Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Laurent Dufour <ldufour@linux.ibm.com>
To:     linux-kernel@vger.kernel.org
Cc:     linux-arch@vger.kernel.org, x86@kernel.org,
        linuxppc-dev@lists.ozlabs.org, mpe@ellerman.id.au,
        npiggin@gmail.com, christophe.leroy@csgroup.eu, tglx@linutronix.de,
        dave.hansen@linux.intel.com, mingo@redhat.com, bp@alien8.de
Subject: [PATCH 08/10] powerpc/pseries: Initialise CPU hotplug callbacks earlier
Date:   Thu, 15 Jun 2023 17:46:33 +0200
Message-ID: <20230615154635.13660-9-ldufour@linux.ibm.com>
In-Reply-To: <20230615154635.13660-1-ldufour@linux.ibm.com>
References: <20230615154635.13660-1-ldufour@linux.ibm.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Michael Ellerman <mpe@ellerman.id.au>

As part of the generic HOTPLUG_SMT code, there is support for disabling
secondary SMT threads at boot time, by passing "nosmt" on the kernel
command line.

The way that is implemented is the secondary threads are brought partly
online, and then taken back offline again. That is done to support x86
CPUs needing certain initialisation done on all threads. However powerpc
has similar needs, see commit d70a54e2d085 ("powerpc/powernv: Ignore
smt-enabled on Power8 and later").

For that to work the powerpc CPU hotplug callbacks need to be registered
before secondary CPUs are brought online, otherwise __cpu_disable()
fails due to smp_ops->cpu_disable being NULL.

So split the basic initialisation into pseries_cpu_hotplug_init() which
can be called early from setup_arch(). The DLPAR related initialisation
can still be done later, because it needs to do allocations.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/pseries/hotplug-cpu.c | 22 ++++++++++++--------
 arch/powerpc/platforms/pseries/pseries.h     |  2 ++
 arch/powerpc/platforms/pseries/setup.c       |  2 ++
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 1a3cb313976a..61fb7cb00880 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -845,15 +845,9 @@ static struct notifier_block pseries_smp_nb = {
 	.notifier_call = pseries_smp_notifier,
 };
 
-static int __init pseries_cpu_hotplug_init(void)
+void __init pseries_cpu_hotplug_init(void)
 {
 	int qcss_tok;
-	unsigned int node;
-
-#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-	ppc_md.cpu_probe = dlpar_cpu_probe;
-	ppc_md.cpu_release = dlpar_cpu_release;
-#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
 
 	rtas_stop_self_token = rtas_function_token(RTAS_FN_STOP_SELF);
 	qcss_tok = rtas_function_token(RTAS_FN_QUERY_CPU_STOPPED_STATE);
@@ -862,12 +856,22 @@ static int __init pseries_cpu_hotplug_init(void)
 			qcss_tok == RTAS_UNKNOWN_SERVICE) {
 		printk(KERN_INFO "CPU Hotplug not supported by firmware "
 				"- disabling.\n");
-		return 0;
+		return;
 	}
 
 	smp_ops->cpu_offline_self = pseries_cpu_offline_self;
 	smp_ops->cpu_disable = pseries_cpu_disable;
 	smp_ops->cpu_die = pseries_cpu_die;
+}
+
+static int __init pseries_dlpar_init(void)
+{
+	unsigned int node;
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	ppc_md.cpu_probe = dlpar_cpu_probe;
+	ppc_md.cpu_release = dlpar_cpu_release;
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
 
 	/* Processors can be added/removed only on LPAR */
 	if (firmware_has_feature(FW_FEATURE_LPAR)) {
@@ -886,4 +890,4 @@ static int __init pseries_cpu_hotplug_init(void)
 
 	return 0;
 }
-machine_arch_initcall(pseries, pseries_cpu_hotplug_init);
+machine_arch_initcall(pseries, pseries_dlpar_init);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index f8bce40ebd0c..f8893ba46e83 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -75,11 +75,13 @@ static inline int dlpar_hp_pmem(struct pseries_hp_errorlog *hp_elog)
 
 #ifdef CONFIG_HOTPLUG_CPU
 int dlpar_cpu(struct pseries_hp_errorlog *hp_elog);
+void pseries_cpu_hotplug_init(void);
 #else
 static inline int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
 {
 	return -EOPNOTSUPP;
 }
+static inline void pseries_cpu_hotplug_init(void) { }
 #endif
 
 /* PCI root bridge prepare function override for pseries */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index e2a57cfa6c83..41451b76c6e5 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -816,6 +816,8 @@ static void __init pSeries_setup_arch(void)
 	/* Discover PIC type and setup ppc_md accordingly */
 	smp_init_pseries();
 
+	// Setup CPU hotplug callbacks
+	pseries_cpu_hotplug_init();
 
 	if (radix_enabled() && !mmu_has_feature(MMU_FTR_GTSE))
 		if (!firmware_has_feature(FW_FEATURE_RPT_INVALIDATE))
-- 
2.41.0