Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <5c98362c-1808-d7d2-bff8-c2f2f3ae0e89@sberdevices.ru>
Date:   Tue, 6 Jun 2023 14:49:19 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.7.1
Subject: Re: [RFC PATCH v5 2/6] mtd: rawnand: meson: wait for command in
 polling mode
Content-Language: en-US
To:     Liang Yang <liang.yang@amlogic.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>
CC:     Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Kevin Hilman <khilman@baylibre.com>,
        Jerome Brunet <jbrunet@baylibre.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        <oxffffaa@gmail.com>, <kernel@sberdevices.ru>,
        <linux-mtd@lists.infradead.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-amlogic@lists.infradead.org>, <linux-kernel@vger.kernel.org>
References: <20230601061850.3907800-1-AVKrasnov@sberdevices.ru>
 <20230601061850.3907800-3-AVKrasnov@sberdevices.ru>
 <20230601100751.41c3ff0b@xps-13>
 <9e106d50-2524-c999-48b1-a20760238aaf@sberdevices.ru>
 <20230605110546.6cb00a8d@xps-13>
 <2a755783-1d56-9842-2eee-b5ab41152c81@amlogic.com>
 <163e0684-caff-77d0-1eaf-9a58290c200d@amlogic.com>
From:   Arseniy Krasnov <avkrasnov@sberdevices.ru>
In-Reply-To: <163e0684-caff-77d0-1eaf-9a58290c200d@amlogic.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk


On 05.06.2023 16:30, Liang Yang wrote:
> 
> 
> On 2023/6/5 21:19, Liang Yang wrote:
>> Hi Miquel and Arseniy,
>>
>>
>> On 2023/6/5 17:05, Miquel Raynal wrote:
>>> [ EXTERNAL EMAIL ]
>>>
>>> Hi Arseniy,
>>>
>>>>>> @@ -1412,6 +1419,8 @@ static int meson_nfc_probe(struct platform_device *pdev)
>>>>>>             return ret;
>>>>>>     }
>>>>>>
>>>>>> +  nfc->use_polling = of_property_read_bool(dev->of_node, "polling");
>>>>>
>>>>> This is a problem. You cannot add a polling property like that.
>>>>>
>>>>> There is already a nand-rb property which is supposed to carry how are
>>>>> wired the RB lines. I don't see any in-tree users of the compatibles, I
>>>>> don't know how acceptable it is to consider using soft fallback when
>>>>> this property is missing, otherwise take the values of the rb lines
>>>>> provided in the DT and user hardware control, but I would definitely
>>>>> prefer that.
>>>>
>>>> I see. So i need to implement processing of this property here? And if it
>>>> is missed -> use software waiting. I think interesting thing will be that:
>>>>
>>>> 1) Even with support of this property here, I really don't know how to pass
>>>>     RB values to this controller - I just have define for RB command and that's
>>>>     it. I found that this property is an array of u32 - IIUC each element is
>>>>     RB pin per chip. May be i need to dive into the old vendor's driver to find
>>>>     how to use RB values (although this driver uses software waiting so I'm not
>>>>     sure that I'll find something in it).
>>>
>>> Liang, can you please give use the relevant information here? How do we
>>> target RB0 and RB1? It seems like you use the CS as only information
>>> like if the RB lines where hardwired internally to a CS. Can we invert
>>> the lines with a specific configuration?
>>
>> Controllor has only one external RB pinmux (NAND_RB0). all the RB pins
>> of different CEs need to be bound into one wire and connect with
>> NAND_RB0 if want to use controller polling rb. the current operating
>> CE of NAND is decided to "chip_select", of course controller internally has different nfc commands to regconize which Ce's RB signal is polling.
>>
>> <&nand_pins> in dts/yaml should include the NAND_RB0 if hardware connects, or use software polling here.
>>
>> @Arseniy, sorry, i don't travel all the informations yet. but why don't you use the new RB_INT command with irq that i provided in another thread. the new RB_INT command doesn't depend on the physical RB wires, it also send the READ status command(0x70) and wait for the irq wake up completion.
> 
> Use "nand-rb" in dts to decide old RB_INT(physical RB wires is needed) or new RB_INT(no physical RB wires). the new RB_INT command decides the RB0 or RB1 by the previous command with ce args.
> 
>>
>>> Arseniy, if the answer to my above question is no, then you should
>>> expect the nand-rb and reg arrays to be identical. If they are not,
>>> then you can return -EINVAL.
>>>
>>> If the nand-rb property is missing, then fallback to software wait.
>>>
>>>> 2) I can't test RB mode - I don't have such device :(
>>>>
>>>> Also for example in arasan-nand-controller.c parsed 'nand-rb' values are used
>>>> in controller specific register for waiting (I guess Meson controller has something
>>>> like that, but I don't have doc). While in marvell_nand.c it looks like that they parse
>>>> 'nand-rb' property, but never use it.
>>>
>>> Yes, the logic around the second RB line (taking care of CS1/CS3) is
>>> slightly broken or at least badly documented, and thus should not be
>>> used.
>>>
>>>>> In any case you'll need a dt-binding update which must be acked by
>>>>> dt-binding maintainers.
>>>>
>>>> You mean to add this property desc to Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml ?
>>>
>>> Yes. In a dedicated patch. Something along the lines:
>>>
>>>          nand-rb: true
>>>
>>> inside the nand chip object should be fine. And flag the change as a
>>> fix because we should have used and parsed this property since the
>>> beginning.

Miquel,

Small remark, do we really need to add this 'nand-rb' to the chip object, as Liang said,
that there is only one RB wire (e.g. only one or nothing)? Maybe for Meson I can add it to the
meson controller structure?

Thanks, Arseniy

>>>
>>> Thanks,
>>> Miquèl