c b/drivers/leds/leds-aw2026.c
> new file mode 100644
> index 000000000000..7c2d5f62797c
> --- /dev/null
> +++ b/drivers/leds/leds-aw2026.c
> @@ -0,0 +1,578 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Awinic AW2026 3-channel LED driver
> + *
> + * Author: Vladimir Barinov <v.barinov@yadro.com>
> + * Copyright (C) 2023 KNS Group LLC (YADRO)
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define AW2026_MAX_LEDS		3
> +
> +/* Chip ID and Software Reset Register */
> +#define AW2026_RSTIDR		0x00
> +#define AW2026_RSTIDR_RESET	0x55
> +#define AW2026_RSTIDR_CHIP_ID	0x31
> +
> +/* Global Control Register */
> +#define AW2026_GCR		0x01
> +#define AW2026_GCR_CHIPEN	BIT(0)
> +
> +/* LED Maximum Current Register */
> +#define AW2026_IMAX		0x03
> +#define AW2026_IMAX_MASK	(BIT(0) | BIT(1))
> +
> +/* LED Configure Register */
> +#define AW2026_LCFG(x)		(0x04 + (x))
> +#define AW2026_LCFG_LEDMD	BIT(0)
> +#define AW2026_LCFG_FADE_IN	BIT(1)
> +#define AW2026_LCFG_FADE_OUT	BIT(2)
> +
> +/* LED Channel Enable Register */
> +#define AW2026_LEDEN		0x07
> +
> +/* Pattern Run/Stop Register */
> +#define AW2026_PATRUN		0x09
> +
> +/* LED Current Register */
> +#define AW2026_ILED(x)		(0x10 + (x))
> +#define AW2026_ILED_MAX		0xFF
> +
> +/* PWM duty level Register */
> +#define AW2026_PWM(x)		(0x1C + (x))
> +#define AW2026_PWM_DUTY_MAX	0xFF
> +
> +/* T1 Time Parameter of Pattern */
> +#define AW2026_PAT_T1(x)	(0x30 + 5*(x))
> +
> +/* T2 Time Parameter of Pattern */
> +#define AW2026_PAT_T2(x)	(0x31 + 5*(x))
> +
> +struct aw2026;

No forward declarations.

Please reorder the struct definitions.

> +enum aw2026_state {
> +	AW2026_STATE_OFF,
> +	AW2026_STATE_ON,
> +	AW2026_STATE_KEEP,
> +};
> +
> +struct aw2026_led {
> +	struct aw2026 *chip;
> +	struct fwnode_handle *fwnode;
> +	struct led_classdev cdev;
> +	enum aw2026_state default_state;
> +	u32 idx;
> +};
> +
> +struct aw2026 {
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +	struct mutex lock;
> +	struct regulator *vcc_regulator;
> +	struct aw2026_led leds[AW2026_MAX_LEDS];
> +	int num_leds;
> +	unsigned int imax;
> +	bool enabled;
> +};
> +
> +static const struct regmap_config aw2026_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = 0x3e,
> +};
> +
> +struct msec_reg {
> +	u32 msec;
> +	u8 reg;
> +};
> +
> +static const struct msec_reg aw2026_msec_reg[] = {
> +	{ .msec =    4, .reg = 0x0 },
> +	{ .msec =  130, .reg = 0x1 },
> +	{ .msec =  260, .reg = 0x2 },
> +	{ .msec =  380, .reg = 0x3 },
> +	{ .msec =  510, .reg = 0x4 },
> +	{ .msec =  770, .reg = 0x5 },
> +	{ .msec = 1040, .reg = 0x6 },
> +	{ .msec = 1600, .reg = 0x7 },
> +	{ .msec = 2100, .reg = 0x8 },
> +	{ .msec = 2600, .reg = 0x9 },
> +	{ .msec = 3100, .reg = 0xa },
> +	{ .msec = 4200, .reg = 0xb },
> +	{ .msec = 5200, .reg = 0xc },
> +	{ .msec = 6200, .reg = 0xd },
> +	{ .msec = 7300, .reg = 0xe },
> +	{ .msec = 8300, .reg = 0xf },
> +	{ /* sentinel */ },

We really don't need this comment.

