Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 10 Jun 2023 10:06:19 +0200
From:   Jiri Pirko <jiri@resnulli.us>
To:     Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc:     kuba@kernel.org, vadfed@meta.com, jonathan.lemon@gmail.com,
        pabeni@redhat.com, corbet@lwn.net, davem@davemloft.net,
        edumazet@google.com, vadfed@fb.com, jesse.brandeburg@intel.com,
        anthony.l.nguyen@intel.com, saeedm@nvidia.com, leon@kernel.org,
        richardcochran@gmail.com, sj@kernel.org, javierm@redhat.com,
        ricardo.canuelo@collabora.com, mst@redhat.com, tzimmermann@suse.de,
        michal.michalik@intel.com, gregkh@linuxfoundation.org,
        jacek.lawrynowicz@linux.intel.com, airlied@redhat.com,
        ogabbay@kernel.org, arnd@arndb.de, nipun.gupta@amd.com,
        axboe@kernel.dk, linux@zary.sk, masahiroy@kernel.org,
        benjamin.tissoires@redhat.com, geert+renesas@glider.be,
        milena.olech@intel.com, kuniyu@amazon.com, liuhangbin@gmail.com,
        hkallweit1@gmail.com, andy.ren@getcruise.com, razor@blackwall.org,
        idosch@nvidia.com, lucien.xin@gmail.com, nicolas.dichtel@6wind.com,
        phil@nwl.cc, claudiajkang@gmail.com, linux-doc@vger.kernel.org,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
        intel-wired-lan@lists.osuosl.org, linux-rdma@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, poros@redhat.com,
        mschmidt@redhat.com, linux-clk@vger.kernel.org,
        vadim.fedorenko@linux.dev
Subject: Re: [RFC PATCH v8 09/10] ptp_ocp: implement DPLL ops
Message-ID: <ZIQu+/o4J0ZBspVg@nanopsycho>
References: <20230609121853.3607724-1-arkadiusz.kubalewski@intel.com>
 <20230609121853.3607724-10-arkadiusz.kubalewski@intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230609121853.3607724-10-arkadiusz.kubalewski@intel.com>
Precedence: bulk

Fri, Jun 09, 2023 at 02:18:52PM CEST, arkadiusz.kubalewski@intel.com wrote:
>From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
>
>Implement basic DPLL operations in ptp_ocp driver as the
>simplest example of using new subsystem.
>
>Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
>Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>---
> drivers/ptp/Kconfig   |   1 +
> drivers/ptp/ptp_ocp.c | 329 +++++++++++++++++++++++++++++++++++-------
> 2 files changed, 278 insertions(+), 52 deletions(-)
>
>diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
>index b00201d81313..e3575c2e34dc 100644
>--- a/drivers/ptp/Kconfig
>+++ b/drivers/ptp/Kconfig
>@@ -177,6 +177,7 @@ config PTP_1588_CLOCK_OCP
> 	depends on COMMON_CLK
> 	select NET_DEVLINK
> 	select CRC16
>+	select DPLL
> 	help
> 	  This driver adds support for an OpenCompute time card.
> 
>diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
>index ab8cab4d1560..40a1ab7053d4 100644
>--- a/drivers/ptp/ptp_ocp.c
>+++ b/drivers/ptp/ptp_ocp.c
>@@ -23,6 +23,7 @@
> #include <linux/mtd/mtd.h>
> #include <linux/nvmem-consumer.h>
> #include <linux/crc16.h>
>+#include <linux/dpll.h>
> 
> #define PCI_VENDOR_ID_FACEBOOK			0x1d9b
> #define PCI_DEVICE_ID_FACEBOOK_TIMECARD		0x0400
>@@ -260,12 +261,21 @@ enum ptp_ocp_sma_mode {
> 	SMA_MODE_OUT,
> };
> 
>+static struct dpll_pin_frequency ptp_ocp_sma_freq[] = {
>+	DPLL_PIN_FREQUENCY_1PPS,
>+	DPLL_PIN_FREQUENCY_10MHZ,
>+	DPLL_PIN_FREQUENCY_IRIG_B,
>+	DPLL_PIN_FREQUENCY_DCF77,
>+};
>+
> struct ptp_ocp_sma_connector {
> 	enum	ptp_ocp_sma_mode mode;
> 	bool	fixed_fcn;
> 	bool	fixed_dir;
> 	bool	disabled;
> 	u8	default_fcn;
>+	struct dpll_pin		   *dpll_pin;
>+	struct dpll_pin_properties dpll_prop;
> };
> 
> struct ocp_attr_group {
>@@ -294,6 +304,7 @@ struct ptp_ocp_serial_port {
> 
> #define OCP_BOARD_ID_LEN		13
> #define OCP_SERIAL_LEN			6
>+#define OCP_SMA_NUM			4
> 
> struct ptp_ocp {
> 	struct pci_dev		*pdev;
>@@ -350,8 +361,9 @@ struct ptp_ocp {
> 	u32			ts_window_adjust;
> 	u64			fw_cap;
> 	struct ptp_ocp_signal	signal[4];
>-	struct ptp_ocp_sma_connector sma[4];
>+	struct ptp_ocp_sma_connector sma[OCP_SMA_NUM];

