Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Varadarajan Narayanan <quic_varada@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <gregkh@linuxfoundation.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <mturquette@baylibre.com>,
        <sboyd@kernel.org>, <quic_wcheng@quicinc.com>,
        <linux-arm-msm@vger.kernel.org>, <linux-usb@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-clk@vger.kernel.org>
CC:     Varadarajan Narayanan <quic_varada@quicinc.com>
Subject: [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
Date:   Thu, 8 Jun 2023 15:33:29 +0530
Message-ID: <2f91eb879daaf9955dc56135d60a4be5e191a44d.1686217906.git.quic_varada@quicinc.com>
In-Reply-To: <cover.1686217906.git.quic_varada@quicinc.com>
References: <cover.1686217906.git.quic_varada@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add USB phy and controller related nodes

SS PHY need two supplies and HS PHY needs three supplies. 0.925V
and 3.3V are from fixed regulators and 1.8V is generated from
PMIC's LDO

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v13:
	- Move fixed regulator definitions from SoC dtsi to board dts
	- Remove 'dr_mode' from SoC dtsi
	- Move 'status' property to the end
 Changes in v12:
	- Rebase
 Changes in v11:
	- Rename dwc_0 -> usb_0_dwc3
 Changes in v10:
	- Fix regulator definitions
 Changes in v8:
	- Change clocks order to match the bindings
 Changes in v7:
	- Change com_aux -> cfg_ahb
 Changes in v6:
	- Introduce fixed regulators for the phy
	- Resolved all 'make dtbs_check' messages

 Changes in v5:
	- Fix additional comments
	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
	- 'make dtbs_check' giving the following messages since
	  ipq9574 doesn't have power domains. Hope this is ok

		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

 Changes in v4:
	- Use newer bindings without subnodes
	- Fix coding style issues

 Changes in v3:
	- Insert the nodes at proper location

 Changes in v2:
	- Fixed issues flagged by Krzysztof
	- Fix issues reported by make dtbs_check
	- Remove NOC related clocks (to be added with proper
	  interconnect support)
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 18 ++++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 85 +++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 2b3ed8d..8261a2b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -21,6 +21,24 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
 };
 
 &blsp1_uart2 {
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0baeb10..feabc19 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -465,6 +465,91 @@
 			status = "disabled";
 		};
 
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+
+			status = "disabled";
+		};
+
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			usb_0_dwc3: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
-- 
2.7.4