Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <939efed2-521b-baef-2776-7bf937efe3ff@linaro.org>
Date:   Mon, 5 Jun 2023 08:39:54 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.2
Subject: Re: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
Content-Language: en-US
To:     Varshini Rajendran <varshini.rajendran@microchip.com>,
        tglx@linutronix.de, maz@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
        nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com,
        claudiu.beznea@microchip.com, davem@davemloft.net,
        edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
        gregkh@linuxfoundation.org, linux@armlinux.org.uk,
        mturquette@baylibre.com, sboyd@kernel.org, sre@kernel.org,
        broonie@kernel.org, arnd@arndb.de, gregory.clement@bootlin.com,
        sudeep.holla@arm.com, balamanikandan.gunasundar@microchip.com,
        mihai.sain@microchip.com, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        netdev@vger.kernel.org, linux-usb@vger.kernel.org,
        linux-clk@vger.kernel.org, linux-pm@vger.kernel.org
Cc:     Hari.PrasathGE@microchip.com, cristian.birsan@microchip.com,
        durai.manickamkr@microchip.com, manikandan.m@microchip.com,
        dharma.b@microchip.com, nayabbasha.sayed@microchip.com,
        balakrishnan.s@microchip.com
References: <20230603200243.243878-1-varshini.rajendran@microchip.com>
 <20230603200243.243878-5-varshini.rajendran@microchip.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230603200243.243878-5-varshini.rajendran@microchip.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 03/06/2023 22:02, Varshini Rajendran wrote:
> Add device tree file for SAM9X7 SoC family
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> [nicolas.ferre@microchip.com: add support for gmac to sam9x7]
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> [balamanikandan.gunasundar@microchip.com: Add device node csi2host and isc]
> Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
> ---
>  arch/arm/boot/dts/sam9x7.dtsi | 1333 +++++++++++++++++++++++++++++++++
>  1 file changed, 1333 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sam9x7.dtsi
> 
> diff --git a/arch/arm/boot/dts/sam9x7.dtsi b/arch/arm/boot/dts/sam9x7.dtsi
> new file mode 100644
> index 000000000000..f98160182fe6
> --- /dev/null
> +++ b/arch/arm/boot/dts/sam9x7.dtsi
> @@ -0,0 +1,1333 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
> + *
> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
> + */
> +
> +#include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/dma/at91.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/mfd/atmel-flexcom.h>
> +#include <dt-bindings/pinctrl/at91.h>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	model = "Microchip SAM9X7 SoC";
> +	compatible = "microchip,sam9x7";
> +	interrupt-parent = <&aic>;
> +
> +	aliases {
> +		serial0 = &dbgu;
> +		gpio0 = &pioA;
> +		gpio1 = &pioB;
> +		gpio2 = &pioC;
> +		gpio3 = &pioD;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			compatible = "arm,arm926ej-s";
> +			device_type = "cpu";
> +			reg = <0>;
> +		};
> +	};
> +
> +	clocks {
> +		slow_xtal: slow_xtal {

No underscores in node names. Use some common prefix or suffix, e.g. clock-

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +
> +		main_xtal: main_xtal {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	sram: sram@300000 {
> +		compatible = "mmio-sram";
> +		reg = <0x300000 0x10000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x300000 0x10000>;
> +	};
> +
> +	ahb {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		usb0: gadget@500000 {
> +			compatible = "microchip,sam9x60-udc";

Aren't you missing specific compatible? This applies everywhere.

> +			reg = <0x500000 0x100000>,
> +			      <0xf803c000 0x400>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> +			clock-names = "pclk", "hclk";
> +			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
> +			assigned-clock-rates = <480000000>;
> +			status = "disabled";
> +		};
> +
> +		ohci0: usb@600000 {
> +			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> +			reg = <0x600000 0x100000>;
> +			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
> +			clock-names = "ohci_clk", "hclk", "uhpck";
> +			status = "disabled";
> +		};
> +
> +		ehci0: usb@700000 {
> +			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
> +			reg = <0x700000 0x100000>;
> +			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
> +			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
> +			clock-names = "usb_clk", "ehci_clk";
> +			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
> +			assigned-clock-rates = <480000000>;
> +			status = "disabled";
> +		};
> +
> +		sdmmc0: sdio-host@80000000 {

Are you sure you have no dtbs_check warnings for this?