Strictly speaking, this 4->OCP_SMA_NUM replacement should
be done as a separate patch.


> 	const struct ocp_sma_op *sma_op;
>+	struct dpll_device *dpll;
> };
> 
> #define OCP_REQ_TIMESTAMP	BIT(0)
>@@ -835,6 +847,7 @@ static DEFINE_IDR(ptp_ocp_idr);
> struct ocp_selector {
> 	const char *name;
> 	int value;
>+	u64 frequency;
> };
> 
> static const struct ocp_selector ptp_ocp_clock[] = {
>@@ -855,31 +868,31 @@ static const struct ocp_selector ptp_ocp_clock[] = {
> #define SMA_SELECT_MASK		GENMASK(14, 0)
> 
> static const struct ocp_selector ptp_ocp_sma_in[] = {
>-	{ .name = "10Mhz",	.value = 0x0000 },
>-	{ .name = "PPS1",	.value = 0x0001 },
>-	{ .name = "PPS2",	.value = 0x0002 },
>-	{ .name = "TS1",	.value = 0x0004 },
>-	{ .name = "TS2",	.value = 0x0008 },
>-	{ .name = "IRIG",	.value = 0x0010 },
>-	{ .name = "DCF",	.value = 0x0020 },
>-	{ .name = "TS3",	.value = 0x0040 },
>-	{ .name = "TS4",	.value = 0x0080 },
>-	{ .name = "FREQ1",	.value = 0x0100 },
>-	{ .name = "FREQ2",	.value = 0x0200 },
>-	{ .name = "FREQ3",	.value = 0x0400 },
>-	{ .name = "FREQ4",	.value = 0x0800 },
>-	{ .name = "None",	.value = SMA_DISABLE },
>+	{ .name = "10Mhz",  .value = 0x0000,      .frequency = 10000000 },
>+	{ .name = "PPS1",   .value = 0x0001,      .frequency = 1 },
>+	{ .name = "PPS2",   .value = 0x0002,      .frequency = 1 },
>+	{ .name = "TS1",    .value = 0x0004,      .frequency = 0 },
>+	{ .name = "TS2",    .value = 0x0008,      .frequency = 0 },
>+	{ .name = "IRIG",   .value = 0x0010,      .frequency = 10000 },
>+	{ .name = "DCF",    .value = 0x0020,      .frequency = 77500 },
>+	{ .name = "TS3",    .value = 0x0040,      .frequency = 0 },
>+	{ .name = "TS4",    .value = 0x0080,      .frequency = 0 },
>+	{ .name = "FREQ1",  .value = 0x0100,      .frequency = 0 },
>+	{ .name = "FREQ2",  .value = 0x0200,      .frequency = 0 },
>+	{ .name = "FREQ3",  .value = 0x0400,      .frequency = 0 },
