Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Nishanth Menon <nm@ti.com>
To:     Conor Dooley <conor+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Tero Kristo <kristo@kernel.org>,
        Vignesh Raghavendra <vigneshr@ti.com>
CC:     <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, Nishanth Menon <nm@ti.com>,
        Udit Kumar <u-kumar1@ti.com>, Nitin Yadav <n-yadav@ti.com>,
        Neha Malcom Francis <n-francis@ti.com>,
        Sinthu Raja <sinthu.raja@ti.com>
Subject: [PATCH 0/6] arm64: dts: ti: k3-j721s2: Mux fixups and eeprom misc
Date:   Fri, 2 Jun 2023 10:35:48 -0500
Message-ID: <20230602153554.1571128-1-nm@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Hi,

This is an expansion of Sinthu's series[1] for J721s2, fixing a few aspects
of his patches and adding uart, eeprom detection etc.

This set of changes picksup fixes seen in u-boot and else where an
consolidates into kernel as the definitive device tree description

Testing logs: https://gist.github.com/nmenon/2acfc566d0b215fe941c42317d9ac955

Changes:
* Fixups to the wkup_pmx0 patch to limit stable tree to 6.3
* Fixups to Rpi header patch for mcu_i2c0 pinmux
* Additional patches for eeprom and wkup/mcu uarts.

-- Sinthu's series history:
Changes in V5[1]:
-Remove main padconfig split patch which is not required.

Changes in V4:
- Address review comments
  * Update main and wakeup domain IO padconfig
  * Correct the pinctrl node offsets as per the newly split wkup_pmx*
    and main_pmx* nodes.

Changes in V3:
- Add Fixes tag.

Changes in V2:
- Update commit description.
- Update the offset value to 0x194 as 0x190 is the last register of the
  IO PADCONFIG register set.

V1: https://lore.kernel.org/all/20230123135831.4184-1-sinthu.raja@ti.com/
V2: https://lore.kernel.org/lkml/20230124120311.7323-1-sinthu.raja@ti.com/T/
V3: https://lore.kernel.org/linux-arm-kernel/20230316114102.3602-2-sinthu.raja@ti.com/T/
V4: https://lore.kernel.org/lkml/20230424081536.12123-1-sinthu.raja@ti.com/
V5[1]: https://lore.kernel.org/linux-arm-kernel/20230504073432.6438-1-sinthu.raja@ti.com/

Nishanth Menon (4):
  arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
  arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
  arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
  arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom

Sinthu Raja (2):
  arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
  arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header

 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 145 +++++++++++++++---
 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi    |  22 +++
 .../dts/ti/k3-j721s2-common-proc-board.dts    |  99 +++++++-----
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  29 +++-
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  22 +++
 5 files changed, 255 insertions(+), 62 deletions(-)

-- 
2.40.0