Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Valentin Caron <valentin.caron@foss.st.com>
To:     Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Alain Volmat <alain.volmat@foss.st.com>
CC:     <linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        Valentin Caron <valentin.caron@foss.st.com>
Subject: [PATCH v3 0/4] spi: stm32: add spi device mode
Date:   Thu, 15 Jun 2023 09:58:11 +0200
Message-ID: <20230615075815.310261-1-valentin.caron@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

STM32 SPI can operate in device mode.
This series adds this functionnality in spi-stm32 driver.

Since v2:
 - Rename this series: spi device mode

Since v1:
 - Do not add #address-cells and #size-cells in st,stm32-spi.yaml
 - Do not add cs-gpio description in st,stm32-spi.yaml
 - Do not add st,spi-slave-underrun property to handle spi slave underrun

Alain Volmat (3):
  spi: stm32: renaming of spi_master into spi_controller
  spi: stm32: use dmaengine_terminate_{a}sync instead of _all
  dt-bindings: spi: stm32: disable spi-slave property for stm32f4-f7

Valentin Caron (1):
  spi: stm32: introduction of stm32h7 SPI device mode support

 .../devicetree/bindings/spi/st,stm32-spi.yaml |   1 +
 drivers/spi/Kconfig                           |   1 +
 drivers/spi/spi-stm32.c                       | 274 ++++++++++--------
 3 files changed, 161 insertions(+), 115 deletions(-)

-- 
2.25.1