>+	{ .name = "FREQ4",  .value = 0x0800,      .frequency = 0 },
>+	{ .name = "None",   .value = SMA_DISABLE, .frequency = 0 },
> 	{ }
> };
> 
> static const struct ocp_selector ptp_ocp_sma_out[] = {
>-	{ .name = "10Mhz",	.value = 0x0000 },
>-	{ .name = "PHC",	.value = 0x0001 },
>-	{ .name = "MAC",	.value = 0x0002 },
>-	{ .name = "GNSS1",	.value = 0x0004 },
>-	{ .name = "GNSS2",	.value = 0x0008 },
>-	{ .name = "IRIG",	.value = 0x0010 },
>-	{ .name = "DCF",	.value = 0x0020 },
>+	{ .name = "10Mhz",	.value = 0x0000,  .frequency = 10000000 },
>+	{ .name = "PHC",	.value = 0x0001,  .frequency = 1 },
>+	{ .name = "MAC",	.value = 0x0002,  .frequency = 1 },
>+	{ .name = "GNSS1",	.value = 0x0004,  .frequency = 1 },
>+	{ .name = "GNSS2",	.value = 0x0008,  .frequency = 1 },
>+	{ .name = "IRIG",	.value = 0x0010,  .frequency = 10000 },
>+	{ .name = "DCF",	.value = 0x0020,  .frequency = 77000 },
> 	{ .name = "GEN1",	.value = 0x0040 },
> 	{ .name = "GEN2",	.value = 0x0080 },
> 	{ .name = "GEN3",	.value = 0x0100 },
>@@ -890,15 +903,15 @@ static const struct ocp_selector ptp_ocp_sma_out[] = {
> };
> 
> static const struct ocp_selector ptp_ocp_art_sma_in[] = {
>-	{ .name = "PPS1",	.value = 0x0001 },
>-	{ .name = "10Mhz",	.value = 0x0008 },
>+	{ .name = "PPS1",	.value = 0x0001,  .frequency = 1 },
>+	{ .name = "10Mhz",	.value = 0x0008,  .frequency = 1000000 },
> 	{ }
> };
> 
> static const struct ocp_selector ptp_ocp_art_sma_out[] = {
>-	{ .name = "PHC",	.value = 0x0002 },
>-	{ .name = "GNSS",	.value = 0x0004 },
>-	{ .name = "10Mhz",	.value = 0x0010 },
>+	{ .name = "PHC",	.value = 0x0002,  .frequency = 1 },
>+	{ .name = "GNSS",	.value = 0x0004,  .frequency = 1 },
>+	{ .name = "10Mhz",	.value = 0x0010,  .frequency = 10000000 },
> 	{ }
> };
> 
>@@ -2282,22 +2295,35 @@ ptp_ocp_sma_fb_set_inputs(struct ptp_ocp *bp, int sma_nr, u32 val)
> static void
> ptp_ocp_sma_fb_init(struct ptp_ocp *bp)
> {
>+	struct dpll_pin_properties prop = {
>+		.board_label = NULL,