> +};
> +
> +static int aw2026_chip_init(struct aw2026 *chip)
> +{
> +	int idx, ret;
> +
> +	ret = regmap_update_bits(chip->regmap, AW2026_GCR, AW2026_GCR_CHIPEN,
> +				 AW2026_GCR_CHIPEN);
> +	if (ret)
> +		return ret;
> +
> +	/* Max current */
> +	ret = regmap_update_bits(chip->regmap, AW2026_IMAX,
> +				 AW2026_IMAX_MASK, chip->imax);
> +	if (ret)
> +		return ret;
> +
> +	for (idx = 0; idx < chip->num_leds; idx++) {
> +		/* PWM level */

Looks obvious from the quality define naming, no?

> +		ret = regmap_write(chip->regmap, AW2026_PWM(idx), AW2026_PWM_DUTY_MAX);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static void aw2026_chip_disable(struct aw2026 *chip)
> +{
> +	int ret;
> +
> +	if (!chip->enabled)
> +		return;

What happens if we re-disable a disabled chip or re-enable an enabled
chip?  If the answer is 'nothing, the op is inert' I suggest we remove
this variable from the struct and save ourselves a bunch of lines.

> +	regmap_update_bits(chip->regmap, AW2026_GCR, AW2026_GCR_CHIPEN, 0);
> +
> +	ret = regulator_disable(chip->vcc_regulator);
> +	if (ret) {
> +		dev_err(&chip->client->dev,
> +			"Failed to disable regulator: %d\n", ret);
> +		return;
> +	}
> +
> +	chip->enabled = false;
> +}
> +
> +static int aw2026_chip_enable(struct aw2026 *chip)
> +{
> +	int ret;
> +
> +	if (chip->enabled)
> +		return 0;
> +
> +	ret = regulator_enable(chip->vcc_regulator);
> +	if (ret) {
> +		dev_err(&chip->client->dev,
> +			"Failed to enable regulator: %d\n", ret);
> +		return ret;
> +	}
> +	chip->enabled = true;
> +
> +	ret = aw2026_chip_init(chip);
> +	if (ret)
> +		aw2026_chip_disable(chip);
> +
> +	return ret;
> +}
> +
> +static bool aw2026_chip_in_use(struct aw2026 *chip)
> +{
> +	int i;
> +
> +	for (i = 0; i < chip->num_leds; i++)
> +		if (chip->leds[i].cdev.brightness)
> +			return true;
> +
> +	return false;
> +}
> +
> +static int aw2026_brightness_set(struct led_classdev *cdev,
> +				 enum led_brightness brightness)
> +{
> +	struct aw2026_led *led = container_of(cdev, struct aw2026_led, cdev);
> +	int ret, idx = led->idx;
> +
> +	mutex_lock(&led->chip->lock);
> +
> +	if (aw2026_chip_in_use(led->chip)) {
> +		ret = aw2026_chip_enable(led->chip);
> +		if (ret)
> +			goto error;
> +	}
> +
> +	if (brightness) {
> +		/* Manual mode */
> +		ret = regmap_update_bits(led->chip->regmap, AW2026_LCFG(idx),
> +					 AW2026_LCFG_LEDMD, 0);
> +		if (ret)
> +			goto error;

Nit: '\n'

> +		/* Current configure */
> +		ret = regmap_write(led->chip->regmap, AW2026_ILED(idx), brightness);
> +		if (ret)
> +			goto error;

Nit: '\n'

> +		/* Enable LED */
> +		ret = regmap_update_bits(led->chip->regmap, AW2026_LEDEN, BIT(idx), 0xFF);
> +	} else {
> +		/* Disable LED */
> +		ret = regmap_update_bits(led->chip->regmap, AW2026_LEDEN, BIT(idx), 0);
> +	}
> +	if (ret)
> +		goto error;
> +
> +	if (!aw2026_chip_in_use(led->chip))
> +		aw2026_chip_disable(led->chip);
> +
> +error:
> +	mutex_unlock(&led->chip->lock);
> +
> +	return ret;
> +}
> +
> +static int aw2026_convert_msec_to_reg(struct aw2026 *chip, u32 *msec, u8 *reg)
> +{
> +	const struct msec_reg *value;
> +	const struct msec_reg *prev_value = NULL;
> +
> +	for (value = aw2026_msec_reg; value->msec; value++) {
> +		if (value->msec >= *msec)
> +			break;
> +		prev_value = value;
> +	}
> +
> +	if (!value->msec) {
> +		dev_err(&chip->client->dev, "Unsupported msec (%u)", *msec);
> +		return -ERANGE;

"Math result not representable"

Not sure this is correct.

