Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <797c61d2-b8f1-e80e-24b9-4c7a7d266080@linaro.org>
Date:   Thu, 8 Jun 2023 08:37:57 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.2
Subject: Re: [v6 0/4] Support pwm/tach driver for aspeed ast26xx
Content-Language: en-US
To:     Billy Tsai <billy_tsai@aspeedtech.com>, jdelvare@suse.com,
        linux@roeck-us.net, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, joel@jms.id.au, andrew@aj.id.au,
        thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de,
        corbet@lwn.net, p.zabel@pengutronix.de,
        linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        linux-pwm@vger.kernel.org, linux-doc@vger.kernel.org,
        patrick@stwcx.xyz
References: <20230608021839.12769-1-billy_tsai@aspeedtech.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230608021839.12769-1-billy_tsai@aspeedtech.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 08/06/2023 04:18, Billy Tsai wrote:
> Unlike the old design that the register setting of the TACH should based
> on the configure of the PWM. In ast26xx, the dependency between pwm and
> tach controller is eliminated and becomes a separate hardware block. One
> is used to provide pwm output and another is used to monitor the frequency
> of the input. Therefore, this patch serials implements them by writing the
> two driver "pwm-aspeed-ast2600.c" and "tach-aspeed-ast2600.c". The former
> is following the pwm subsystem which can apply the existed driver to
> controller the fan(pwm-fan.c), beeper(pwm-beeper.c) and so on. The latter
> is following the sysfs interface of hwmon to creat the node for fan
> monitor.

You like to ignore my comments... How did you implement them? Go one by
one - answer to v4 emails.

Best regards,
Krzysztof