It's NULL, remove this poitless init.


>+		.type = DPLL_PIN_TYPE_EXT,
>+		.capabilities = DPLL_PIN_CAPS_DIRECTION_CAN_CHANGE,
>+		.freq_supported_num = ARRAY_SIZE(ptp_ocp_sma_freq),
>+		.freq_supported = ptp_ocp_sma_freq,
>+
>+	};
> 	u32 reg;
> 	int i;
> 
> 	/* defaults */
>+	for (i = 0; i < OCP_SMA_NUM; i++) {
>+		bp->sma[i].default_fcn = i & 1;
>+		bp->sma[i].dpll_prop = prop;
>+		bp->sma[i].dpll_prop.board_label =
>+			bp->ptp_info.pin_config[i].name;

It is really label on a board? Isn't it rather label on a front panel?


>+	}
> 	bp->sma[0].mode = SMA_MODE_IN;
> 	bp->sma[1].mode = SMA_MODE_IN;
> 	bp->sma[2].mode = SMA_MODE_OUT;
> 	bp->sma[3].mode = SMA_MODE_OUT;
>-	for (i = 0; i < 4; i++)
>-		bp->sma[i].default_fcn = i & 1;
>-
> 	/* If no SMA1 map, the pin functions and directions are fixed. */
> 	if (!bp->sma_map1) {
>-		for (i = 0; i < 4; i++) {
>+		for (i = 0; i < OCP_SMA_NUM; i++) {
> 			bp->sma[i].fixed_fcn = true;
> 			bp->sma[i].fixed_dir = true;
>+			bp->sma[1].dpll_prop.capabilities &=
>+				~DPLL_PIN_CAPS_DIRECTION_CAN_CHANGE;
> 		}
> 		return;
> 	}
>@@ -2307,7 +2333,7 @@ ptp_ocp_sma_fb_init(struct ptp_ocp *bp)
> 	 */
> 	reg = ioread32(&bp->sma_map2->gpio2);
> 	if (reg == 0xffffffff) {
>-		for (i = 0; i < 4; i++)
>+		for (i = 0; i < OCP_SMA_NUM; i++)
> 			bp->sma[i].fixed_dir = true;
> 	} else {
> 		reg = ioread32(&bp->sma_map1->gpio1);
>@@ -2329,7 +2355,7 @@ static const struct ocp_sma_op ocp_fb_sma_op = {
> };
> 
> static int
>-ptp_ocp_fb_set_pins(struct ptp_ocp *bp)
>+ptp_ocp_set_pins(struct ptp_ocp *bp)
> {
> 	struct ptp_pin_desc *config;
> 	int i;
>@@ -2396,16 +2422,16 @@ ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r)
> 
> 	ptp_ocp_tod_init(bp);
> 	ptp_ocp_nmea_out_init(bp);
>-	ptp_ocp_sma_init(bp);
> 	ptp_ocp_signal_init(bp);
> 
> 	err = ptp_ocp_attr_group_add(bp, fb_timecard_groups);
> 	if (err)
> 		return err;
> 
>-	err = ptp_ocp_fb_set_pins(bp);
>+	err = ptp_ocp_set_pins(bp);
> 	if (err)
> 		return err;
>+	ptp_ocp_sma_init(bp);
> 
> 	return ptp_ocp_init_clock(bp);
> }
>@@ -2445,6 +2471,14 @@ ptp_ocp_register_resources(struct ptp_ocp *bp, kernel_ulong_t driver_data)
> static void
> ptp_ocp_art_sma_init(struct ptp_ocp *bp)
> {
>+	struct dpll_pin_properties prop = {
>+		.board_label = NULL,

It's NULL, remove this pointless init.


>+		.type = DPLL_PIN_TYPE_EXT,
>+		.capabilities = 0,

Again, it is zero, drop it.


>+		.freq_supported_num = ARRAY_SIZE(ptp_ocp_sma_freq),
>+		.freq_supported = ptp_ocp_sma_freq,
>+
>+	};
> 	u32 reg;
> 	int i;
> 
>@@ -2459,16 +2493,17 @@ ptp_ocp_art_sma_init(struct ptp_ocp *bp)
> 	bp->sma[2].default_fcn = 0x10;	/* OUT: 10Mhz */
> 	bp->sma[3].default_fcn = 0x02;	/* OUT: PHC */
> 
>-	/* If no SMA map, the pin functions and directions are fixed. */
>-	if (!bp->art_sma) {
>-		for (i = 0; i < 4; i++) {
>+
>+	for (i = 0; i < OCP_SMA_NUM; i++) {
>+		/* If no SMA map, the pin functions and directions are fixed. */
>+		bp->sma[i].dpll_prop = prop;
>+		bp->sma[i].dpll_prop.board_label =

It is really label on a board? Isn't it rather label on a front panel?