Would -EINVAL suit your needs better?

> +	}
> +
> +	if (prev_value && ((*msec - prev_value->msec) <= (value->msec - *msec)))

Comment this please.

> +		value = prev_value;
> +
> +	*reg = value->reg;
> +	*msec = value->msec;
> +
> +	return 0;
> +}
> +
> +static int aw2026_pattern_setup(struct aw2026_led *led, u8 trise, u8 ton, u8 tfall, u8 toff)
> +{
> +	int ret, idx = led->idx;
> +
> +	mutex_lock(&led->chip->lock);
> +
> +	if (aw2026_chip_in_use(led->chip)) {
> +		ret = aw2026_chip_enable(led->chip);
> +		if (ret)
> +			goto error;
> +	}
> +
> +	/* Pattern mode */
> +	ret = regmap_update_bits(led->chip->regmap, AW2026_LCFG(idx),
> +				 AW2026_LCFG_LEDMD, 0xFF);
> +	if (ret)
> +		goto error;

Nit: '\n'

Etc ...  you get the idea.  Throughout please.

> +	/* Current configure */
> +	ret = regmap_write(led->chip->regmap, AW2026_ILED(idx), led->cdev.brightness);
> +	if (ret)
> +		goto error;
> +	/* Rise and On time of Pattern */
> +	ret = regmap_write(led->chip->regmap, AW2026_PAT_T1(idx), (trise << 4) | ton);
> +	if (ret)
> +		goto error;
> +	/* Fall and Off time of Pattern */
> +	ret = regmap_write(led->chip->regmap, AW2026_PAT_T2(idx), (tfall << 4) | toff);
> +	if (ret)
> +		goto error;
> +	/* Pattern run for individual LED */
> +	ret = regmap_update_bits(led->chip->regmap, AW2026_PATRUN, BIT(idx), 0xFF);
> +	if (ret)
> +		goto error;
> +	/* Enable LED */
> +	ret = regmap_update_bits(led->chip->regmap, AW2026_LEDEN, BIT(idx), 0xFF);
> +
> +error:
> +	mutex_unlock(&led->chip->lock);
> +
> +	return ret;
> +}
> +
> +static int aw2026_pattern_set(struct led_classdev *cdev,
> +			      struct led_pattern *pattern,
> +			      u32 len, int repeat)
> +{
> +	struct aw2026_led *led = container_of(cdev, struct aw2026_led, cdev);
> +	struct aw2026 *chip = led->chip;
> +	int ret;
> +	u8 trise, ton, tfall, toff;
> +
> +	if (len == 1) {

Comment this section please.

> +		led->cdev.brightness = pattern[0].brightness;
> +		return aw2026_brightness_set(cdev, led->cdev.brightness);
> +	}
> +
> +	if (repeat > 0 || len != 4)
> +		return -EINVAL;
> +
> +	ret = aw2026_convert_msec_to_reg(chip, &pattern[0].delta_t, &trise);
> +	if (ret)
> +		return ret;
> +	ret = aw2026_convert_msec_to_reg(chip, &pattern[1].delta_t, &ton);
> +	if (ret)
> +		return ret;
> +	ret = aw2026_convert_msec_to_reg(chip, &pattern[2].delta_t, &tfall);
> +	if (ret)
> +		return ret;
> +	ret = aw2026_convert_msec_to_reg(chip, &pattern[3].delta_t, &toff);
> +	if (ret)
> +		return ret;
> +
> +	dev_dbg(&chip->client->dev, "pattern timings: %d %d %d %d\n",
> +		trise, ton, tfall, toff);
> +
> +	led->cdev.brightness = max(max(pattern[0].brightness, pattern[1].brightness),
> +				   max(pattern[2].brightness, pattern[3].brightness));
> +
> +	return aw2026_pattern_setup(led, trise, ton, tfall, toff);
> +}
> +
> +static int aw2026_pattern_clear(struct led_classdev *cdev)
> +{
> +	return aw2026_brightness_set(cdev, LED_OFF);
> +}
> +
> +static int aw2026_blink_set(struct led_classdev *cdev,
> +			    unsigned long *delay_on, unsigned long *delay_off)
> +{
> +	struct aw2026_led *led = container_of(cdev, struct aw2026_led, cdev);
> +	struct aw2026 *chip = led->chip;
> +	u8 ton, toff;
> +	int ret;
> +
> +	if (!*delay_on) {

Comment this please.

