Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 8 Jun 2023 13:40:54 +0530
From:   Varadarajan Narayanan <quic_varada@quicinc.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CC:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <gregkh@linuxfoundation.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <mturquette@baylibre.com>,
        <sboyd@kernel.org>, <quic_wcheng@quicinc.com>,
        <linux-arm-msm@vger.kernel.org>, <linux-usb@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-clk@vger.kernel.org>
Subject: Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
Message-ID: <20230608081053.GB16505@varda-linux.qualcomm.com>
References: <cover.1686045347.git.quic_varada@quicinc.com>
 <5a14d113e90c85777d1c01af38a85f40d35519e0.1686045347.git.quic_varada@quicinc.com>
 <307409f2-a516-4aea-45bb-137ffc2bc725@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <307409f2-a516-4aea-45bb-137ffc2bc725@linaro.org>
User-Agent: Mutt/1.5.24 (2015-08-30)
Precedence: bulk

On Wed, Jun 07, 2023 at 08:50:41PM +0200, Krzysztof Kozlowski wrote:
> On 07/06/2023 12:48, Varadarajan Narayanan wrote:
> > Add USB phy and controller related nodes
> >
> > SS PHY need two supplies and HS PHY needs three supplies. 0.925V
> > and 3.3V are from fixed regulators and 1.8V is generated from
> > PMIC's LDO
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> >  Changes in v12:
> > 	- Rebase
> >  Changes in v11:
> > 	- Rename dwc_0 -> usb_0_dwc3
> >  Changes in v10:
> > 	- Fix regulator definitions
> >  Changes in v8:
> > 	- Change clocks order to match the bindings
> >  Changes in v7:
> > 	- Change com_aux -> cfg_ahb
> >  Changes in v6:
> > 	- Introduce fixed regulators for the phy
> > 	- Resolved all 'make dtbs_check' messages
> >
> >  Changes in v5:
> > 	- Fix additional comments
> > 	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> > 	- 'make dtbs_check' giving the following messages since
> > 	  ipq9574 doesn't have power domains. Hope this is ok
> >
> > 		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
> >         	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> > 		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
> >         	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> >
> >  Changes in v4:
> > 	- Use newer bindings without subnodes
> > 	- Fix coding style issues
> >
> >  Changes in v3:
> > 	- Insert the nodes at proper location
> >
> >  Changes in v2:
> > 	- Fixed issues flagged by Krzysztof
> > 	- Fix issues reported by make dtbs_check
> > 	- Remove NOC related clocks (to be added with proper
> > 	  interconnect support)
> > ---
> >  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 ++++++++++++++++++++++++++++++++++
> >  1 file changed, 104 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > index 0baeb10..8f7c59e 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > @@ -94,6 +94,24 @@
> >  		};
> >  	};
> >
> > +	fixed_3p3: s3300 {
>
> Use regulator- prefix for node name.

ok

> > +		compatible = "regulator-fixed";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		regulator-boot-on;
> > +		regulator-always-on;
> > +		regulator-name = "fixed_3p3";
> > +	};
> > +
> > +	fixed_0p925: s0925 {
> > +		compatible = "regulator-fixed";
> > +		regulator-min-microvolt = <925000>;
> > +		regulator-max-microvolt = <925000>;
> > +		regulator-boot-on;
> > +		regulator-always-on;
> > +		regulator-name = "fixed_0p925";
> > +	};
> > +
> >  	memory@40000000 {
> >  		device_type = "memory";
> >  		/* We expect the bootloader to fill in the size */
> > @@ -465,6 +483,92 @@
> >  			status = "disabled";
> >  		};
> >
> > +		usb_0_qusbphy: phy@7b000 {
> > +			compatible = "qcom,ipq9574-qusb2-phy";
> > +			reg = <0x0007b000 0x180>;
> > +			#phy-cells = <0>;
> > +
> > +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > +				 <&xo_board_clk>;
> > +			clock-names = "cfg_ahb",
> > +				      "ref";
> > +
> > +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> > +			status = "disabled";
> > +		};
> > +
> > +		usb_0_qmpphy: phy@7d000 {
> > +			compatible = "qcom,ipq9574-qmp-usb3-phy";
> > +			reg = <0x0007d000 0xa00>;
> > +			#phy-cells = <0>;
> > +
> > +			clocks = <&gcc GCC_USB0_AUX_CLK>,
> > +				 <&xo_board_clk>,
> > +				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > +				 <&gcc GCC_USB0_PIPE_CLK>;
> > +			clock-names = "aux",
> > +				      "ref",
> > +				      "cfg_ahb",
> > +				      "pipe";
> > +
> > +			resets = <&gcc GCC_USB0_PHY_BCR>,
> > +				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> > +			reset-names = "phy",
> > +				      "phy_phy";
> > +
> > +			status = "disabled";
>
> status is always the last property.

ok

> > +
> > +			#clock-cells = <0>;
> > +			clock-output-names = "usb0_pipe_clk";
> > +		};
> > +
> > +		usb3: usb@8af8800 {
> > +			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> > +			reg = <0x08af8800 0x400>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +			ranges;
> > +
> > +			clocks = <&gcc GCC_SNOC_USB_CLK>,
> > +				 <&gcc GCC_USB0_MASTER_CLK>,
> > +				 <&gcc GCC_ANOC_USB_AXI_CLK>,
> > +				 <&gcc GCC_USB0_SLEEP_CLK>,
> > +				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +
> > +			clock-names = "cfg_noc",
> > +				      "core",
> > +				      "iface",
> > +				      "sleep",
> > +				      "mock_utmi";
> > +
> > +			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> > +					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +			assigned-clock-rates = <200000000>,
> > +					       <24000000>;
> > +
> > +			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "pwr_event";
> > +
> > +			resets = <&gcc GCC_USB_BCR>;
> > +			status = "disabled";
> > +
> > +			usb_0_dwc3: usb@8a00000 {
> > +				compatible = "snps,dwc3";
> > +				reg = <0x8a00000 0xcd00>;
> > +				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +				clock-names = "ref";
> > +				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> > +				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
> > +				phy-names = "usb2-phy", "usb3-phy";
> > +				tx-fifo-resize;
> > +				snps,is-utmi-l1-suspend;
> > +				snps,hird-threshold = /bits/ 8 <0x0>;
> > +				snps,dis_u2_susphy_quirk;
> > +				snps,dis_u3_susphy_quirk;
> > +				dr_mode = "host";
>
> Why is this property of the SoC?

Will remove it from here. It is present in ipq9574-rdp433.dts

Thanks
Varada