>+			bp->ptp_info.pin_config[i].name;
>+		if (!bp->art_sma) {
> 			bp->sma[i].fixed_fcn = true;
> 			bp->sma[i].fixed_dir = true;
>+			continue;
> 		}
>-		return;
>-	}
>-
>-	for (i = 0; i < 4; i++) {
> 		reg = ioread32(&bp->art_sma->map[i].gpio);
> 
> 		switch (reg & 0xff) {
>@@ -2479,9 +2514,13 @@ ptp_ocp_art_sma_init(struct ptp_ocp *bp)
> 		case 1:
> 		case 8:
> 			bp->sma[i].mode = SMA_MODE_IN;
>+			bp->sma[i].dpll_prop.capabilities =
>+				DPLL_PIN_CAPS_DIRECTION_CAN_CHANGE;
> 			break;
> 		default:
> 			bp->sma[i].mode = SMA_MODE_OUT;
>+			bp->sma[i].dpll_prop.capabilities =
>+				DPLL_PIN_CAPS_DIRECTION_CAN_CHANGE;
> 			break;
> 		}
> 	}
>@@ -2548,6 +2587,9 @@ ptp_ocp_art_board_init(struct ptp_ocp *bp, struct ocp_resource *r)
> 	/* Enable MAC serial port during initialisation */
> 	iowrite32(1, &bp->board_config->mro50_serial_activate);
> 
>+	err = ptp_ocp_set_pins(bp);
>+	if (err)
>+		return err;
> 	ptp_ocp_sma_init(bp);
> 
> 	err = ptp_ocp_attr_group_add(bp, art_timecard_groups);
>@@ -2689,16 +2731,9 @@ sma4_show(struct device *dev, struct device_attribute *attr, char *buf)
> }
> 
> static int
>-ptp_ocp_sma_store(struct ptp_ocp *bp, const char *buf, int sma_nr)
>+ptp_ocp_sma_store_val(struct ptp_ocp *bp, int val, enum ptp_ocp_sma_mode mode, int sma_nr)
> {
> 	struct ptp_ocp_sma_connector *sma = &bp->sma[sma_nr - 1];
>-	enum ptp_ocp_sma_mode mode;
>-	int val;
>-
>-	mode = sma->mode;
>-	val = sma_parse_inputs(bp->sma_op->tbl, buf, &mode);
>-	if (val < 0)
>-		return val;
> 
> 	if (sma->fixed_dir && (mode != sma->mode || val & SMA_DISABLE))
> 		return -EOPNOTSUPP;
>@@ -2733,6 +2768,20 @@ ptp_ocp_sma_store(struct ptp_ocp *bp, const char *buf, int sma_nr)
> 	return val;
> }
> 
>+static int
>+ptp_ocp_sma_store(struct ptp_ocp *bp, const char *buf, int sma_nr)
>+{
>+	struct ptp_ocp_sma_connector *sma = &bp->sma[sma_nr - 1];
>+	enum ptp_ocp_sma_mode mode;
>+	int val;
>+
>+	mode = sma->mode;
>+	val = sma_parse_inputs(bp->sma_op->tbl, buf, &mode);
>+	if (val < 0)
>+		return val;
>+	return ptp_ocp_sma_store_val(bp, val, mode, sma_nr);
>+}
>+
> static ssize_t
> sma1_store(struct device *dev, struct device_attribute *attr,
> 	   const char *buf, size_t count)
>@@ -4171,12 +4220,148 @@ ptp_ocp_detach(struct ptp_ocp *bp)
> 	device_unregister(&bp->dev);
> }
> 
>+static int ptp_ocp_dpll_lock_status_get(const struct dpll_device *dpll,
>+					void *priv,
>+					enum dpll_lock_status *status,
>+					struct netlink_ext_ack *extack)
>+{
>+	struct ptp_ocp *bp = priv;
>+	int sync;
>+
>+	sync = ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC;
>+	*status = sync ? DPLL_LOCK_STATUS_LOCKED : DPLL_LOCK_STATUS_UNLOCKED;
>+
>+	return 0;
>+}
>+
>+static int ptp_ocp_dpll_source_idx_get(const struct dpll_device *dpll,
>+				       void *priv, u32 *idx,
>+				       struct netlink_ext_ack *extack)

As I wrote in the other reply, this should be removed as it is a
leftover and is never called. You should implement pin op to get a state
on dpll instead.


