Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Paul Cercueil <paul@crapouillou.net>
To:     Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>
Cc:     "H . Nikolaus Schaller" <hns@goldelico.com>,
        linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, list@opendingux.net,
        Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 1/9] MIPS: DTS: CI20: Fix regulators
Date:   Sun,  4 Jun 2023 16:56:34 +0200
Message-Id: <20230604145642.200577-2-paul@crapouillou.net>
In-Reply-To: <20230604145642.200577-1-paul@crapouillou.net>
References: <20230604145642.200577-1-paul@crapouillou.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The regulators don't have any "reg" property, and therefore shouldn't
use an unit address in their node names. They also don't need to specify
the GPIO_ACTIVE_LOW flag, which will be ignored anyway, as they are
active-high.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 239c4537484d..e76953dce2e7 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -67,14 +67,14 @@ led-3 {
 		};
 	};
 
-	eth0_power: fixedregulator@0 {
+	eth0_power: fixedregulator-0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "eth0_power";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+		gpio = <&gpb 25 0>;
 		enable-active-high;
 	};
 
@@ -97,23 +97,23 @@ ir: ir {
 		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
 	};
 
-	wlan0_power: fixedregulator@1 {
+	wlan0_power: fixedregulator-1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "wlan0_power";
 
-		gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+		gpio = <&gpb 19 0>;
 		enable-active-high;
 	};
 
-	otg_power: fixedregulator@2 {
+	otg_power: fixedregulator-2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "otg_power";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 
-		gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
+		gpio = <&gpf 15 0>;
 		enable-active-high;
 	};
 };
-- 
2.39.2