Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rohit Agarwal <quic_rohiagar@quicinc.com>
To:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        conor+dt@kernel.org, rafael@kernel.org, viresh.kumar@linaro.org,
        tglx@linutronix.de, maz@kernel.org, mani@kernel.org,
        robimarko@gmail.com
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        Rohit Agarwal <quic_rohiagar@quicinc.com>
Subject: [PATCH v4 0/5] Add devicetree support for SDX75 Modem and IDP
Date:   Fri,  9 Jun 2023 17:20:33 +0530
Message-Id: <1686311438-24177-1-git-send-email-quic_rohiagar@quicinc.com>
Precedence: bulk

Hi,

Changes in v4:
 - Addressed some of the dt bindings check mentioned by Krzysztof.

Changes in v3:
 - Clubbed all the dt node into a single patch as suggested by Krzysztof.
 - Removed the applied patch.
 - Addressed some comments from Konrad and Dmitry.

Changes in v2:
 - Added the CPUFreq support patch.
 - Collected the Acked by tags.
 - Addressed some minor comments from Konrad.

This series adds devicetree support for Qualcomm SDX75 platform and IDP
board. This series functionally depends on GCC and RPMh Clock support
series [1], and pinctrl support for SDX75 [2] which are under review.

With this current devicetree support, the IDP can boot into initramfsshell.

[1] https://lore.kernel.org/lkml/20230419133013.2563-3-quic_tdas@quicinc.com/
[2] https://lore.kernel.org/all/1684409015-25196-1-git-send-email-quic_rohiagar@quicinc.com/

Thanks,
Rohit.


Rohit Agarwal (5):
  dt-bindings: arm: qcom: Document SDX75 platform and boards
  dt-bindings: firmware: scm: Add compatible for SDX75
  dt-bindings: interrupt-controller: Add SDX75 PDC compatible
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  arm64: dts: qcom: Add SDX75 platform and IDP board support

 Documentation/devicetree/bindings/arm/qcom.yaml    |   7 +
 .../bindings/cpufreq/cpufreq-qcom-hw.yaml          |   1 +
 .../devicetree/bindings/firmware/qcom,scm.yaml     |   1 +
 .../bindings/interrupt-controller/qcom,pdc.yaml    |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 arch/arm64/boot/dts/qcom/sdx75-idp.dts             |  33 +
 arch/arm64/boot/dts/qcom/sdx75.dtsi                | 670 +++++++++++++++++++++
 7 files changed, 714 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi

-- 
2.7.4