>+{
>+	struct ptp_ocp *bp = priv;
>+
>+	if (bp->pps_select) {
>+		*idx = ioread32(&bp->pps_select->gpio1);
>+		return 0;
>+	}
>+	return -EINVAL;
>+}
>+
>+static int ptp_ocp_dpll_mode_get(const struct dpll_device *dpll, void *priv,
>+				 u32 *mode, struct netlink_ext_ack *extack)
>+{
>+	*mode = DPLL_MODE_AUTOMATIC;
>+	return 0;
>+}
>+
>+static bool ptp_ocp_dpll_mode_supported(const struct dpll_device *dpll,
>+					void *priv, const enum dpll_mode mode,
>+					struct netlink_ext_ack *extack)
>+{
>+	return mode == DPLL_MODE_AUTOMATIC;
>+}
>+
>+static int ptp_ocp_dpll_direction_get(const struct dpll_pin *pin,
>+				      void *pin_priv,
>+				      const struct dpll_device *dpll,
>+				      void *priv,
>+				      enum dpll_pin_direction *direction,
>+				      struct netlink_ext_ack *extack)
>+{
>+	struct ptp_ocp_sma_connector *sma = pin_priv;
>+
>+	*direction = sma->mode == SMA_MODE_IN ?
>+				  DPLL_PIN_DIRECTION_INPUT :
>+				  DPLL_PIN_DIRECTION_OUTPUT;
>+	return 0;
>+}
>+
>+static int ptp_ocp_dpll_direction_set(const struct dpll_pin *pin,
>+				      void *pin_priv,
>+				      const struct dpll_device *dpll,
>+				      void *dpll_priv,
>+				      enum dpll_pin_direction direction,
>+				      struct netlink_ext_ack *extack)
>+{
>+	struct ptp_ocp_sma_connector *sma = pin_priv;
>+	struct ptp_ocp *bp = dpll_priv;
>+	enum ptp_ocp_sma_mode mode;
>+	int sma_nr = (sma - bp->sma);
>+
>+	if (sma->fixed_dir)
>+		return -EOPNOTSUPP;
>+	mode = direction == DPLL_PIN_DIRECTION_INPUT ?
>+			    SMA_MODE_IN : SMA_MODE_OUT;
>+	return ptp_ocp_sma_store_val(bp, 0, mode, sma_nr);

Fill the extack message to give user a clue about what's wrong in case
of an error. You can pass the extack all the way down to
ptp_ocp_sma_store_val() and fill-up the msg there.
Call it with NULL from ptp_ocp_sma_store().


>+}
>+
>+static int ptp_ocp_dpll_frequency_set(const struct dpll_pin *pin,
>+				      void *pin_priv,
>+				      const struct dpll_device *dpll,
>+				      void *dpll_priv, u64 frequency,
>+				      struct netlink_ext_ack *extack)
>+{
>+	struct ptp_ocp_sma_connector *sma = pin_priv;
>+	struct ptp_ocp *bp = dpll_priv;
>+	const struct ocp_selector *tbl;
>+	int sma_nr = (sma - bp->sma);

No need for "()" here. Drop it.


>+	int val, i;
>+
>+	if (sma->fixed_fcn)
>+		return -EOPNOTSUPP;

Fill the extack message to give user a clue about what's wrong.


>+
>+	tbl = bp->sma_op->tbl[sma->mode];
>+	for (i = 0; tbl[i].name; i++)
>+		if (tbl[i].frequency == frequency)
>+			return ptp_ocp_sma_store_val(bp, val, sma->mode, sma_nr);

Fill the extack message to give user a clue about what's wrong in case
of an error.


>+	return -EINVAL;

Fill the extack message to give user a clue about what's wrong.


>+}
>+
>+static int ptp_ocp_dpll_frequency_get(const struct dpll_pin *pin,
>+				      void *pin_priv,
>+				      const struct dpll_device *dpll,
>+				      void *dpll_priv, u64 *frequency,
>+				      struct netlink_ext_ack *extack)
>+{
>+	struct ptp_ocp_sma_connector *sma = pin_priv;
>+	struct ptp_ocp *bp = dpll_priv;
>+	const struct ocp_selector *tbl;
>+	int sma_nr = (sma - bp->sma);

No need for "()" here. Drop it.


>+	u32 val;
>+	int i;
>+
>+	val = bp->sma_op->get(bp, sma_nr);
>+	tbl = bp->sma_op->tbl[sma->mode];
>+	for (i = 0; tbl[i].name; i++)
>+		if (val == tbl[i].value) {
>+			*frequency = tbl[i].frequency;
>+			return 0;
>+		}
>+
>+	return -EINVAL;

How can this happen? Isn't it a driver bug if it does? In that case,
please consider WARN_ON_ONCE() here.
Of if this can happen, fill the extack message to give user a clue
about what's wrong.