> +		led->cdev.brightness = LED_OFF;
> +		return aw2026_brightness_set(&led->cdev, LED_OFF);
> +	}
> +
> +	led->cdev.brightness = LED_FULL;
> +
> +	if (!*delay_off)

As above and for everything else that you think relevant.

> +		return aw2026_brightness_set(&led->cdev, LED_FULL);
> +
> +	ret = aw2026_convert_msec_to_reg(chip, (u32 *)delay_on, &ton);
> +	if (ret)
> +		return ret;
> +	ret = aw2026_convert_msec_to_reg(chip, (u32 *)delay_off, &toff);
> +	if (ret)
> +		return ret;
> +
> +	dev_dbg(&chip->client->dev, "blink timings: %d %d\n", ton, toff);
> +
> +	return aw2026_pattern_setup(led, 0, ton, 0, toff);
> +}
> +
> +static int aw2026_parse_dt(struct i2c_client *client, struct aw2026 *chip)
> +{
> +	struct device_node *np = dev_of_node(&client->dev), *child;
> +	int count, ret = 0, i = 0;
> +	struct aw2026_led *led;
> +	const char *str;
> +	u32 imax;
> +
> +	count = of_get_available_child_count(np);
> +	if (!count || count > AW2026_MAX_LEDS)
> +		return -EINVAL;
> +
> +	if (!of_property_read_u32(np, "awinic,led-max-microamp", &imax)) {
> +		chip->imax = min_t(u32, hweight32(imax / 3187 - 1), 3);

No magic numbers.  Please define them all.

> +	} else {
> +		chip->imax = 1; /* 6.375mA */
> +		dev_info(&client->dev,
> +			 "DT property led-max-microamp is missing\n");
> +	}
> +
> +	for_each_available_child_of_node(np, child) {
> +		u32 source;
> +
> +		ret = of_property_read_u32(child, "reg", &source);
> +		if (ret != 0 || source >= AW2026_MAX_LEDS) {

Nit: !ret

> +			dev_err(&chip->client->dev,
> +				"Couldn't read LED address: %d\n", ret);
> +			count--;
> +			continue;
> +		}
> +
> +		led = &chip->leds[i];
> +		led->idx = source;
> +		led->chip = chip;
> +		led->fwnode = of_fwnode_handle(child);
> +
> +		if (!of_property_read_string(child, "default-state", &str)) {
> +			if (!strcmp(str, "on"))
> +				led->default_state = AW2026_STATE_ON;
> +			else if (!strcmp(str, "keep"))
> +				led->default_state = AW2026_STATE_KEEP;
> +			else
> +				led->default_state = AW2026_STATE_OFF;
> +		}
> +
> +		i++;
> +	}
> +
> +	if (!count)
> +		return -EINVAL;
> +
> +	chip->num_leds = i;
> +
> +	return 0;
> +}
> +
> +static void aw2026_init_default_state(struct aw2026_led *led)
> +{
> +	struct aw2026 *chip = led->chip;
> +	int led_on;
> +	int ret, idx = led->idx;
> +
> +	switch (led->default_state) {
> +	case AW2026_STATE_ON:
> +		led->cdev.brightness = LED_FULL;
> +		break;
> +	case AW2026_STATE_KEEP:
> +		/* keep setup made in loader */

Please use correct grammar in comments.

"Keep"

> +		ret = regmap_read(chip->regmap, AW2026_LEDEN, &led_on);
> +		if (ret)
> +			return;
> +
> +		if (!(led_on & BIT(idx))) {
> +			led->cdev.brightness = LED_OFF;
> +			break;
> +		}
> +		regmap_read(chip->regmap, AW2026_ILED(idx),
> +			    &led->cdev.brightness);
> +		return;
> +	default:
> +		led->cdev.brightness = LED_OFF;
> +	}
> +
> +	aw2026_brightness_set(&led->cdev, led->cdev.brightness);
> +}
> +
> +static int aw2026_probe(struct i2c_client *client)
> +{
> +	struct aw2026 *chip;
> +	int i, ret;
> +	unsigned int chipid;

Nit: Please swap the last 2 lines.

