Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <d7132808-1b24-08ab-0d78-9f4012c4da04@linaro.org>
Date:   Tue, 6 Jun 2023 14:50:18 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.2
Subject: Re: [PATCH 3/3] arm64: dts: qcom: sdm630: Add support for modem
 remoteproc
Content-Language: en-US
To:     Alexey Minnekhanov <alexeymin@postmarketos.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Mathieu Poirier <mathieu.poirier@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org
References: <20230604061421.3787649-1-alexeymin@postmarketos.org>
 <20230604061421.3787649-3-alexeymin@postmarketos.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230604061421.3787649-3-alexeymin@postmarketos.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 4.06.2023 08:14, Alexey Minnekhanov wrote:
> Modem subsystem in SDM630/660 is similar to MSM8998 and
> device tree node for it is based on the one from msm8998.dtsi.
> 
> Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm630.dtsi | 57 ++++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 5c4086d2fa99c..5e68972d48fb4 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -1026,6 +1026,63 @@ data-pins {
>  			};
>  		};
>  
> +		remoteproc_mss: remoteproc@4080000 {
> +			compatible = "qcom,sdm660-mss-pil";
> +			reg = <0x04080000 0x100>, <0x04180000 0x40>;
> +			reg-names = "qdsp6", "rmb";
> +
> +			interrupts-extended =
> +				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
> +				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
Please remove the \n\t\t\t after = and align them to the first entry

> +			interrupt-names = "wdog", "fatal", "ready",
> +					"handover", "stop-ack",
> +					"shutdown-ack";
Please turn this and clock-names into vertical lists with one
entry per line

> +
> +			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> +				<&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
And these too, align them with a space.


looks good otherwise!

Konrad
> +				<&gcc GCC_BOOT_ROM_AHB_CLK>,
> +				<&gcc GPLL0_OUT_MSSCC>,
> +				<&gcc GCC_MSS_SNOC_AXI_CLK>,
> +				<&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
> +				<&rpmcc RPM_SMD_QDSS_CLK>,
> +				<&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "iface", "bus", "mem", "gpll0_mss",
> +				"snoc_axi", "mnoc_axi", "qdss", "xo";
> +
> +			qcom,smem-states = <&modem_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			resets = <&gcc GCC_MSS_RESTART>;
> +			reset-names = "mss_restart";
> +
> +			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
> +
> +			power-domains = <&rpmpd SDM660_VDDCX>,
> +					<&rpmpd SDM660_VDDMX>;
> +			power-domain-names = "cx", "mx";
> +
> +			status = "disabled";
> +
> +			mba {
> +				memory-region = <&mba_region>;
> +			};
> +
> +			mpss {
> +				memory-region = <&mpss_region>;
> +			};
> +
> +			glink-edge {
> +				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
> +				label = "modem";
> +				qcom,remote-pid = <1>;
> +				mboxes = <&apcs_glb 15>;
> +			};
> +		};
> +
>  		adreno_gpu: gpu@5000000 {
>  			compatible = "qcom,adreno-508.0", "qcom,adreno";
>