>+}
>+
>+static const struct dpll_device_ops dpll_ops = {
>+	.lock_status_get = ptp_ocp_dpll_lock_status_get,
>+	.source_pin_idx_get = ptp_ocp_dpll_source_idx_get,
>+	.mode_get = ptp_ocp_dpll_mode_get,
>+	.mode_supported = ptp_ocp_dpll_mode_supported,
>+};
>+
>+static const struct dpll_pin_ops dpll_pins_ops = {
>+	.frequency_get = ptp_ocp_dpll_frequency_get,
>+	.frequency_set = ptp_ocp_dpll_frequency_set,
>+	.direction_get = ptp_ocp_dpll_direction_get,
>+	.direction_set = ptp_ocp_dpll_direction_set,
>+};

For the record, you still miss the notifications. I know that you wrote
you plan to add them, just don't want to forget about them.


>+
> static int
> ptp_ocp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> {
> 	struct devlink *devlink;
> 	struct ptp_ocp *bp;
>-	int err;
>+	int err, i;
>+	u64 clkid;
> 
> 	devlink = devlink_alloc(&ptp_ocp_devlink_ops, sizeof(*bp), &pdev->dev);
> 	if (!devlink) {
>@@ -4226,8 +4411,39 @@ ptp_ocp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> 
> 	ptp_ocp_info(bp);
> 	devlink_register(devlink);
>-	return 0;
> 
>+	clkid = pci_get_dsn(pdev);
>+	bp->dpll = dpll_device_get(clkid, 0, THIS_MODULE);
>+	if (IS_ERR(bp->dpll)) {
>+		dev_err(&pdev->dev, "dpll_device_alloc failed\n");
>+		goto out;
>+	}
>+
>+	err = dpll_device_register(bp->dpll, DPLL_TYPE_PPS, &dpll_ops, bp);
>+	if (err)
>+		goto out;
>+
>+	for (i = 0; i < OCP_SMA_NUM; i++) {
>+		bp->sma[i].dpll_pin = dpll_pin_get(clkid, i, THIS_MODULE, &bp->sma[i].dpll_prop);
>+		if (IS_ERR(bp->sma[i].dpll_pin))
>+			goto out_dpll;
>+
>+		err = dpll_pin_register(bp->dpll, bp->sma[i].dpll_pin, &dpll_pins_ops,
>+					&bp->sma[i]);
>+		if (err) {
>+			dpll_pin_put(bp->sma[i].dpll_pin);

You should do this in error path, not here. Have and extra later to jump
in between dpll_pin_unregister() and dpll_pin_put().


>+			goto out_dpll;
>+		}
>+	}
>+
>+	return 0;
>+out_dpll:
>+	while (i) {
>+		--i;

while (i--) {

instead?


>+		dpll_pin_unregister(bp->dpll, bp->sma[i].dpll_pin, &dpll_pins_ops, &bp->sma[i]);
>+		dpll_pin_put(bp->sma[i].dpll_pin);
>+	}

You are missing dpll_device_unregister() here. Please fix your error
path.

>+	dpll_device_put(bp->dpll);

You are missing devlink_unregister() here. Please fix your error path.

A hint: The error path should be in sync with what you have in
ptp_ocp_remove().


> out:
> 	ptp_ocp_detach(bp);
> out_disable:
>@@ -4242,7 +4458,16 @@ ptp_ocp_remove(struct pci_dev *pdev)
> {
> 	struct ptp_ocp *bp = pci_get_drvdata(pdev);
> 	struct devlink *devlink = priv_to_devlink(bp);
>+	int i;
> 
>+	for (i = 0; i < OCP_SMA_NUM; i++) {
>+		if (bp->sma[i].dpll_pin) {
>+			dpll_pin_unregister(bp->dpll, bp->sma[i].dpll_pin, &dpll_pins_ops, bp);
>+			dpll_pin_put(bp->sma[i].dpll_pin);
>+		}
>+	}
>+	dpll_device_unregister(bp->dpll, &dpll_ops, bp);
>+	dpll_device_put(bp->dpll);
> 	devlink_unregister(devlink);
> 	ptp_ocp_detach(bp);
> 	pci_disable_device(pdev);
>-- 
>2.37.3
>