> +	chip = devm_kzalloc(&client->dev, sizeof(struct aw2026), GFP_KERNEL);

sizeof(*chip)

> +	if (!chip)
> +		return -ENOMEM;
> +
> +	ret = aw2026_parse_dt(client, chip);
> +	if (ret < 0)

Can aw2026_parse_dt() return >0?

If not, just (ret).

> +		return ret;
> +
> +	mutex_init(&chip->lock);
> +	chip->client = client;
> +	i2c_set_clientdata(client, chip);
> +
> +	chip->regmap = devm_regmap_init_i2c(client, &aw2026_regmap_config);
> +	if (IS_ERR(chip->regmap)) {
> +		ret = PTR_ERR(chip->regmap);
> +		dev_err(&client->dev, "Failed to allocate register map: %d\n",
> +			ret);
> +		goto error;

Do you need to have the mutex init'ed by this point?

Might save a lot of trouble to do it as late as possible.

> +	}
> +
> +	chip->vcc_regulator = devm_regulator_get(&client->dev, "vcc");
> +	ret = PTR_ERR_OR_ZERO(chip->vcc_regulator);
> +	if (ret) {
> +		if (ret != -EPROBE_DEFER)

dev_err_probe()?

> +			dev_err(&client->dev,
> +				"Failed to request regulator: %d\n", ret);
> +		goto error;
> +	}
> +
> +	ret = regulator_enable(chip->vcc_regulator);
> +	if (ret) {
> +		dev_err(&client->dev,
> +			"Failed to enable regulator: %d\n", ret);
> +		goto error;
> +	}
> +
> +	ret = regmap_read(chip->regmap, AW2026_RSTIDR, &chipid);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to read chip ID: %d\n", ret);
> +		goto error_reg;
> +	}
> +
> +	if (chipid != AW2026_RSTIDR_CHIP_ID) {
> +		ret = -ENODEV;
> +		goto error_reg;
> +	}
> +
> +	for (i = 0; i < chip->num_leds; i++) {
> +		struct led_init_data init_data = {};
> +		struct aw2026_led *led = &chip->leds[i];
> +
> +		aw2026_init_default_state(&chip->leds[i]);
> +		led->cdev.brightness_set_blocking = aw2026_brightness_set;
> +		led->cdev.blink_set = aw2026_blink_set;
> +		led->cdev.pattern_set = aw2026_pattern_set;
> +		led->cdev.pattern_clear = aw2026_pattern_clear;
> +
> +		init_data.fwnode = chip->leds[i].fwnode;
> +
> +		ret = devm_led_classdev_register_ext(&client->dev,
> +						     &led->cdev, &init_data);
> +		if (ret < 0)
> +			goto error_reg;
> +	}
> +
> +	ret = regulator_disable(chip->vcc_regulator);
> +	if (ret) {
> +		dev_err(&client->dev,
> +			"Failed to disable regulator: %d\n", ret);
> +		goto error;
> +	}
> +
> +	return 0;
> +
> +error_reg:
> +	regulator_disable(chip->vcc_regulator);
> +error:
> +	mutex_destroy(&chip->lock);
> +	return ret;
> +}
> +
> +static void aw2026_remove(struct i2c_client *client)
> +{
> +	struct aw2026 *chip = i2c_get_clientdata(client);
> +
> +	aw2026_chip_disable(chip);
> +
> +	mutex_destroy(&chip->lock);
> +}
> +
> +static const struct of_device_id aw2026_match_table[] = {
> +	{ .compatible = "awinic,aw2026", },
> +	{ /* sentinel */ },

Remove this comment please.

> +};
> +
> +MODULE_DEVICE_TABLE(of, aw2026_match_table);
> +
> +static struct i2c_driver aw2026_driver = {
> +	.driver = {
> +		.name = "leds-aw2026",
> +		.of_match_table = of_match_ptr(aw2026_match_table),
> +	},
> +	.probe_new = aw2026_probe,
> +	.remove = aw2026_remove,
> +};
> +

Remove this line.

> +module_i2c_driver(aw2026_driver);
> +
> +MODULE_DESCRIPTION("AW2026 LED driver");
> +MODULE_AUTHOR("Vladimir Barinov");
> +MODULE_LICENSE("GPL");
> -- 
> 2.34.1
> 
> 

-- 
Lee Jones [李琼斯]