> +			compatible = "microchip,sam9x60-sdhci";
> +			reg = <0x80000000 0x300>;
> +			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
> +			clock-names = "hclock", "multclk";
> +			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
> +			assigned-clock-rates = <100000000>;
> +			status = "disabled";
> +		};
> +
> +		sdmmc1: sdio-host@90000000 {
> +			compatible = "microchip,sam9x60-sdhci";
> +			reg = <0x90000000 0x300>;
> +			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
> +			clock-names = "hclock", "multclk";
> +			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
> +			assigned-clock-rates = <100000000>;
> +			status = "disabled";
> +		};
> +	};
> +
> +	apb {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		flx4: flexcom@f0000000 {
> +			compatible = "atmel,sama5d2-flexcom";
> +			reg = <0xf0000000 0x200>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0xf0000000 0x800>;
> +			status = "disabled";
> +
> +			uart4: serial@200 {
> +				compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +				reg = <0x200 0x200>;
> +				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(8))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(9))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> +				clock-names = "usart";
> +				atmel,use-dma-rx;
> +				atmel,use-dma-tx;
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@400 {
> +				compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +				reg = <0x400 0x200>;
> +				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> +				clock-names = "spi_clk";
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(8))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(9))>;
> +				dma-names = "tx", "rx";
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@600 {
> +				compatible = "microchip,sam9x60-i2c";
> +				reg = <0x600 0x200>;
> +				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(8))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(9))>;
> +				dma-names = "tx", "rx";
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		flx5: flexcom@f0004000 {
> +			compatible = "atmel,sama5d2-flexcom";
> +			reg = <0xf0004000 0x200>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0xf0004000 0x800>;
> +			status = "disabled";
> +
> +			uart5: serial@200 {
> +				compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +				reg = <0x200 0x200>;
> +				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(10))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(11))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> +				clock-names = "usart";
> +				atmel,use-dma-rx;
> +				atmel,use-dma-tx;
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@400 {
> +				compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +				reg = <0x400 0x200>;
> +				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> +				clock-names = "spi_clk";
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(10))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(11))>;
> +				dma-names = "tx", "rx";
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@600 {
> +				compatible = "microchip,sam9x60-i2c";
> +				reg = <0x600 0x200>;
> +				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(10))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(11))>;
> +				dma-names = "tx", "rx";
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		dma0: dma-controller@f0008000 {
> +			compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
> +			reg = <0xf0008000 0x1000>;
> +			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
> +			#dma-cells = <1>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
> +			clock-names = "dma_clk";
> +			status = "disabled";
> +		};
> +
> +		ssc: ssc@f0010000 {
> +			compatible = "atmel,at91sam9g45-ssc";
> +			reg = <0xf0010000 0x4000>;
> +			interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
> +			dmas = <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(38))>,
> +			       <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(39))>;
> +			dma-names = "tx", "rx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
> +			clock-names = "pclk";
> +		};
> +
> +		gpu: gfx2d@f0018000 {
> +			compatible = "microchip,sam9x60-gfx2d";
> +			reg = <0xf0018000 0x4000>;
> +			interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
> +			clock-names = "periph_clk";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2s: i2s@f001c000 {
> +			compatible = "microchip,sam9x60-i2smcc";
> +			reg = <0xf001c000 0x100>;
> +			interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
> +			dmas = <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(36))>,
> +			       <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(37))>;
> +			dma-names = "tx", "rx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
> +			clock-names = "pclk", "gclk";
> +			status = "disabled";
> +		};
> +
> +		flx11: flexcom@f0020000 {
> +			compatible = "atmel,sama5d2-flexcom";
> +			reg = <0xf0020000 0x200>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0xf0020000 0x800>;
> +			status = "disabled";
> +
> +			uart11: serial@200 {
> +				compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +				reg = <0x200 0x200>;
> +				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(22))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(23))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> +				clock-names = "usart";
> +				atmel,use-dma-rx;
> +				atmel,use-dma-tx;
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +
> +			i2c11: i2c@600 {
> +				compatible = "microchip,sam9x60-i2c";
> +				reg = <0x600 0x200>;
> +				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(22))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(23))>;
> +				dma-names = "tx", "rx";
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		flx12: flexcom@f0024000 {
> +			compatible = "atmel,sama5d2-flexcom";
> +			reg = <0xf0024000 0x200>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0xf0024000 0x800>;
> +			status = "disabled";
> +
> +			uart12: serial@200 {
> +				compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +				reg = <0x200 0x200>;
> +				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(24))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(25))>;
> +				dma-names = "tx", "rx";
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> +				clock-names = "usart";
> +				atmel,use-dma-rx;
> +				atmel,use-dma-tx;
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +
> +			i2c12: i2c@600 {
> +				compatible = "microchip,sam9x60-i2c";
> +				reg = <0x600 0x200>;
> +				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> +				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> +				dmas = <&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(24))>,
> +					<&dma0
> +					(AT91_XDMAC_DT_MEM_IF(0) |
> +					 AT91_XDMAC_DT_PER_IF(1) |
> +					 AT91_XDMAC_DT_PERID(25))>;
> +				dma-names = "tx", "rx";
> +				atmel,fifo-size = <16>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		pit64b0: timer@f0028000 {
> +			compatible = "microchip,sam9x60-pit64b";
> +			reg = <0xf0028000 0x100>;
> +			interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
> +			clock-names = "pclk", "gclk";
> +		};
> +
> +		sha: sha@f002c000 {
> +			compatible = "atmel,at91sam9g46-sha";
> +			reg = <0xf002c000 0x100>;
> +			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
> +			dmas = <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(34))>;
> +			dma-names = "tx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
> +			clock-names = "sha_clk";
> +		};
> +
> +		trng: trng@f0030000 {

rng@

> +			compatible = "microchip,sam9x60-trng";
> +			reg = <0xf0030000 0x100>;
> +			interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> +			status = "disabled";
> +		};
> +
> +		aes: aes@f0034000 {

crypto@

> +			compatible = "atmel,at91sam9g46-aes";
> +			reg = <0xf0034000 0x100>;
> +			interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
> +			dmas = <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(32))>,
> +			       <&dma0
> +				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> +				 AT91_XDMAC_DT_PERID(33))>;
> +			dma-names = "tx", "rx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
> +			clock-names = "aes_clk";
> +		};
> +
> +		tdes: tdes@f0038000 {

crypto@


Best regards,
Krzysztof